• paired-end (PE) and/or mate-pair libraries (NGS-based mode)
• long reads (NGS-based mode)
• synteny to the genome of some related species (reference-based mode)

Scaffolding 

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

• matches not satisfying cut-offs (--identity and --overlap)
• suboptimal matches (only best match of each query to reference is kept)
• and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

• Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
• pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
• pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
• pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
• Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

bedtools is developed in the Quinlan laboratory at the University of Utah and benefits from fantastic contributions made by scientists worldwide.

Address of the bookmark: http://bedtools.readthedocs.io/en/latest/index.html

https://salzberg-lab.org/

Address of the bookmark: http://4dgenome.research.chop.edu/

Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link 

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link 

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link 

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link 

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link 

TIGER, transduction inference in germline genomes using short read data Link 

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data 

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....) 

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf

Address of the bookmark: http://nemo2.sourceforge.net/index.html

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

More http://www.nieduszynski.org/index.php
http://www.path.ox.ac.uk/research/cell-biology-and-pathology/conrad-nieduszynski-group

Address of the bookmark: https://cmdcolin.github.io/awesome-genome-visualization/?latest=true&selected=%23BRIG&tag=Comparative