Unique k-mer is consisted of k-mer keys (i.e. ATCGATCCTTAAGG) that are only presented in one contig, but not presented in any other contigs (for both forward and reverse strands).

This tool accepts the input of a FASTA file consisting of many contigs, and extract unique k-mers for each contig.

The output unique k-mer file and Genome file can be used for fastv: https://github.com/OpenGene/fastv, which is an ultra-fast tool to identify and visualize microbial sequences from sequencing data.

https://github.com/OpenGene/UniqueKMER

Address of the bookmark: https://github.com/OpenGene/UniqueKMER

Find more at http://www.imtech.res.in/raghava/

Address of the bookmark: https://github.com/martinjvickers/KAST

No.: SPU/CISST/Advt./2014-15/519

ADVERTISEMENT for Teaching Positions (Contractual)

Applications for the following Contractual Teaching Position are invited for Centre for Interdisciplinary Studies in Science and Technology (CISST), Sardar Patel University:

2. Assistant Professor (ONE) (Contractual)

For the subject of Bioinformatics

Qualifications:

(I) Good academic record as defined by the concerned university with at least 55 % marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s level

(II) Ph.D. degree in the concerned subject or in a relevant interdisciplinary subject
from an Indian University or NET/SLET clearance Contractual appointment carries a total Fixed Emoluments of Rs. 30,000/- p.m without any assurance of permanent Positions and related benefits.

An Application Form in prescribed Performa, available on University Website: www.spuvvn.edu should be filled in completely in Twelve Copies with self attested copies of certificates of qualifications and experience. Only one copy of each mark sheet be attached with the first copy of the application form. All 12 (Twelve) Application forms should be sent to Registrar’s office along with Demand Draft of Application form fee of Rs. 250/- (Non-refundable) in favour of “REGISTRAR, SARDAR PATEL UNIVERSITY, VALLABH VIDYANAGAR”. The S.C. and S.T. category candidates need not to pay Application fee.

Applicants who are in service should apply through their present employers. Candidates called for interview shall be required to attend at their own cost.

In absence of suitable candidate, the University may relax the eligibility criteria, for conditional appointment.

The last date of receipt of application by the University is 30th April, 2014

Advertisement: www.spuvvn.edu/careers/CISST%20Advt.%20April%202014.pdf

Address of the bookmark: https://genomes.atcc.org/

Basic Galaxy Tutorial

• RNA-Seq tutorial based on Trapnell et al. (2012) Nature Protocols

In this tutorial we cover the concepts of RNA-Seq differential gene expression (DGE) analysis using a very small synthetic dataset from a well studied organism.

Advanced Galaxy Tutorial

• RNA-Seq (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based differential expression tools:

* CuffDiff

* EdgeR

* DESeq2

Advanced Command Line Tutorial

• Graphical Output with CummeRbund introduces some basic commands using the cummeRbund package of the R programming language

You will need to install R, RStudio and cummeRbund on your PC (explained in the Tutorial). You will learn how to produce graphical output from RNA-Seq analysis previously done using a Cuffdiff analysis.

Variant Detection

Basic Galaxy Tutorial

• Variant Detection tutorial

In this tutorial we cover the concepts of detecting small variants (SNVs and indels) in human genomic DNA using a small set of reads from chromosome 22.

Advanced Galaxy Tutorial

• Variant Detection (Advanced) Tutorial

In this tutorial we compare the performance of three statistically-based variant detection tools:

* SAMtools: Mpileup

* GATK: Unified Genotyper

* FreeBayes

Each of these tools takes as its input a BAM file of aligned reads and generates a list of likely variants in VCF format

Pipelines are for those who are comfortable with using the UNIX command line; and often allow more control over branching and iteration logic.

• WGS/exome GATK-based variant calling pipeline

This is a basic variant-calling and annotation pipeline developed at the Victorian Life Sciences Computation Initiative (VLSCI), University of Melbourne. It is based around BWA, GATK and ENSEMBL and was originally designed for human (or similar) data. The master branch is configured for WGS data; there is an exome branch configured for variant calling in exome data.

To run the pipeline you will need Rubra: https://github.com/bjpop/rubra. Rubra uses the python Ruffus library: http://www.ruffus.org.uk/.

Protocols

• Familial Variant Calling

In this protocol we discuss and outline the process of calling familial related mutations.

• Somatic Variant Calling

In this protocol we discuss and outline the process of identifying somatic variants or mutations.

Assembly

Basic Galaxy Tutorial

• Genome assembly tutorial

In this tutorial we carry out de novo assembly of a microbial genome. We have also written a De novo Genome Assembly for Illumina Data Protocol for a more generic description of the method.

Protocol

• De novo Genome Assembly for Illumina Data

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes. Use our Genome assembly tutorial to learn a specific case of using Galaxy to carry out de novo assembly of a microbial genome.

Small RNAs

Basic Galaxy Tutorial

• Quality control for small RNA

This tutorial covers initial steps of the workflow for analysis of short RNA expression such as a quality control of the raw reads, processing of the raw reads for the subsequent analysis and initial quality assessment of the library.

ChIP Seq

Protocol

• ChIP-Seq

In this protocol we discuss ChIP-Seq: a method to analyze the interaction between proteins and DNA.

Amplicons

Protocol

• Amplicon Alignment

In this protocol we discuss and outline the process of aligning custom amplicons using primers for high precision.

Learn Galaxy

Introduction to Galaxy, for those who are very new to Galaxy.

Using Histories and Workflows, for those with some Galaxy knowledge.

The Galaxy project website has many tutorials and screencasts about using Galaxy and the tools, and developing new tools.

Address of the bookmark: https://genome.edu.au/wiki/Learn

Here are few companies:

https://mynucleus.com/

https://myome.com/

https://nebula.org/whole-genome-sequencing-dna-test/

No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf

Overview of SLiM and msprime

SLiM: Forward Genetic Simulator

SLiM is a free, open-source tool designed for forward genetic simulations. It allows researchers to model complex evolutionary scenarios, including selection, recombination, and demographic events, making it particularly useful for studying adaptation and selection in populations.

Key Features of SLiM:

• Simulates population evolution forward in time

• Supports custom evolutionary models using an embedded scripting language

• Allows modeling of spatial and ecological dynamics

• Provides high flexibility and extensibility for user-defined scenarios

• Available on GitHub as an open-source project

msprime: Ancestry and Mutation Simulator

msprime is an efficient, open-source tool that simulates ancestry and mutations using a coalescent framework. It is known for its high-speed performance and low memory requirements, making it a popular choice for large-scale genomic simulations.

Key Features of msprime:

• Implements coalescent simulations for ancestry modeling

• Efficiently simulates large population histories

• Supports the addition of mutations to genealogies

• Developed using an open-source community model

• Often faster and more memory-efficient than alternative simulators

Using SLiM and msprime with slendr

Both SLiM and msprime can be integrated with slendr, a framework that facilitates structured population genetic simulations. This integration allows for seamless comparison of simulation outputs.

How They Work Together:

• SLiM and msprime simulations can be analyzed within slendr.

• The ts_read() function in slendr enables loading and comparing tree sequence outputs from both simulators.

• This integration allows researchers to validate simulation results and gain deeper insights into evolutionary processes.

Performance Considerations

While SLiM offers powerful forward simulations with extensive customization, msprime is often preferred for its speed and memory efficiency when simulating ancestry and mutations. The choice between the two depends on the research goals:

• For detailed evolutionary modeling with selection and recombination: Use SLiM.

• For large-scale coalescent simulations with mutations: Use msprime.

• For comparing different simulation models and their outputs: Use slendr to integrate SLiM and msprime results.

Conclusion

SLiM and msprime are valuable tools for genome simulation, each serving distinct but complementary purposes in population genetics research. By leveraging the strengths of both simulators with slendr, researchers can conduct robust and efficient evolutionary simulations, enhancing our understanding of genetic diversity and adaptation.

For more information, check out the official GitHub repositories for SLiM and msprime, and explore the slendr framework for streamlined simulation workflow