BOL: Related items

How to install Perl modules on Mac OS X in easy steps !!

Jit — Thu, 20 Oct 2016 07:26:29 -0500

Today at work, I learned how to install Perl modules using CPAN. It’s a lot easier than I thought.

You see, for the past couple of years, I’ve been a bit frustrated because OS X does not come with a whole lot of Perl modules pre-installed, and for all I googled, I couldn’t find an “idiot’s” guide for moderately-savvy-but-not-expert users like myself to install modules and dependencies on demand.

The only instructions I could find point to Fink, which basically installs modules in a path that isn’t included in the Perl @INC variable, meaning you have to manually specify the full path to the modules in every script — which is not a lot of fun if you’re developing on OS X and deploying on Red Hat, for instance.

Moreover, Fink doesn’t seem to make every module available, and it’s not very easy to determine which Fink package you need to install if you need a particular module.

So, with a script that called on several apparently unavailable modules, and a deadline looming, I finally decided to suck it up and figure out how to use CPAN to install them:

1) Make sure you have the Apple Developer Tools (XCode) installed.

These are on one of your install discs, or available as a huge but free download from the Apple Developer Connection [free registration required] or the Mac App Store. I thought I had them, but apparently when we upgraded that computer to Tiger, they went missing.

If you don’t have this stuff installed, your installation will fail with errors about unavailable commands.

1.5) Install Command Line Tools (Recent XCode versions only)

(Thank you to Tom Marchioro for informing me about this step.)

Older versions of XCode installed the command line tools (which are required to properly install CPAN modules) by default, but apparently newer ones do not. To check whether you have the command line tools already installed, run the following from the Terminal:

$ which make

This command checks the system for the “make” tool. If it spits out something like /usr/bin/make you’re golden and can skip ahead to Step 2. If you just get a new prompt and no output, you’ll need to install the tools:

Launch XCode and bring up the Preferences panel.
Click on the Downloads tab
Click to install the Command Line Tools

If you like, you can run which make again to confirm that everything’s installed correctly.

2) Configure CPAN.

$ sudo perl -MCPAN -e shell

perl> o conf init

This will prompt you for some settings. You can accept the defaults for almost everything (just hit “return”). The two things you must fill in are the path to make (which should be /usr/bin/make or the value returned when you run which make from the command line) and your choice of CPAN mirrors (which you actually choose don’t really matter, but it won’t let you finish until you select at least one). If you use a proxy or a very restrictive firewall, you may have to configure those settings as well.

If you skip Step 2, you may get errors about make being unavailable.

3) Upgrade CPAN

$ sudo perl -MCPAN -e 'install Bundle::CPAN'

Don’t forget the sudo, or it’ll fail with permissions errors, probably when doing something relatively unimportant like installing man files.

This will spend a long time downloading, testing, and compiling various files and dependencies. Bear with it. It will prompt you a few times about dependencies. You probably want to enter “yes”. I agreed to everything it asked me, and everything turned out fine. YMMV of course. If everything installs properly, it’ll give you an “OK” at the end.

4) Install your modules. For each module….

$ sudo perl -MCPAN -e 'install Bundle::Name'

$ sudo perl -MCPAN -e 'install Module::Name'

This will install the module and its dependencies. Nice, eh? Again, don’t forget the sudo.

The first time you run this after upgrading CPAN, it may prompt you to configure again (see Step 2). If you accept its offer to try to configure itself automatically, it may just run through everything without a problem.

There are a couple of potential pitfalls with specific modules (such as theLWP::UserAgent / HEAD issue), but most have workarounds, and I haven’t run into anything that wasn’t easily recoverable.

And that’s it!

Did you find this useful? Is there anything I missed?

Mesquite: A modular system for evolutionary analysis

Rahul Nayak — Tue, 13 Mar 2018 06:54:32 -0500

Mesquite is modular, extendible software for evolutionary biology, designed to help biologists organize and analyze comparative data about organisms. Its emphasis is on phylogenetic analysis, but some of its modules concern population genetics, while others do non-phylogenetic multivariate analysis. Because it is modular, the analyses available depend on the modules installed.

https://github.com/MesquiteProject/MesquiteCore

Address of the bookmark: http://mesquiteproject.org/

PLINK2

Jit — Thu, 27 Oct 2016 11:24:45 -0500

This is a comprehensive update to Shaun Purcell's PLINK command-line program, developed by Christopher Chang with support from the NIH-NIDDK's Laboratory of Biological Modeling, the Purcell Lab at Mount Sinai School of Medicine, and others. (What's new?) (Credits.) (Methods paper.)

Address of the bookmark: https://www.cog-genomics.org/plink2/

snakepipes: A toolkit based on snakemake and python for analysis of NGS data

Jit — Thu, 30 May 2019 04:06:13 -0500

snakePipes are flexible and powerful workflows built using snakemake that simplify the analysis of NGS data.

DNA-mapping*
ChIP-seq*
RNA-seq*
ATAC-seq*
scRNA-seq
Hi-C
Whole Genome Bisulfite Seq/WGBS

(*Also available in "allele-specific" mode)

snakePipes can be installed via conda :

'conda install -c mpi-ie -c bioconda -c conda-forge snakePipes'.

Source code (https://github.com/maxplanck-ie/snakepipes) and documentation (https://snakepipes.readthedocs.io/en/latest/) are available online.

Address of the bookmark: https://github.com/maxplanck-ie/snakepipes

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis

Tue, 15 Nov 2016 17:15:48 -0600

National Institute Of Cancer Prevention & Research - ICMR

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis
Project entitled: “Next generation EGFR inhibitor identification using ligand based QSAR technique”

Essential: M.Sc. in Bioinformatics or related field. Desirable: Experience in QSAR and structure based drug designing.
Age: 28 years
No.of Post: 1

Pay Scale : Rs.27000

Application format is attached and should be sent by post to Dr. Subhash M Agarwal, Scientist D, Division of Bioinformatics, National Institute of Cancer Prevention & Research (ICMR), Plot No. I-7, Sector-39, Noida 201301 (U.P).

More at http://www.icmr.nic.in/icmrnews/NICPR_Advertisement%20for%20RA.pdf

Dahak: benchmarking and containerization of tools for analysis of complex non-clinical metagenomes.

BioStar — Thu, 09 Apr 2020 04:56:09 -0500

Dahak is a software suite that integrates state-of-the-art open source tools for metagenomic analyses. Tools in the dahak software suite will perform various steps in metagenomic analysis workflows including data pre-processing, metagenome assembly, taxonomic and functional classification, genome binning, and gene assignment. We aim to deliver the analytical framework as a robust and reliable containerized workflow system, which will be free from dependency, installation, and execution problems typically associated with other open-source bioinformatics solutions. This will maximize the transparency, data provenance (i.e., the process of tracing the origins of data and its movement through the workflow), and reproducibility.

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

DnaSP: DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms

Neel — Wed, 25 Nov 2020 19:51:38 -0600

DnaSP, DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms using data from a single locus (a multiple sequence aligned -MSA data), or from several loci (a Multiple-MSA data, such as formats generated by some assembler RAD-seq software). DnaSP can estimate several measures of DNA sequence variation within and between populations in noncoding, synonymous or nonsynonymous sites, or in various sorts of codon positions), as well as linkage disequilibrium, recombination, gene flow and gene conversion parameters.

Address of the bookmark: http://www.ub.edu/dnasp/

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Calculate the significance of the difference between two trends

BioStar — Tue, 14 Mar 2023 05:41:53 -0500

To calculate the significance of the difference between two trends, you can use a statistical test such as a t-test or ANOVA (analysis of variance). Here are the general steps to follow:

Define your null hypothesis (H0) and alternative hypothesis (H1). For example, H0 might be that there is no significant difference between the two trends, while H1 might be that there is a significant difference.
Collect data on the two trends. Make sure that the data is independent, normally distributed, and has equal variances.
Calculate the means and standard deviations of each trend.
Calculate the test statistic using a t-test or ANOVA. The test statistic will depend on the specific test you choose, but it will generally compare the difference in means between the two trends to the variability within each trend.
Determine the p-value associated with the test statistic. The p-value represents the probability of obtaining a test statistic as extreme as the one you calculated, assuming that the null hypothesis is true.
Compare the p-value to your chosen significance level (usually 0.05 or 0.01). If the p-value is less than or equal to the significance level, reject the null hypothesis and conclude that there is a significant difference between the two trends. If the p-value is greater than the significance level, fail to reject the null hypothesis and conclude that there is not enough evidence to support a significant difference.

It's important to note that the specific details of each step will depend on the type of test you choose and the software you use to perform the analysis.

The most common methods for comparing means include:

Methods	R function	Description
T-test	t.test()	Compare two groups (parametric)
Wilcoxon test	wilcox.test()	Compare two groups (non-parametric)
ANOVA	aov() or anova()	Compare multiple groups (parametric)
Kruskal-Wallis	kruskal.test()	Compare multiple groups (non-parametric)