BOL: Related items

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis

Tue, 15 Nov 2016 17:15:48 -0600

National Institute Of Cancer Prevention & Research - ICMR

Research Assistant Bioinformatics recruitment in National Institute Of Cancer Prevention & Research (ICMR) on Contract basis
Project entitled: “Next generation EGFR inhibitor identification using ligand based QSAR technique”

Essential: M.Sc. in Bioinformatics or related field. Desirable: Experience in QSAR and structure based drug designing.
Age: 28 years
No.of Post: 1

Pay Scale : Rs.27000

Application format is attached and should be sent by post to Dr. Subhash M Agarwal, Scientist D, Division of Bioinformatics, National Institute of Cancer Prevention & Research (ICMR), Plot No. I-7, Sector-39, Noida 201301 (U.P).

More at http://www.icmr.nic.in/icmrnews/NICPR_Advertisement%20for%20RA.pdf

Dahak: benchmarking and containerization of tools for analysis of complex non-clinical metagenomes.

BioStar — Thu, 09 Apr 2020 04:56:09 -0500

Dahak is a software suite that integrates state-of-the-art open source tools for metagenomic analyses. Tools in the dahak software suite will perform various steps in metagenomic analysis workflows including data pre-processing, metagenome assembly, taxonomic and functional classification, genome binning, and gene assignment. We aim to deliver the analytical framework as a robust and reliable containerized workflow system, which will be free from dependency, installation, and execution problems typically associated with other open-source bioinformatics solutions. This will maximize the transparency, data provenance (i.e., the process of tracing the origins of data and its movement through the workflow), and reproducibility.

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

DnaSP: DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms

Neel — Wed, 25 Nov 2020 19:51:38 -0600

DnaSP, DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms using data from a single locus (a multiple sequence aligned -MSA data), or from several loci (a Multiple-MSA data, such as formats generated by some assembler RAD-seq software). DnaSP can estimate several measures of DNA sequence variation within and between populations in noncoding, synonymous or nonsynonymous sites, or in various sorts of codon positions), as well as linkage disequilibrium, recombination, gene flow and gene conversion parameters.

Address of the bookmark: http://www.ub.edu/dnasp/

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Calculate the significance of the difference between two trends

BioStar — Tue, 14 Mar 2023 05:41:53 -0500

To calculate the significance of the difference between two trends, you can use a statistical test such as a t-test or ANOVA (analysis of variance). Here are the general steps to follow:

Define your null hypothesis (H0) and alternative hypothesis (H1). For example, H0 might be that there is no significant difference between the two trends, while H1 might be that there is a significant difference.
Collect data on the two trends. Make sure that the data is independent, normally distributed, and has equal variances.
Calculate the means and standard deviations of each trend.
Calculate the test statistic using a t-test or ANOVA. The test statistic will depend on the specific test you choose, but it will generally compare the difference in means between the two trends to the variability within each trend.
Determine the p-value associated with the test statistic. The p-value represents the probability of obtaining a test statistic as extreme as the one you calculated, assuming that the null hypothesis is true.
Compare the p-value to your chosen significance level (usually 0.05 or 0.01). If the p-value is less than or equal to the significance level, reject the null hypothesis and conclude that there is a significant difference between the two trends. If the p-value is greater than the significance level, fail to reject the null hypothesis and conclude that there is not enough evidence to support a significant difference.

It's important to note that the specific details of each step will depend on the type of test you choose and the software you use to perform the analysis.

The most common methods for comparing means include:

Methods	R function	Description
T-test	t.test()	Compare two groups (parametric)
Wilcoxon test	wilcox.test()	Compare two groups (non-parametric)
ANOVA	aov() or anova()	Compare multiple groups (parametric)
Kruskal-Wallis	kruskal.test()	Compare multiple groups (non-parametric)

Finding Patterns in Biological Sequences

Jit — Thu, 22 Dec 2016 10:30:49 -0600

In this report we provide an overview of known techniques for discovery of patterns of biological sequences (DNA and proteins). We also provide biological motivation, and methods of biological verification of such patterns. Finally we list publicly available tools and databases for pattern discovery. On-line supplement is available through http://genetics.uwaterloo.ca/∼tvinar/cs798g/motif.

Address of the bookmark: http://engr.case.edu/li_jing/papers/00798gpattern.pdf

ONT assembly and Illumina polishing pipeline

Jit — Thu, 23 Nov 2017 10:13:42 -0600

This pipeline performs the following steps:

Assembly of nanopore reads using Canu.
Polish canu contigs using racon (optional).
Map a paired-end Illumina dataset onto the contigs obtained in the previous steps using BWA mem.
Perform correction of contigs using pilon and the Illumina dataset.

Address of the bookmark: https://github.com/nanoporetech/ont-assembly-polish

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

dnaPipeTE: de-novo assembly & annotation Pipeline for Transposable Elements

Rahul Nayak — Sat, 02 Dec 2017 18:25:44 -0600

dnaPipeTE (for de-novo assembly & annotation Pipeline for Transposable Elements), is a pipeline designed to find, annotate and quantify Transposable Elements in small samples of NGS datasets. It is very useful to quantify the proportion of TEs in newly sequenced genomes since it does not require genome assembly and works on small datasets (< 1X).

dnaPipeTE is developped by Clément Goubert, Laurent Modolo and the TREEP team of the LBBE: http://lbbe.univ-lyon1.fr/-Equipe-Elements-transposables-.html?lang=en
You can find the original publication in GBE here: https://academic.oup.com/gbe/article/7/4/1192/533768

output examples of quantification and TE landscape (relative age) produced by dnaPipeTE

Address of the bookmark: https://github.com/clemgoub/dnaPipeTE