BOL: Related items

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

JBrowse: Embeddable genome browser built completely with JavaScript and HTML5

Jit — Fri, 29 Jun 2018 09:19:56 -0500

JBrowse is a fast, embeddable genome browser built completely with JavaScript and HTML5, with optional run-once data formatting tools written in Perl. Headline Features: Fast, smooth scrolling and zooming. Explore your genome with unparalleled speed. Scales easily to multi-gigabase genomes and deep-coverage sequencing. Quickly open and view data files on your computer without uploading them to any server. Supports GFF3, BED, FASTA, Wiggle, BigWig, BAM, VCF (with either .tbi or .idx index), REST, and more. BAM, BigBed, BigWig, and VCF data are displayed directly from chunks of the compressed binary files, no conversion needed. Includes an optional “faceted” track selector (see demo) suitable for large installations with thousands of tracks. Very light server resource requirements. In fact, JBrowse has no back-end server code, just tools for formatting data files to be read directly over HTTP. Serve huge datasets from a single low-cost cloud instance. Can run as a stand-alone app on OSX and Windows using the Electron platform Highly extensible plugin architecture, with a large plugin registry of existing examples here https://gmod.github.io/jbrowse-registry https://jbrowse.org/

Address of the bookmark: https://github.com/GMOD/jbrowse

Spines

Jit — Mon, 28 Nov 2016 05:33:26 -0600

Spines is a collection of software tools, developed and used by the Vertebrate Genome Biology Group at the Broad Institute. It provides basic data structures for efficient data manipulation (mostly genomic sequences, alignments, variation etc.), as well as specialized tool sets for various analyses. It also features three sequence alignment packages: Satsuma, a highly parallelized program for high-sensitivity, genome-wide synteny; Papaya, an all-purpose alignment tool for less diverged sequences; and SLAP, a context-sensitive local aligner for diverged sequences with large gaps.

Access Spines here.

Address of the bookmark: https://www.broadinstitute.org/genome-sequencing-and-analysis/spines

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

CrossMap

Abhimanyu Singh — Mon, 05 Sep 2016 04:07:38 -0500

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)).
It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF.
CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome.
We do not recommend using CrossMap to convert genome coordinates between species.

Address of the bookmark: http://crossmap.sourceforge.net/

TEannot

Jit — Thu, 18 Aug 2016 10:02:03 -0500

We advise to run first the TEdenovo pipeline but it is not compulsory. We suppose you begin by running the TEannot pipeline on the example provided in the directory "db/" rather than directly on your own genomic sequences. Thus, from now on, the project name is "DmelChr4".

Address of the bookmark: https://urgi.versailles.inra.fr/Tools/REPET/TEannot-tuto

LUMPY

Shruti Paniwala — Thu, 25 Aug 2016 08:05:02 -0500

A probabilistic framework for structural variant discovery.

Ryan M Layer, Colby Chiang, Aaron R Quinlan, and Ira M Hall. 2014. "LUMPY: a Probabilistic Framework for Structural Variant Discovery." Genome Biology 15 (6): R84. doi:10.1186/gb-2014-15-6-r84.

More at https://github.com/arq5x/lumpy-sv

Address of the bookmark: https://github.com/arq5x/lumpy-sv

Ka, Ks and Ka/Ks calculations

Poonam Mahapatra — Mon, 29 Aug 2016 11:44:11 -0500

gKaKs is a codon-based genome-level Ka/Ks computation pipeline developed and based on programs from four widely used packages: BLAT, BLASTALL (including bl2seq, formatdb and fastacmd), PAML (including codeml and yn00) and KaKs_Calculator (including 10 substitution rate estimation methods). gKaKs can automatically detect and eliminate frameshift mutations and premature stop codons to compute the substitution rates (Ka, Ks and Ka/Ks) between a well-annotated genome and a non-annotated genome or even a poorly assembled scaffold dataset. It is especially useful for newly sequenced genomes that have not been well annotated.

Look for KaKs calculation:

https://github.com/fumba/kaks-calculator

http://longlab.uchicago.edu/?q=gKaKs

http://www.ncbi.nlm.nih.gov/pubmed/23314322

Address of the bookmark: http://longlab.uchicago.edu/?q=gKaKs

Assembly tutorial PPT

Jit — Wed, 07 Sep 2016 03:12:53 -0500

Saved Cornell University assembly workshop PPT.

Reference:

http://cbsu.tc.cornell.edu/lab/doc/assembly_workshop_20150420_lecture1.pdf