That is the problem ViralQC (https://github.com/ChengPENG-wolf/ViralQC) aims to solve.

Viral sequences recovered from metagenomic data can be incomplete or contaminated with microbial DNA. ViralQC uses information from both DNA sequences and predicted proteins to detect contamination and estimate how complete a viral contig is.

The authors compared ViralQC with CheckV and found that ViralQC performed particularly well for longer viral contigs, improving contamination detection and completeness estimation in several test cases.

Why does this matter? Because discovering a viral sequence is only the first step. If the sequence is contaminated or incomplete, downstream analyses—such as identifying viral functions or studying evolution—can be misleading.

ViralQC provides a useful quality check before researchers trust the viral genome they have discovered.

In a world where metagenomics is uncovering enormous numbers of unknown viruses, tools like ViralQC help us separate the real viral story from an incomplete or mixed-up one.

More at https://academic.oup.com/bioinformatics/article/42/Supplement_2/btag463/8767288

Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoFinder is also designed to find and annotate mitochondrial sequences in existing genomic assemblies (generated from Hifi/PacBio/Nanopore/Illumina sequencing data...)

MitoFinder is distributed under the license.

Address of the bookmark: https://github.com/RemiAllio/MitoFinder

The Program first constructs all exact match pairs by a suffix-array based algorithm and extends them to long highly similar pairs. Then Smith-Waterman algorithm is used to adjust the ends of LTR pair candidates to get alignment boundaries. These boundaries are subject to re-adjustment using supporting information of TG..CA box and TSRs and reliable LTRs are selected. Next, LTR_FINDER tries to identify PBS, PPT and RT inside LTR pairs by build-in aligning and counting modules. RT identification includes a dynamic programming to process frame shift. For other protein domains, LTR_FINDER calls ps_scan (from PROSITE, http://www.expasy.org/prosite/) to locate cores of important enzymes if they occur.

Address of the bookmark: https://github.com/xzhub/LTR_Finder

In comparative genome analysis work, we usually compare more than two genomes and looks for syntenic regions amongst them. In my research I used Evolution Highway (RH) http://eh-demo.ncsa.uiuc.edu/, which is a collaborative project designed to provide a visual means for simultaneously comparing genomes of multiple amniote species. The tool removes the burden of manually aligning these maps and allows cognitive skills to be used toward something more valuable than preparation and transformation of data. In addition to EH, attractive Circos (http://circos.ca/) is also very popular for this kind of analysis.

The EH is available online, and can be easily access and use, whereas Circos installation is not entirely straightforward. One of the most difficult parts of the installation involves installing the GD library. Since there weren't good instructions for installing this library on the internet I decided to post instructions here in case they are useful to anyone else.

Following are the steps to install GD modules in Mac OS

1. Setup

Create a folder for the files:

$ mkdir -p /SourceCache
$ cd /SourceCache

Get and unpack the required Jpeg-6b and GD libraries:
Download Jpeg-6b (http://code.google.com/p/google-desktop-for-linux-mirror/downloads/detail?name=jpeg-6b.tar.gz&can=2&q)
Download GD (http://search.cpan.org/~lds/GD-2.46/)

Place the "tar.gz" files in "/SourceCache" and double click to unpack.

2. Install libjpeg

Copy the "config.sub" and "config.guess" files to "/SourceCache". Note that your "config.sub" and ""config.guess" files may be in a slightly different location. The commands below show where they were on my machine:

$ cd /SourceCache/jpeg-6b/src
$ cp /usr/share/libtool/config/config.sub .
$ cp /usr/share/libtool/config/config.guess .

Configure libjpeg as follows. Note that this was installed on a 64 bit machine. However, this method may configure it in a 32 bit format. This may not be the best way to configure the installation but it works.

$ .configure --enable-shared
$ make

Check to see if the following directories exist on your machine. Create the missing directories in the following manner:

$ mkdir -p /usr/local/include
$ mkdir -p /usr/local/bin
$ mkdir -p /usr/local/lib
$ mkdir -p /usr/local/man/man1

Finish making and installing libjpeg:

$ make install

3. Install GD

$ cd /SourceCache/GD-2.46/GD/
$ perl Makefile.PL
$ make
$ make test (optional)
$ make html (optional)
$ make install

Other way for Mac OS
The easiest way to get a lot of these is with a program called Fink, which is similar in nature to the CPAN installer, but installs common GNU utilities. Fink is available from <http://sourceforge.net/projects/fink/>.

Follow the instructions for setting up Fink. Once it's installed, you'll want to run the following as root: fink install gd

It will prompt you for a number of dependencies, type 'y' and hit enter to install all of the dependencies. Then watch it work.

To prevent creating conflicts with the software that Apple installs by default, Fink creates its own directory tree at /sw where it installs most of the software that it installs. This means your libraries and headers for libgd will be at /sw/lib and /sw/include instead of /usr/lib and /usr/local/include. Because of these changed locations for the libraries, the Perl GD module will not install directly via CPAN, because it looks for the specific paths instead of getting them from your environment. But there's a way around that :-)

Instead of typing "install GD" at the cpan> prompt, type look GD. This should go through the motions of downloading the latest version of the GD module, then it will open a shell and drop you into the build directory. Apply below patch to the Makefile.PL file (save the patch into a file and use the command patch < patchfile.)

Then, run these commands to finish the installation of the GD module:

perl Makefile.PL
make
make test
make install
And don't forget to run exit to get back to CPAN.

Install on MS Window, using PPM

C:\Documents and Settings\Owner>ppm
PPM interactive shell (2.2.0) - type 'help' for available commands.
PPM> install GD
Install package 'GD?' (y/N): y
Installing package 'GD'...
Downloading http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW. ...
Installing C:\Perl\site\lib\auto\GD\GD.bs
Installing C:\Perl\site\lib\auto\GD\GD.dll
Installing C:\Perl\site\lib\auto\GD\GD.exp
Installing C:\Perl\site\lib\auto\GD\GD.lib
Installing C:\Perl\html\site\lib\GD.html
Installing C:\Perl\site\lib\GD.pm
Installing C:\Perl\site\lib\qd.pl
Installing C:\Perl\site\lib\auto\GD\autosplit.ix
PPM>


If you can't install it from ppm. You can download it:
http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.


BTW,All Perl 5.6.1 Modules are located at:

http://ppm.ActiveState.com/PPMPackages/5.6plus/MSW.

Install the Perl GD Module on Linux

$ sudo perl -MCPAN -e shell

Since it was the first time I had run this command on this particular machine I had to answer a lot of questions but simply selected the defaults for everything as this usually works for me. Once in the CPAN shell I entered

$ install Bundle::CPAN

and selected all of the defaults again. Once the CPAN bundle had finished installing I tried to install GD::Graph by typing

$ install GD::Graph

but it failed with hundreds of errors – the first of which was

GD.xs:7:16: error: gd.h: No such file or directory

This was fixed with the following apt-get command (in the bash shell)

$ sudo apt-get install libgd2-xpm-dev

back in the CPAN shell I still couldn’t get GD::Graph to build and I guessed this was because of some left over files from the failed build. I don’t know the command to clean things up inside the CPAN shell and am too lazy to read the docs so I simply went into the .cpan/build directory in my home directory and deleted anything that started with GD – eg

$ rm -rf GD-2.35-HC_vkB

$ rm -rf GDGraph-1.44-Evfibe

and so on. Those strings at the end (VkB and so on) look random so they might be different on your machine. Then I went back into the CPAN shell and ran

$ install GD::Graph

There were a few dependencies which the script fetched and installed for me but everything worked smoothly.

Manual and other Perl Module instalation are mentioned in my previous blog @ http://bioinformaticsonline.com/blog/view/710/how-to-install-perl-modules-manually-using-cpan-command-and-other-quick-ways

Address of the bookmark: http://www.citrusperl.com/

Address of the bookmark: http://cbb.sjtu.edu.cn/course/database/beginning.pdf

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

#Find all occurrences of a pattern in a string.
#Given: Strings Pattern and Genome.
#Return: All starting positions in Genome where Pattern appears as a substring. Use 0-based indexing.

use strict;
use warnings;

my $string="GATATATGCATATACTT";
my $subStr="ATAT";
my $kmer=length($subStr);

kmerMatch ($string, $subStr, $kmer);

sub kmerMatch { #Check the exact matching kmers with sliding window
my ($string, $myStr, $kmer)=@_;
for (my $aa=0; $aa<=(length($string)-$kmer); $aa++) {
    my $myWin=substr  $string, $aa,$kmer;
    if ($myWin eq $myStr) {
        #print "$myWin eq $myStr\n";
        print $aa;
    }
}
}

The next-generation sequencing included whole genome sequencing(WGS), transcriptome sequencing (whole cDNA sequencing, RNA-seq), digital gene expression sequencing (Tag-Seq), ChIP-Seq, and so on. And there are many sequencing platform to generate sequece, as well know Sanger/ABi(the frist generation), Solexa/illumina, SOLiD/ABi, 454/Roche. But thier sequence format is different, also they have different error type. High quality data is very important for further analysis or data mining. There are many pipeline for raw sequence quality analysis and control with few of process for reporting reads quality statistical details, trimming, filtering, and error correction. Please bookmarks them for the benefits of bioinformatics community.

https://code.google.com/p/biowiki/

https://code.google.com/p/ngs-pipeline/source/browse/#svn%2Ftrunk

NGSand Perl scripts https://code.google.com/hosting/search?q=NGS+perl&projectsearch=Search+projects

NGS and Python scripts https://code.google.com/hosting/search?q=NGS+Python&projectsearch=Search+projects

Address of the bookmark: https://code.google.com/hosting/search?q=bioinformatics&sa=Search