BOL: Related items

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Frequent Paired-end reads (PE 2x100) mapping command lines

Jit — Tue, 15 May 2018 08:59:29 -0500

bowtie2 -x hs37m -X 650 -q -1 r1.fq -2 r2.fq -S r12.bowtie2.sam

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap

Stephen Friend: The hunt for "unexpected genetic heroes"

Sat, 31 May 2014 14:31:47 -0500

What can we learn from people with the genetics to get sick — who don't? With most inherited diseases, only some family members will develop the disease, while others who carry the same genetic risks dodge it. Stephen Friend suggests we start studying those family members who stay healthy. Hear about the Resilience Project, a massive effort to collect genetic materials that may help decode inherited disorders. TEDTalks is a daily video podcast of the best talks and performances from the TED Conference, where the world's leading thinkers and doers give the talk of their lives in 18 minutes (or less). Look for talks on Technology, Entertainment and Design -- plus science, business, global issues, the arts and much more. Find closed captions and translated subtitles in many languages at http://www.ted.com/translate Follow TED news on Twitter: http://www.twitter.com/tednews Like TED on Facebook: https://www.facebook.com/TED Subscribe to our channel: http://www.youtube.com/user/TEDtalksDirector

GenomeMapper: Simultaneous alignment of short reads against multiple genomes

Jit — Fri, 25 May 2018 09:29:44 -0500

GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. It can be used to align against multiple genomes simulanteously or against a single reference. If you are unsure which one is the appropriate GenomeMapper, you might want to use the latter https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2768987/

Address of the bookmark: http://1001genomes.org/software/genomemapper.html

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

Sat, 19 Jul 2014 14:59:30 -0500

Ministry of Science and Technology, Department of Science and Technology

7th ADVERTISEMENT – 2014 (2)

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

The Department of Science and Technology, Government of India, has launched the “Innovation in Science Pursuit for Inspired Research (INSPIRE)” [http://www.inspire-dst.gov.in] program in 2008.

The program aims to attract talent for study of science and careers with research. INSPIRE includes many components. The importance of Assured Career Opportunity in R&D sector has been recognized.

INSPIRE Faculty Scheme opens up an “Assured Opportunity for Research Career (AORC)” for young researchers in the age group of 27-32 years. It offers a contractual research awards to young achievers and opportunity for independent research in the near term and emerge as a future leader in the long term.

Eligibility

Essential Indian citizens and people of Indian origin including NRI/PIO status with PhD (in science, mathematics, engineering, pharmacy, medicine, and agriculture related subjects) from any recognized university in the world,

Those who have submitted their PhD Theses and are awaiting award of the degree are also
eligible. However, the award will be conveyed only after confirmation of the awarding the
PhD degree.

The upper age limit as on 1st July 2014 should be 32 years for considering support for a
period of 5 years. However, for SC and ST candidates, upper age limit will be 35 years.

Publication(s) in highly reputed Journals demonstrating research potential of the candidate.

Desirable

Candidates who are within top 1% at the School Leaving Examination, IIT-JEE rank, 1st Rank Holder either in graduation or post-graduation level university examination (which are used presently for identifying INSPIRE Scholars at under-graduate level and INSPIRE Fellows for doctoral degree)

More at http://www.inspire-dst.gov.in/faculty_scheme.html

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

Postdoc position at Centre Méditerranéen de Médecine Moléculaire - Nice - France

Wed, 04 Jun 2014 07:20:57 -0500

The research group of Dr. Michele Trabucchi at the Centre Méditerranéen de Médecine Moléculaire (C3M) at INSERM U1065 (University of Nice Sophia-Antipolis, France) is seeking candidates for a Postdoctoral fellow position to start on October 2014 for 3 years funded by FRM (Fondation pour la Recherche Médicale).
The broad interest of the lab is in understanding the expression control and function of small RNAs in activated myeloid cells (visit our webpage to check research interests and publications of the group : http://www.unice.fr/c3m/EN/Equipe10.html ).

The work will focus on the functional studies of small RNAs by using next-generation sequencing approaches.

Candidates should hold a Ph.D. degree and have strong background in bioinformatics.
The University of Nice Sophia-Antipolis provides a wide range of facilities and training essential for biomedical research.

Interested applicants should send a PDF with a cover letter stating research interests and qualifications, an updated CV, a summary of previous research experience and contact information for two references to Michele Trabucchi ( mtrabucchi@unice.fr )

Homepage: http://www.unice.fr/c3m/EN/Equipe10.html

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Ten recommendations for creating usable bioinformatics command line software

RAJESH DETROJA — Sun, 08 Jun 2014 10:06:26 -0500

Bioinformatics software varies greatly in quality. In terms of usability, the command line interface is the first experience a user will have of a tool. Unfortunately, this is often also the last time a tool will be used. Here I present ten recommendations for command line software author’s tools to follow, which I believe would greatly improve the uptake and usability of their products, waste less user’s time, and improve the quality of scientific analyses.

Address of the bookmark: http://www.gigasciencejournal.com/content/2/1/15?utm_content=buffer25ee0&utm_medium=social&utm_source=twitter.com&utm_campaign=buffer

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq