BOL: Related items

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/

Science for Life Laboratory (SciLifeLab)-Sweden

Sat, 10 May 2014 06:22:30 -0500

Science for Life Laboratory (SciLifeLab) is a national center for molecular biosciences with focus on health and environmental research. The center combines frontline technical expertise with advanced knowledge of translational medicine and molecular bioscience. SciLifeLab is a national resource and a collaboration between four universities: Karolinska Institutet, KTH Royal Institute of Technology, Stockholm University and Uppsala University.

Webpage : https://www.scilifelab.se/about-us/
Opportunity: https://www.scilifelab.se/about-us/career/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

RA at IISR Kozhikode

Thu, 15 May 2014 10:08:09 -0500

INDIAN INSTITUTE OF SPICES RESEARCH
(Indian Council of Agricultural Research)
Marikunnu P.O., Kozhikode – 673 012, Kerala

Walk- in- Test cum Interview (based on test) for the selection of Research Associate

under the scheme “Distributed Information Sub Centre –DISC” & Research Assistant under scheme “Phytophthora, Fusarium and Ralstonia diseases of Horticultural and Field Crops” will be held at this Institute as per details indicated below.

WALK -IN- TEST CUM INTERVIEW

Name of the post : Research Associate

Date of Interview : 21-05-2014 at 10.00 AM

No. of posts : One

Qualifications : a)Essential

Ph.D Degree in Bioinformatics OR : Masters degree in Bioinformatics with a minimum of
60% marks or equivalent OGPA with at least two years research experience as evidenced from fellowship/ associateship/training/published papers etc.

b)Desirable: Experience in NGS data analysis.

Emoluments : Rs. 23,000/- per month + HRA (Masters Degree Holders)

Rs. 24,000/- per month + HRA (Ph.D Degree Holders)

Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)

Duration of Project : Till 31-03-2017.

Title of Assigment : Research Assistant (on contract basis)

No. of vacancy : One

Qualification : Essential : Post Graduation in Bioinformatics and Minimum one year experience in NGS data analysis

Desirable : Experience in Perl/Python/R

Remuneration : Rs. 20,000/- per month (consolidated)

Scope of work :

1. Analysis of different file formats and their conversions.

2. Assessing the quality of data and filtering of raw reads.
3. Assembling the raw reads-de novo as well as reference mapping.
4. Compression of aligned reads using Jam tools
5. RNA-seq. Analysis
6. Differential expression testing involving Normalization, Statistical testing, heat map generation & hierarchical clustering
7. Annotating the assembled genome and geneet testing and their validation
8. Metabolic pathway analysis
9. Comparative genomics
10. Setting up of genome browsers.

Period of Assigment : Initially for six months.

Date & Venue of Interview : 21-05-2014 at IISR, Kozhikode at 10.00 AM

More at http://www.spices.res.in/pdf/disc-advtmnt.pdf

AlignQC: A tool for assessing an alignment, and generating reports that are easy to share

Jit — Tue, 07 Aug 2018 04:41:07 -0500

Long read alignment analysis. Generate a reports on sequence alignments for mappability vs read sizes, error patterns, annotations and rarefraction curve analysis. The most basic analysis only requires a BAM file, and outputs a web browser compatible xhtml to visualize/share/store/extract analysis results.

https://f1000research.com/articles/6-100/

https://github.com/jason-weirather/AlignQC

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/AlignQC/

Professor/Associate Professor/ Assistant Professor at Chettinad Academy of Research and Education

Sat, 24 May 2014 00:00:15 -0500

OPEN FACULTY POSITION

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

The Minerva Research Group for Bioinformatics

Tue, 27 May 2014 15:48:14 -0500

The focus of the bioinformatics group is to use computational approaches to gain an insight into genome evolution in primates.

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Monitor running jobs on Linux server

Jitendra Narayan — Fri, 06 Jun 2014 16:18:43 -0500

You as a bioinformatican run lots of program on your servers. Sometime the shared server is also used by your colleague. If server is busy you sometime need to check the running programs and want to monitor the running programs as well. The "top" command will come in handy when you need to find out if things are still running, how long they’ve been running, or how much memory is being used.

‘top’ is very simple to run: type

%% top

You’ll get a screen that looks like this, and is updated regularly:

Simple, right? Heh.

First! Note that you can use ‘q’ or ‘CTRL-C’ to exit from ‘top’.

Now let’s read and understand at each line independently.

The first line:

top - 23:00:48 up 39 days, 2 user, load average: 0.00, 0.00, 0.00

The first line tells you the current time, how long the machine has been up, how many users are logged in, and the short/medium/long-term compute load on the machine. If you run something for a long time, you’ll see these numbers go up. Right now, the machine is basically just sitting there, so these are all close to 0.

The second line:

Tasks: 239 total,   1 running, 238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used, 14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
1 root      39 19 0 0 0 S 0.0 0.0   246:57.22 kipmi0
2 root      RT   0     0    0    0 S 0.0 0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...