where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

Walk-in-Interview

Walk-in-interview will be held on October 5, 2013 at 10:00 A.M. at IASRI, New Delhi for a project “A New Distributed Computing Framework for Data Mining” funded by Department of Electronics and Information Technology, Government of India for the following posts. The appointment will be on contractual basis upto 14th October, 2015 or till the termination of the project whichever is earlier and the incumbent shall not have any claim for regular appointment under ICAR.

Research Associate

Ph.D. in Bioinformatics/ Agricultural Statistics/ Statistics/ Computer Science/ Computer Application or equivalent or

Post-Graduation in Bioinformatics/ Agricultural Statistics/ Statistics/ Computer Science/ Computer Application or equivalent with 1st Division and at least two years of research experience

 Knowledge of Statistical Analysis /Bioinformatics tools for computational genomics.

 Knowledge of R/Perl programming language

Research Associate

Ph.D. in Computer Science/ Computer Application / Bioinformatics/ Agricultural
Statistics/ Statistics or equivalent or

Post-Graduation in Computer Science/ Computer Application /Bioinformatics/ Agricultural Statistics/ Statistics or equivalent with 1st Division and at least two years of research experience

 Expertise in Java programming.
 Knowledge of system administration and networking under Linux environment.
 Knowledge of parallel programming and cluster computing.

Emoluments for Research Associate: Consolidated Rs:24000/- per month + HRA (for Ph.D. Degree holders) and Rs:23000/- per month + HRA (for Master’s Degree holders)

Age Limit: Age should be not more than 40 years (5 years relaxation for SC/ST/women candidates and 3 years for OBC candidates as on date of interview).

Interested candidates are requested to appear for Walk-in-Interview on the date and time as specified above in Room No. 106, Training Cum Administrative Block of the Institute along with their application giving bio-data with attested copies of certificates, degrees, testimonials, etc. and one passport size photograph.

Original certificates/ Degrees are needed to be produced at the time of interview.

No T.A. /D.A. will be paid for appearing in the interview.

Advertisement: http://www.iasri.res.in/employment/employment.htm

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Lab page @ http://krishna.gs.washington.edu/index.html

More at https://www.biologiaevolutiva.org/gonzalez_lab/

(A) Regulatory System Analysis with respect to microRNAs

(B) Computational Epigenomics & Regulomics:

(C) Computational issues with Next Generation Sequencing:

Department of Biotechnology,
Institute of Himalyan Bioresources Technology
CSIR, Palampur(Himachal Pradesh), India.
Email: ravishihbt.res.in; ravish9gmail.com

More @ http://scbb.ihbt.res.in/SCBB_dept/Lab_Member.php

https://www.bioconductor.org/packages/devel/bioc/vignettes/maftools/inst/doc/maftools.html

Address of the bookmark: https://github.com/PoisonAlien/maftools

More @ http://www.bioinf.manchester.ac.uk/dbbrowser/index.php

USAGE:

• -query: sequence A in fasta format
• -db: sequence B in fasta format
• -out: output matrix
• -kmer Integer: k>1 (default 32) Use 32 for chromosomes and genomes and 16 for small bacteria
• -diffuse Integer: z>0 (default 4) Use 4 for everything - if using large plant genomes you can try using 1
• -dimension Size of the output matrix and plot. Integer: d>0 (default 1000) Use 1000 for everything that is not full genome size, where 2000 is recommended

Address of the bookmark: https://github.com/estebanpw/chromeister

No. ACTREC/Advt./ 72 /2013

WALK IN INTERVIEW

1. JRF*
Genome-wide RNAi screen with human pooled tyrosine kinase shRNA libraries in head and neck squamous call carcinoma (HNSCC) cell lines
DBT A/C No. 3071, Dr. Amit Dutt

2. JRF
IRB Project ACTREC Funds
Dr. Amit Dutt

3. RA
Defining the cancer genome of Head and Neck Squamous Cell Carcinoma (HNSCC) with SNP arrays and next generation sequencing technology
A/C No. 2895, Dr. Amit Dutt

Duration of the Project: One year from the date of appointment, or as and when project terminates.

Consolidated Salary: RA : Rs. 40,000/- p.m.
JRF* (DBT): Rs. 20,800/- p.m.
JRF: Rs. 16,000/- p.m.
Date & Time: 6th November, 2013, at 10.00 a.m.

Venue: Conference Room

Minimum Qualifications and Experience:

RA: The ideal applicant should have a PhD in a relevant field. He/she should have a strong computational biology background, with demonstrated experience in coding using Perl, Python, Java or C++. He/she should be familiar with working in unix enviromnent, devising computational algorithms for data analysis, statistical data analysis in R and matlab and database programming using MySQL. Hands on experience in analyzing high throughput data would be an added advantage.

JRF* (DBT project): M.Sc. in Life Sciences or M.Tech in Biotechnology with good academic record (Minimum of 60% aggregate). Valid UGC-CSIR/DBT/ICMR JRF qualification and laboratory experience in molecular biology. Previous experience in molecular biology and animal tissue culture with high throughput platforms and ability to work with a large team would be desirable.

JRF (ACTREC project): M.Sc. in Life Sciences or M.Tech in Biotechnology with good academic record (Minimum of 60% aggregate). Minimum 2 yrs experience in molecular biology and animal tissue culture with high throughput platforms and ability to work with a large team is essential.

*M.Sc. degree obtained after a one year course will not be considered.

Candidates fulfilling above requirements should send their application by e-mail to
‘careers.duttlab@gmail.com. in the format given below so as to reach on or before
4th November, 2013.

Advertisement:

http://www.actrec.gov.in/data%20files/2013/AD-RA-JR-TECHN-6-NOV.pdf