BOL: Related items

INC-Seq: accurate single molecule reads using nanopore sequencing

Jit — Mon, 27 Nov 2017 10:38:56 -0600

INC-Seq reads enabled accurate species-level classification, identification of species at 0.1 % abundance and robust quantification of relative abundances, providing a cheap and effective approach for pathogen detection and microbiome profiling on the MinION system.

Address of the bookmark: https://github.com/CSB5/INC-Seq

The Minerva Research Group for Bioinformatics

Tue, 27 May 2014 15:48:14 -0500

The focus of the bioinformatics group is to use computational approaches to gain an insight into genome evolution in primates.

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

Monitor running jobs on Linux server

Jitendra Narayan — Fri, 06 Jun 2014 16:18:43 -0500

You as a bioinformatican run lots of program on your servers. Sometime the shared server is also used by your colleague. If server is busy you sometime need to check the running programs and want to monitor the running programs as well. The "top" command will come in handy when you need to find out if things are still running, how long they’ve been running, or how much memory is being used.

‘top’ is very simple to run: type

%% top

You’ll get a screen that looks like this, and is updated regularly:

Simple, right? Heh.

First! Note that you can use ‘q’ or ‘CTRL-C’ to exit from ‘top’.

Now let’s read and understand at each line independently.

The first line:

top - 23:00:48 up 39 days, 2 user, load average: 0.00, 0.00, 0.00

The first line tells you the current time, how long the machine has been up, how many users are logged in, and the short/medium/long-term compute load on the machine. If you run something for a long time, you’ll see these numbers go up. Right now, the machine is basically just sitting there, so these are all close to 0.

The second line:

Tasks: 239 total,   1 running, 238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used, 14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
1 root      39 19 0 0 0 S 0.0 0.0   246:57.22 kipmi0
2 root      RT   0     0    0    0 S 0.0 0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...

pbalign: maps PacBio reads to reference sequences and saves alignments to a BAM file

Jit — Thu, 24 May 2018 10:06:52 -0500

pbalign aligns PacBio reads to reference sequences, filters aligned reads according to user-specific filtering criteria, and converts the output to either the SAM format or PacBio Compare HDF5 (e.g., .cmp.h5) format. The output Compare HDF5 file will be compatible with Quiver if --forQuiver option is specified.

Address of the bookmark: https://github.com/PacificBiosciences/pbalign

Genomics and Personalized Medicine Breakthroughs

Sun, 01 Jun 2014 23:40:14 -0500

http://bit.ly/e8QGzY Human genome mapping is now enabling a breakthrough in medical innovation -- personalized medicine. What does this mean for patients? We can now identify predispositions to disease, predict how we metabolize drugs, and figure out what kinds of treatments we may respond to, and even determine when a drug may give us an adverse reaction. All medical specialties benefit from human genome intelligence -- oncology saw the first impacts -- but advances are now being seen in cardiology, obstetrics and gynecology, pediatric diseases, gastroenterology, rheumatology, immunology and other areas. This video covers the areas that genetic medicine is impacting and where the future of genomic medicine is heading.

Breakpointer: using local mapping artifacts to support sequence breakpoint discovery from single-end reads

Jit — Tue, 12 Jun 2018 12:41:10 -0500

Breakpointer is a fast tool for locating sequence breakpoints from the alignment of single end reads (SE) produced by next generation sequencing (NGS). It adopts a heuristic method in searching for local mapping signatures created by insertion/deletions (indels) or more complex structural variants(SVs).

Address of the bookmark: https://github.com/ruping/Breakpointer

Assistant Professor in Bioinformatics at Dr. D. Y. Patil Biotechnology & Bioinformatics Institute

Tue, 03 Jun 2014 19:54:15 -0500

Dr. D. Y. Patil Biotechnology & Bioinformatics Institute
Tathawade, Pune 411033.

Assistant Professor in Bioinformatics

Essential :
First Class Master’s Degree in the appropriate branch of Life Sciences / Technology (Tech.)
OR
Ph.D in Life Sciences or in the respective subject area of specialization
OR
Good Academic record with at least 55% marks (or an equivalent grade) at the Master’s Degree level, in the relevant subject or an equivalent degree from an Indian / Foreign University.
Besides fulfilling the above qualifications, candidates should have cleared the eligibility test (NET) for lecturers conducted by the UGC, CSIR or similar test accredited by the UGC and as per the requirements of UGC guidelines.

Desirable :
Teaching, research industrial and/or professional experience in a reputed organization.
Papers presented at Conferences and/or in refereed journals

Note : Application are invited in prescribed form Click here for Application Form
Kindly send your applications to “Registrar, Dr. D. Y. Patil Vidyapeeth, Pune, Sant Tukaram Nagar, Pimpri, Pune – 411018., Maharashtra, India.” should reach in the University office within 15 days from the publication.

More Info: http://www.dpu.edu.in/BiotechResearchPositions.aspx

NCBI Webinar

Jit — Sun, 08 Jun 2014 02:47:01 -0500

In less than two weeks, NCBI will offer a webinar entitled "Introducing 3 NCBI Resources to Navigate Testing for Disease Linked Variants: MedGen, GTR and ClinVar". This webinar will delve into the lifecycle of genetic testing and teach attendees how to navigate the NIH Genetic Testing Registry, ClinVar, and MedGen resources. These resources can be used to prepare for clinical cases, access detailed information about orderable genetic tests, interpret test results, and more.

More at https://attendee.gotowebinar.com/register/8452228815737989634

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler