BOL: Related items

poRe: an R package for the visualization and analysis of nanopore sequencing data

Jit — Thu, 23 Nov 2017 09:55:57 -0600

Motivation: The Oxford Nanopore MinION device represents a unique sequencing technology. As a mobile sequencing device powered by the USB port of a laptop, the MinION has huge potential applications. To enable these applications, the bioinformatics community will need to design and build a suite of tools specifically for MinION data.

Results: Here we present poRe, a package for R that enables users to manipulate, organize, summarize and visualize MinION nanopore sequencing data. As a package for R, poRe has been tested on Windows, Linux and MacOSX. Crucially, the Windows version allows users to analyse MinION data on the Windows laptop attached to the device.

Availability and implementation: poRe is released as a package for R at http://sourceforge.net/projects/rpore/ . A tutorial and further information are available at https://sourceforge.net/p/rpore/wiki/Home/

Contact:mick.watson@roslin.ed.ac.uk

Address of the bookmark: https://academic.oup.com/bioinformatics/article/31/1/114/2365693

PGAP-X: Extension on pan-genome analysis pipeline

Rahul Nayak — Tue, 23 Jan 2018 11:41:43 -0600

PGAP-X is a microbial comparative genomic analysis platform with graphic interface. Serials of algorithms and methodologies have been developed and integrated to analyze and visualize genomics structure variation, gene distribution with different conservative levels, and genetic variation from pan-genome sight. At the same time, analytical result data from many other programs, including genome alignment result and orthologs clusters, are also supported to be further analyzed or visualized in PGAP-X. The workflow and feature snapshot in PGAP-X were shown as Fig.1 and Fig.2.

Address of the bookmark: https://pgapx.ybzhao.com/

How to install Perl modules on Mac OS X in easy steps !!

Jit — Thu, 20 Oct 2016 07:26:29 -0500

Today at work, I learned how to install Perl modules using CPAN. It’s a lot easier than I thought.

You see, for the past couple of years, I’ve been a bit frustrated because OS X does not come with a whole lot of Perl modules pre-installed, and for all I googled, I couldn’t find an “idiot’s” guide for moderately-savvy-but-not-expert users like myself to install modules and dependencies on demand.

The only instructions I could find point to Fink, which basically installs modules in a path that isn’t included in the Perl @INC variable, meaning you have to manually specify the full path to the modules in every script — which is not a lot of fun if you’re developing on OS X and deploying on Red Hat, for instance.

Moreover, Fink doesn’t seem to make every module available, and it’s not very easy to determine which Fink package you need to install if you need a particular module.

So, with a script that called on several apparently unavailable modules, and a deadline looming, I finally decided to suck it up and figure out how to use CPAN to install them:

1) Make sure you have the Apple Developer Tools (XCode) installed.

These are on one of your install discs, or available as a huge but free download from the Apple Developer Connection [free registration required] or the Mac App Store. I thought I had them, but apparently when we upgraded that computer to Tiger, they went missing.

If you don’t have this stuff installed, your installation will fail with errors about unavailable commands.

1.5) Install Command Line Tools (Recent XCode versions only)

(Thank you to Tom Marchioro for informing me about this step.)

Older versions of XCode installed the command line tools (which are required to properly install CPAN modules) by default, but apparently newer ones do not. To check whether you have the command line tools already installed, run the following from the Terminal:

$ which make

This command checks the system for the “make” tool. If it spits out something like /usr/bin/make you’re golden and can skip ahead to Step 2. If you just get a new prompt and no output, you’ll need to install the tools:

Launch XCode and bring up the Preferences panel.
Click on the Downloads tab
Click to install the Command Line Tools

If you like, you can run which make again to confirm that everything’s installed correctly.

2) Configure CPAN.

$ sudo perl -MCPAN -e shell

perl> o conf init

This will prompt you for some settings. You can accept the defaults for almost everything (just hit “return”). The two things you must fill in are the path to make (which should be /usr/bin/make or the value returned when you run which make from the command line) and your choice of CPAN mirrors (which you actually choose don’t really matter, but it won’t let you finish until you select at least one). If you use a proxy or a very restrictive firewall, you may have to configure those settings as well.

If you skip Step 2, you may get errors about make being unavailable.

3) Upgrade CPAN

$ sudo perl -MCPAN -e 'install Bundle::CPAN'

Don’t forget the sudo, or it’ll fail with permissions errors, probably when doing something relatively unimportant like installing man files.

This will spend a long time downloading, testing, and compiling various files and dependencies. Bear with it. It will prompt you a few times about dependencies. You probably want to enter “yes”. I agreed to everything it asked me, and everything turned out fine. YMMV of course. If everything installs properly, it’ll give you an “OK” at the end.

4) Install your modules. For each module….

$ sudo perl -MCPAN -e 'install Bundle::Name'

$ sudo perl -MCPAN -e 'install Module::Name'

This will install the module and its dependencies. Nice, eh? Again, don’t forget the sudo.

The first time you run this after upgrading CPAN, it may prompt you to configure again (see Step 2). If you accept its offer to try to configure itself automatically, it may just run through everything without a problem.

There are a couple of potential pitfalls with specific modules (such as theLWP::UserAgent / HEAD issue), but most have workarounds, and I haven’t run into anything that wasn’t easily recoverable.

And that’s it!

Did you find this useful? Is there anything I missed?

bpRNA: large-scale automated annotation and analysis of RNA secondary structure

Rahul Nayak — Wed, 23 May 2018 03:24:33 -0500

bpRNA, a novel annotation tool capable of parsing RNA structures, including complex pseudoknot-containing RNAs, to yield an objective, precise, compact, unambiguous, easily-interpretable description of all loops, stems, and pseudoknots, along with the positions, sequence, and flanking base pairs of each such structural feature.

The bpRNA code is written in perl and requires the Graph perl module. Several additional scripts for analysis are included. The source code is available at http://github.com/hendrixlab/bpRNA.

Address of the bookmark: http://github.com/hendrixlab/bpRNA

PLINK2

Jit — Thu, 27 Oct 2016 11:24:45 -0500

This is a comprehensive update to Shaun Purcell's PLINK command-line program, developed by Christopher Chang with support from the NIH-NIDDK's Laboratory of Biological Modeling, the Purcell Lab at Mount Sinai School of Medicine, and others. (What's new?) (Credits.) (Methods paper.)

Address of the bookmark: https://www.cog-genomics.org/plink2/

Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees

Rahul Nayak — Wed, 27 Nov 2019 05:32:33 -0600

The Environment for Tree Exploration (ETE) is a Python programming toolkit that assists in the recontruction, manipulation, analysis and visualization of phylogenetic trees (although clustering trees or any other tree-like data structure are also supported).

Other tools

https://github.com/shenwei356/taxonkit

ETE, version: 3.1.1
BioPython, version: 1.73
taxadb, version: 0.10.1
TaxonKit, version: 0.5.0

Address of the bookmark: https://pypi.org/project/ete3/3.1.1/

netGO: R-Shiny package for network-integrated pathway enrichment analysis

Jit — Wed, 12 Feb 2020 12:40:54 -0600

netGO is an R/Shiny package for network-integrated pathway enrichment analysis.
netGO provides user-interactive visualization of enrichment analysis results and related networks.

Currently, netGO supports analysis for four species (Human, Mouse, Arabidopsis thaliana,and Yeast)
These data are available from netGO-Data repository.

https://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btaa077/5728635

Address of the bookmark: https://github.com/unistbig/netGO

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis

Tue, 15 Nov 2016 17:15:48 -0600

National Institute Of Cancer Prevention & Research - ICMR

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis
Project entitled: “Next generation EGFR inhibitor identification using ligand based QSAR technique”

Essential: M.Sc. in Bioinformatics or related field. Desirable: Experience in QSAR and structure based drug designing.
Age: 28 years
No.of Post: 1

Pay Scale : Rs.27000

Application format is attached and should be sent by post to Dr. Subhash M Agarwal, Scientist D, Division of Bioinformatics, National Institute of Cancer Prevention & Research (ICMR), Plot No. I-7, Sector-39, Noida 201301 (U.P).

More at http://www.icmr.nic.in/icmrnews/NICPR_Advertisement%20for%20RA.pdf

Breedbase is a comprehensive breeding management and analysis software

BioStar — Wed, 06 Jan 2021 19:45:21 -0600

Breedbase is a comprehensive breeding management and analysis software. It can be used to design field layouts, collect phenotypic information using tablets, support the collection of genotyping samples in a field, store large amounts of high density genotypic information, and provide Genomic Selection related analyses and predictions. Breedbase supports the BrAPI standard.

Address of the bookmark: https://breedbase.org/

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/