BOL: Related items

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

Sat, 19 Jul 2014 14:59:30 -0500

Ministry of Science and Technology, Department of Science and Technology

7th ADVERTISEMENT – 2014 (2)

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

The Department of Science and Technology, Government of India, has launched the “Innovation in Science Pursuit for Inspired Research (INSPIRE)” [http://www.inspire-dst.gov.in] program in 2008.

The program aims to attract talent for study of science and careers with research. INSPIRE includes many components. The importance of Assured Career Opportunity in R&D sector has been recognized.

INSPIRE Faculty Scheme opens up an “Assured Opportunity for Research Career (AORC)” for young researchers in the age group of 27-32 years. It offers a contractual research awards to young achievers and opportunity for independent research in the near term and emerge as a future leader in the long term.

Eligibility

Essential Indian citizens and people of Indian origin including NRI/PIO status with PhD (in science, mathematics, engineering, pharmacy, medicine, and agriculture related subjects) from any recognized university in the world,

Those who have submitted their PhD Theses and are awaiting award of the degree are also
eligible. However, the award will be conveyed only after confirmation of the awarding the
PhD degree.

The upper age limit as on 1st July 2014 should be 32 years for considering support for a
period of 5 years. However, for SC and ST candidates, upper age limit will be 35 years.

Publication(s) in highly reputed Journals demonstrating research potential of the candidate.

Desirable

Candidates who are within top 1% at the School Leaving Examination, IIT-JEE rank, 1st Rank Holder either in graduation or post-graduation level university examination (which are used presently for identifying INSPIRE Scholars at under-graduate level and INSPIRE Fellows for doctoral degree)

More at http://www.inspire-dst.gov.in/faculty_scheme.html

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Postdoc position at Centre Méditerranéen de Médecine Moléculaire - Nice - France

Wed, 04 Jun 2014 07:20:57 -0500

The research group of Dr. Michele Trabucchi at the Centre Méditerranéen de Médecine Moléculaire (C3M) at INSERM U1065 (University of Nice Sophia-Antipolis, France) is seeking candidates for a Postdoctoral fellow position to start on October 2014 for 3 years funded by FRM (Fondation pour la Recherche Médicale).
The broad interest of the lab is in understanding the expression control and function of small RNAs in activated myeloid cells (visit our webpage to check research interests and publications of the group : http://www.unice.fr/c3m/EN/Equipe10.html ).

The work will focus on the functional studies of small RNAs by using next-generation sequencing approaches.

Candidates should hold a Ph.D. degree and have strong background in bioinformatics.
The University of Nice Sophia-Antipolis provides a wide range of facilities and training essential for biomedical research.

Interested applicants should send a PDF with a cover letter stating research interests and qualifications, an updated CV, a summary of previous research experience and contact information for two references to Michele Trabucchi ( mtrabucchi@unice.fr )

Homepage: http://www.unice.fr/c3m/EN/Equipe10.html

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

Ten recommendations for creating usable bioinformatics command line software

RAJESH DETROJA — Sun, 08 Jun 2014 10:06:26 -0500

Bioinformatics software varies greatly in quality. In terms of usability, the command line interface is the first experience a user will have of a tool. Unfortunately, this is often also the last time a tool will be used. Here I present ten recommendations for command line software author’s tools to follow, which I believe would greatly improve the uptake and usability of their products, waste less user’s time, and improve the quality of scientific analyses.

Address of the bookmark: http://www.gigasciencejournal.com/content/2/1/15?utm_content=buffer25ee0&utm_medium=social&utm_source=twitter.com&utm_campaign=buffer

SqueezeMeta: a fully automated metagenomics pipeline, from reads to bins

BioStar — Mon, 17 Aug 2020 05:25:10 -0500

SqueezeMeta is a full automatic pipeline for metagenomics/metatranscriptomics, covering all steps of the analysis. SqueezeMeta includes multi-metagenome support allowing the co-assembly of related metagenomes and the retrieval of individual genomes via binning procedures. Thus, SqueezeMeta features several unique characteristics:

Co-assembly procedure with read mapping for estimation of the abundances of genes in each metagenome
Co-assembly of a large number of metagenomes via merging of individual metagenomes
Includes binning and bin checking, for retrieving individual genomes
The results are stored in a database, where they can be easily exported and shared, and can be inspected anywhere using a web interface.
Internal checks for the assembly and binning steps inform about the consistency of contigs and bins, allowing to spot potential chimeras.
Metatranscriptomic support via mapping of cDNA reads against reference metagenomes

Address of the bookmark: https://github.com/jtamames/SqueezeMeta

Bioinformatics algorithms tutorials

John Parker — Tue, 24 Jun 2014 00:10:45 -0500

Useful bioinformatics tutorial, such as

De Bruijn Graphs for NGS Assembly
Algorithms for PacBio Reads
Software and Hardware Concepts for Bioinformatics
Finding us in Homolog.us (Search Algorithms)
NGS Genome and RNAseq Assembly - a Hands on Primer
Introduction to PERL, Python, R and C/C++ for Bioinformatics

Address of the bookmark: http://www.homolog.us/Tutorials/

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

Workshop On Molecular Modeling and Dynamics Simulation Analyses

Fri, 04 Jul 2014 13:38:13 -0500

Workshop On Molecular Modeling and Dynamics Simulation Analyses

August1-2, 2014

Organised By

Centre of Excellence in Bioinformatics
Bioinformatics Infrastructure Facility
Department of Biochemistry
University of Lucknow
Lucknow-226007

Course Contents

Molecular Modeling
Homology Modeling
Molecular Docking
Post-structural Analyses

Molecular Dynamics (MD)
Simulation
Linux Introduction
Gromacs Installation

MD Simulation of Protein ligand complex
Analyses of MD
Trajectories
Visualization of Dynamic
complexes

Important Dates

Registration Begins June 25, 2014
Registration Closes July 25, 2014

Brochure : www.lkouniv.ac.in/conference/Brochure_August,%202014.pdf

Steps to find palindrome in genomes !

BioStar — Thu, 09 Mar 2023 02:56:54 -0600

Palindromes are sequences of nucleotides that read the same backward as forward. They can be present in genomes and have various biological functions. Here are some methods for discovering palindromes in genomes:

Direct sequence search: One of the simplest ways to discover palindromes is to search the genome sequence directly for palindromic sequences using pattern matching tools, such as regular expressions or string algorithms. This approach can be useful for discovering simple palindromes, but may miss more complex palindromic structures.
Dot plot analysis: Dot plot analysis is a graphical method that can be used to identify palindromic regions in a genome. It involves plotting the genome sequence against itself and examining the diagonal patterns that emerge. Palindromic regions will appear as symmetrical patterns along the diagonal.
Restriction enzyme analysis: Some restriction enzymes, such as EcoRI and HindIII, recognize palindromic sequences and cleave DNA at these sites. By digesting the genome with these enzymes and examining the resulting fragments, palindromic regions can be identified.
Next-generation sequencing: High-throughput sequencing technologies, such as PacBio and Oxford Nanopore, can generate long reads that can span entire palindromic regions. By mapping these reads to the genome, palindromic regions can be identified and characterized.
Comparative genomics: Comparing the genomes of related species can also reveal palindromic regions that are conserved across evolutionarily divergent lineages. This approach can help identify functional palindromes that are under selective pressure.

Overall, the discovery of palindromic sequences in genomes can be accomplished using a variety of methods, each with their own advantages and limitations. A combination of these methods can provide a comprehensive understanding of the palindromic landscape of a genome.