BOL: Related items

FSA: Fast Statistical Alignment

Jit — Mon, 06 Feb 2017 04:26:01 -0600

FSA is a probabilistic multiple sequence alignment algorithm which uses a "distance-based" approach to aligning homologous protein, RNA or DNA sequences. Much as distance-based phylogenetic reconstruction methods like Neighbor-Joining build a phylogeny using only pairwise divergence estimates, FSA builds a multiple alignment using only pairwise estimations of homology. This is made possible by the sequence annealing technique for constructing a multiple alignment from pairwise comparisons, developed by Ariel Schwartz in "Posterior Decoding Methods for Optimization and Control of Multiple Alignments."

FSA brings the high accuracies previously available only for small-scale analyses of proteins or RNAs to large-scale problems such as aligning thousands of sequences or megabase-long sequences. FSA introduces several novel methods for constructing better alignments:

FSA uses machine-learning techniques to estimate gap and substitution parameters on the fly for each set of input sequences. This "query-specific learning" alignment method makes FSA very robust: it can produce superior alignments of sets of homologous sequences which are subject to very different evolutionary constraints.
FSA is capable of aligning hundreds or even thousands of sequences using a randomized inference algorithm to reduce the computational cost of multiple alignment. This randomized inference can be over ten times faster than a direct approach with little loss of accuracy.
FSA can quickly align very long sequences using the "anchor annealing" technique for resolving anchors and projecting them with transitive anchoring. It then stitches together the alignment between the anchors using the methods described above.
The included GUI, MAD (Multiple Alignment Display), can display the intermediate alignments produced by FSA, where each character is colored according to the probability that it is correctly aligned (see the picture and movie at the top of the page).

You can see more information on the FAQ.

Address of the bookmark: http://fsa.sourceforge.net/

GenomeComp

Jit — Fri, 17 Feb 2017 08:38:32 -0600

GenomeComp is a tool for summarizing, parsing and visualizing the genome wide sequence comparison results derived from voluminous BLAST textual output, so as to locate the rearrangements, insertions or deletions of genome segments between species or strains.

It can be easily used to compare, parsing and visualize large genomic sequences, especially closely related genomes such as inter-species or inter-strains. In addition, it can also show other sequence features like repeat sequence distributions in one whole-genome DNA sequence by comparing the genome to itself.

It is a stand-alone graphical user interface (GUI) program which runs on Linux, Unix, Mac OS X (tested on version 10.2.4 only) and Microsoft Windows platforms and is written in Perl/Tk.

Address of the bookmark: http://www.mgc.ac.cn/GenomeComp/

splitbam: splits a BAM by chromosomes

Jit — Tue, 28 Feb 2017 09:01:28 -0600

splitbam splits a BAM by chromosomes.

Using the reference sequence dictionary (*.dict), it also creates some empty BAM files if no sam record was found for a chromosome. A pair of 'mock' SAM-Records can also be added to those empty BAMs to avoid some tools (like samtools) to crash.

Usage

java -jar splitbam.jar -p OUT/__CHROM__/__CHROM__.bam -R ref.fasta (bam|sam|stdin)

Options

-h help; This screen.
-R (indexed reference file) REQUIRED.
-u (unmapped chromosome name): default:Unmapped
-e | --empty : generate EMPTY bams for chromosome having no read mapped
-m | --mock : if option '-e', add a mock pair of sam records to the empty bam
-p (output file/bam pattern) REQUIRED. MUST contain __CHROM__ and end with .bam
-s assume input is sorted.
-x | --index create index.
-t | --tmp (dir) tmp file directory
-G (file) chrom-group file (see below)

Address of the bookmark: https://code.google.com/archive/p/jvarkit/wikis/SplitBam.wiki

Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome

BioStar — Wed, 22 Jul 2020 10:11:13 -0500

We have developed the Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome. We envisage its use during annotation jamborees, genome comparison and for use by developers for rapid feedback during annotation software development and testing. SOBA also provides annotation consistency feedback to ensure correct use of terminology within annotations, and guides users to add new terms to the Sequence Ontology when required. SOBA is available at http://www.sequenceontology.org/cgi-bin/soba.cgi.

More at https://pubmed.ncbi.nlm.nih.gov/20494974/

Address of the bookmark: http://www.sequenceontology.org/cgi-bin/soba.cgi

Dynamic chromosome breakpoints !!!

Jitendra Narayan — Wed, 13 Aug 2014 18:38:10 -0500

Cell division involves the distribution of identical genetic material, DNA, to two daughters’ cells. During this process, duplicated deoxyribonucleic acid (DNA) goes through a condensation and decondensation process. This is followed by nuclear envelope dissolution, mitotic spindle assembly, migration of the sister chromatid pairs to the metaphase plate, division and segregation of identical sets of chromosomes into daughter nuclei and nuclear envelope reformation.

The vital metaphase stage of cell division, when the sister chromatids migrated to the centre and lined up in a row, and pulled apart using attached microtubules in such a way that half the DNA ends up in each daughter cell. However, before the mitotic spindle‐mediated movement gets start and pulled DNA apart, the chromosomes are free to undergo recombination which involves the exchange of genetic material either between multiple chromosomes or between different regions of the same chromosome.

During recombination, the precise breakage of each strand, exchange between the strands, and sealing of the resulting recombined molecules happens. The “chromosomal breakpoints” refers to these places where they break. Mostly, this process occurs with a high degree of accuracy at high frequency in both eukaryotic and prokaryotic cells. But occasionally this “break and sealing/ break and reattach” process goes wrong and the reattachment happens in the wrong place which usually create disaster (with few exceptions).These chromosome disaster or abnormalities involve the gain, loss or rearrangement of visible amounts of genetic material during cell division. These abnormalities are of two type, the first one is numerical abnormalities where severe disorders are caused by the loss or gain of whole chromosomes, which affect the copy number of hundreds or even thousands of genes. The second are structural abnormalities which can be unbalanced or balanced. The former are similar to numerical abnormalities in that genetic material is either gained or lost. The natural defects in chromosome segregation are linked to cancer and several genetic diseases (http://en.wikipedia.org/wiki/List_of_genetic_disorders). Therefore, the enzymes involved in regulating cell division are still the attractive drug targets for many diseases.

Apart from certain chromosome abnormalities, these “crossing over” of segments of maternal and paternal chromosomes to form hybrid chromosomes have some evolutionary importance and considered as a driver of genetic variation. Moreover, the chromosome breakage in evolution is considered to be non-random in nature(http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.0020014). In addition the study of breakpoint regions and non-breakpoint (stable) regions of chromosomes indicates both the regions evolved in distinctly different ways ( http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2675965/). These breakage may lead to genetic diseases or participate to chromosomal rearranmgnets and contributed in development of new species.

I will try to explain the genome hotspots/Evolutionary Breakpoint Regions(EBRs)/fragile regions/weak fragments/ in my next blog.

Software for recombination detection:

RAT http://cbr.jic.ac.uk/dicks/software/RAT/

Breakpointer https://github.com/ruping/Breakpointer

DRP http://web.cbio.uct.ac.za/~darren/rdp.html

RB-finder http://www.ncbi.nlm.nih.gov/pubmed/18707535

LDhat2.0 http://ldhat.sourceforge.net/LDhat2.0/instructions.shtml

Reference:

http://www.nature.com/scitable/topicpage/genetic-recombination-514#

Image: Wikipedia , sciencelearn.org.nz

Recommended Articles:

http://www.friendshipcircle.org/blog/2012/05/22/13-chromosomal-disorders-youve-never-heard-of/

http://web.udl.es/usuaris/e4650869/docencia/segoncicle/genclin98/recursos_classe_%28pdf%29/revisionsPDF/chromosyndromes.pdf

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2775595/table/T2/

http://learn.genetics.utah.edu/content/disorders/chromosomal/

http://www.ncert.nic.in/html/learning_basket/biology/cc&cd.pdf

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER

JBrowse: Embeddable genome browser built completely with JavaScript and HTML5

Jit — Fri, 29 Jun 2018 09:19:56 -0500

JBrowse is a fast, embeddable genome browser built completely with JavaScript and HTML5, with optional run-once data formatting tools written in Perl. Headline Features: Fast, smooth scrolling and zooming. Explore your genome with unparalleled speed. Scales easily to multi-gigabase genomes and deep-coverage sequencing. Quickly open and view data files on your computer without uploading them to any server. Supports GFF3, BED, FASTA, Wiggle, BigWig, BAM, VCF (with either .tbi or .idx index), REST, and more. BAM, BigBed, BigWig, and VCF data are displayed directly from chunks of the compressed binary files, no conversion needed. Includes an optional “faceted” track selector (see demo) suitable for large installations with thousands of tracks. Very light server resource requirements. In fact, JBrowse has no back-end server code, just tools for formatting data files to be read directly over HTTP. Serve huge datasets from a single low-cost cloud instance. Can run as a stand-alone app on OSX and Windows using the Electron platform Highly extensible plugin architecture, with a large plugin registry of existing examples here https://gmod.github.io/jbrowse-registry https://jbrowse.org/

Address of the bookmark: https://github.com/GMOD/jbrowse

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

Long read assembly workshop !

Rahul Nayak — Thu, 04 Oct 2018 17:23:18 -0500

This is a tutorial for a workshop on long-read (PacBio) genome assembly.

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/

Genobuntu: A software package containing more than 70 software and packages oriented towards NGS and genome assembly

BioStar — Tue, 11 Dec 2018 05:15:57 -0600

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

https://sourceforge.net/projects/genobuntu/

Address of the bookmark: https://sourceforge.net/projects/genobuntu/