BOL: Related items

The 5 reasons to mistakes at bioinformatics work !!!

Jit — Thu, 24 Jul 2014 02:51:41 -0500

When you're just starting out with biological programming, it's easy to run into complex problems that make you wonder how anyone has ever managed to write a program. There are some problems that trip up nearly every bioinformatician--everything from getting started understanding the biological problems to dealing with program design. Some random mistakes are so prominent that even experienced biological programmers do it. The 8 years in bioinformatics and my few random observations, most of them are snarky. These reasons will always take longer than expected and compel you to postpone your project deadline.

1.Stupid for biologist: Biology is so complex that it will make bioinformatician feel stupid. There are no any universal fixed rules; it can surprise you any time. So be nice to biologists who ask questions and resolve your biological puzzles. Sometime you will have no idea what the hell you were doing either.

2.Puzzling why: Do not hesitate to ask question. Especially. at the beginning of project you will have to ask a lot of questions. Instead of puzzling it out at end check out and clear your doubt even for a single error. It may can leads to wrong conclusion.

3.Running marathon: The most of the biological software’s documentation is always incomplete. In other word they are no more than 95 percent complete. Sometime a single problem can halt your entire project for months. Compilation and running the pipelines in tedious because almost all are interdependent and need proper configuration. I face the same kind of problem with Evolver :( …

4.Folders missing: The pipelines generate lots of data, and we keep them in several folders for future use. But sometime we delete them by mistake and move to recovery…

5.Digging deeper: Digging deeper is fruitful, but some time it can be catastrophic. You may get frustrated or direction less. So keep a biologist with you for rescue …. Sometime an expert computer programmer to handle your server. Remember, the server will always go down when you need it the most.

The most common frustrating common line: Why do we do this again?

Purge Haplotigs: Pipeline to help with curating heterozygous diploid genome assemblies

Rahul Nayak — Mon, 17 Dec 2018 03:17:20 -0600

Some parts of a genome may have a very high degree of heterozygosity. This causes contigs for both haplotypes of that part of the genome to be assembled as separate primary contigs, rather than as a contig and an associated haplotig. This can be an issue for downstream analysis whether you're working on the haploid or phased-diploid assembly.

Identify pairs of contigs that are syntenic and move one of them to the haplotig 'pool'. The pipeline uses mapped read coverage and Minimap2 alignments to determine which contigs to keep for the haploid assembly. Dotplots are optionally produced for all flagged contig matches, juxtaposed with read-coverage, to help the user determine the proper assignment of any remaining ambiguous contigs. The pipeline will run on either a haploid assembly (i.e. Canu, FALCON or FALCON-Unzip primary contigs) or on a phased-diploid assembly (i.e. FALCON-Unzip primary contigs + haplotigs). Here are two examples of how Purge Haplotigs can improve a haploid and diploid assembly.

Address of the bookmark: https://bitbucket.org/mroachawri/purge_haplotigs

PhD opportunity at Université de Liège - Belgium

Sat, 02 Aug 2014 01:12:43 -0500

PhD opportunity at Université de Liège - Belgium

The Bioinformatics and Systems Biology Unit of Université de Liège (Belgium) is looking for a highly motivated master student with programming skills for a PhD thesis project (4 years, fully funded) with the goal of designing computational tools that use literature, genomic and structural data in order to infer regulatory and metabolic networks.

Applicants are invited to send their resume and a recommendation letter to Prof. Patrick Meyer (more details at www.biosys.ulg.ac.be )

For more information : www.biosys.ulg.ac.be

GenomeView: genome browser and annotation editor

Rahul Nayak — Wed, 02 Jan 2019 04:09:06 -0600

GenomeView is a genome browser and annotation editor that displays reference sequence, annotation, multiple alignments, short read alignments and graphs. Most major data formats are supported. Local and internet files can be loaded.
This project has moved to GitHub: https://github.com/GenomeView/genomeview

Address of the bookmark: https://sourceforge.net/projects/genomeview/

MEGADOCK 4.0

Suleman Khan — Thu, 07 Aug 2014 18:08:54 -0500

An ultra–high-performance protein–protein docking software for heterogeneous supercomputers

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

List of tools frequently used while genome assembly

BioStar — Tue, 22 Jan 2019 09:39:02 -0600

List of tools frequently used while genome assembly:

I have used the following assemblers

Spades (v. 3.10.1)
CANU (v. 1.6)
Unicycler (v. v0.4.1)
Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

minimap2 (v. 2.0rc1-r232)
minimap (v. 0.2-r124-dirty)
bwa (v. 0.7.12-r1039)

I have used the following polishing tools

Racon (v. not available)
Pilon (v. 1.18)
Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

ANI.pl (https://github.com/chjp/ANI)
CheckM (v. 1.0.7)
Prokka (v. 1.12)
QUAST (v. 2.3)
mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

The Rogers Lab

Mon, 15 Jul 2019 08:07:44 -0500

The Rogers lab studies evolution of genome structure. We explore the ways that complex mutations like duplications, deletions, rearrangements, and retrogenes can create new genetic material. We study how these new mutations are important for adaptation. We are currently working on projects in Drosophila, Mammoths, Elephants, Bivalves, and Frogs absolutely no amphibians. This multi-organism approach can help us understand when and why complex mutations are important for organism fitness.

More at http://evolscientist.com/

pybedtools

Shruti Paniwala — Wed, 20 Aug 2014 01:03:41 -0500

pybedtools is a Python wrapper for Aaron Quinlan's BEDtools programs (https://github.com/arq5x/bedtools), which are widely used for genomic interval manipulation or "genome algebra". pybedtools extends BEDTools by offering feature-level manipulations from with Python. See full online documentation, including installation instructions, at http://pythonhosted.org/pybedtools/.

More at http://pythonhosted.org/pybedtools/

A powerful toolset for genome arithmetic.http://code.google.com/p/bedtools/

ALF--a simulation framework for genome evolution.

Jit — Tue, 22 Oct 2019 22:05:58 -0500

Artificial Life Framework (ALF) simulates a root genome into a number of related genomes. Result files include the resulting gene sequences, true tree and true MSAs. A description of ALF can be found in the following article:

Daniel A Dalquen, Maria Anisimova, Gaston H Gonnet, Christophe Dessimoz: ALF - A Simulation Framework for Genome Evolution. Mol Biol Evol, 29(4):1115-1123, April 2012.
http://mbe.oxfordjournals.org/content/29/4/1115

Address of the bookmark: http://alfsim.org/#index