Address of the bookmark: https://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE

The most common newbie questions are:

Should I try to use these free open source programs?  Why are we not trying GUI software for computational analysis? Should I use commercial bioinformatics programs/software?”

1. Let’s be open

We generally think free and cheap are useless. But this concept is not applicable when we discuss open source software. Mostly, the bioinformatics software is developed by highly competitive biological programmers who believe in open sharing of knowledge. They come under Open Bioinformatics Foundation or O|B|F which is a non-profit, volunteer run organization focused on supporting open source programming in bioinformatics. The best part about open source tools/software is that they’re free to download the source code and read exactly what the program does. If you are so inclined, you can view all of the parts of the program and see the logical flow of the pipeline. In addition, open source makes an excellent learning tool for any beginning bioinformatician. Moreover, you can modify existing open source programs to deal with cutting-edge problems or to customize your pipeline. Apart from your computational and analysis work, most of the reviewer also prefers the open source based results so that they can validate the results if validation required.

2. Code headache

As a bioinformatician you are supposed to know the basics of programming languages, and if you are not good at it, then please learn it as soon as possible because you are not a bio-analyst but biological programmers. The open source programs usually lack dedicated service and support teams (often because they were the product of an overworked doc/postdoc!) so you are responsible for troubleshooting your own errors most of the time. We commonly receive the HELP email to support and assist to setup the pipeline; you can also find this kind of request on any QA forum. I personally believe this coding horror brings the biggest downside of open-source programs; where you need some programming skills in order to implement the program in your pipeline. But, if you are not able to fix the pipeline and modify the open source code according to your requirements them you should re-think on your bioinformatician name tag!!!

3. Dive into the codes

Some of the biologist turn bioinformatician says “if you can do the same thing with commercial software then why to get migraine with weird codes”, well this statement looks to me that guys are keen to learn swimming but still don’t like to get wet. If you are still using paid software and doing your work by customer support and clicking some of the well-designed GUI button then perhaps you are not interested in learning and trying new and challenging bioinformatics works. You are missing the basic flavour of bioinformatics. Let’s dive into the coding world, I am sure your will enjoy it. I recommend your to swim freely in code’s sea, and enjoy the journey; do not merely watch it from the outside.  

4. Paid does not mean better

The bioinformatics company which are specializes in bioinformatics solutions develop well designed/packed, user friendly software by using a large number of specialised scientist, programmers and support staff. They also provide good services to accomplice your biological analysis work. This means that if you hit a ‘snag’ with your data, help is likely only a phone call away! These companies price their products competitively against the cost of a dedicated bioinformatician. You may be able to afford the program, but not the additional staff! Additionally, most of the functionality that you need in your analysis is already coded into the program. Need to plot a graph? Just click this button right here. It is that easy. But, as a bioinformatician this is not generally well encouraged approach in biological analysis work, because the software is not available to everyone and your data can’t be validated. Moreover, there is very less chances that anyone will repeat your work or love to do similar kind of research (because not all the labs in the world are rich like yours).

5. Take a caution

In biological analysis work, in which you deal GB/TB of data are having maximum chances of getting errors, so please be careful and always cross check your data before coming to any conclusion. Even an error in two line code can alter your entire analysis and display weird results. Some of the scientist blindly believes on commercial software, which is entirely wrong. Using proprietary tools does not absolve you of the need to actually read and research the type of analysis that you are doing. This is particularly true in the case of genome assembly and annotation.

At the end, I would like to tell only one think that open source solutions allows you to do more cutting edge analysis than the commercial tools. So let’s go for it.

Disclaimer:

This is my personal view. I have nothing to do with any company or open source community. The views expressed on these pages are mine alone and not those of my current/past employers. I do reserve the right to remove comments left by spammers or off-topic comments.

Classificier of reads from metagenomic sequencing experiments.

•  Kawulok, J., Deorowicz, S., CoMeta: Classification of Metagenomes Using k-mers, PLOS ONE, 2015; 10(4):1–23,

CoMSA

Compressor of multiple sequence alignments of proteins.

•  Deorowicz, S., Walczyszyn, J., Debudaj-Grabysz, A., CoMSA: compression of protein multiple sequence alignment files, Bioinformatics, 2019; 35(2):22–234,

DSRC

Compressor of sequencing reads.

•  Roguski, L., Deorowicz, S., DSRC 2: Industry-oriented compression of FASTQ files, Bioinformatics, 2014; 30(15):2213–2215,
•  Deorowicz, S., Grabowski, Sz., Compression of DNA sequences in FASTQ format, Bioinformatics, 2011; 27(6):860–862,

FAMSA

Multiple sequence alignment designed for huge families of proteins (even containing hundreds of thousands of sequences).

•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., FAMSA: Fast and accurate multiple sequence alignment of huge protein families, Scientific Reports, 2016; 6(33964):

FaStore

Compressor of FASTQ files.

•  Roguski, L., Ochoa, I., Hernaez, M., Deorowicz, S., FaStore - a space-saving solution for raw sequencing data, Bioinformatics, 2018; 34(16):2748–2756,

FQSqueezer

Experimental high-end compressor of FASTQ files.

•  Deorowicz, S., FQSqueezer: k-mer-based compression of sequencing data, Scientific Reports, 2020; 10(578):

GDC

Compressor of collections of genome sequences.

•  Deorowicz, S., Danek, A., Niemiec, M., GDC 2: Compression of large collections of genomes, Scientific Reports, 2015; 5(11565):1–12,
•  Deorowicz, S., Grabowski, Sz., Robust relative compression of genomes with random access, Bioinformatics, 2011; 27(21):2979–2986,

GTC

Genotype databases compressor with support for fast queries.

•  Danek, A., Deorowicz, S., GTC: how to maintain huge genotype collections in a compressed form, Bioinformatics, 2018; 34(11):1834–1840,

GTShark

Genotypes compressor.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, Bioinformatics, 2019; 35(22):4791–4793,

KMC

Memory frugal k-mer counter.

•  Kokot, M., Długosz, M., Deorowicz, S., KMC 3: counting and manipulating k -mer statistics, Bioinformatics, 2017; 33(17):2759–2761,
•  Deorowicz, S., Kokot, M., Grabowski, Sz., Debudaj-Grabysz, A., KMC 2: Fast and resource-frugal k-mer counting, Bioinformatics, 2015; 31(10):1569–1576,
•  Deorowicz, S., Debudaj-Grabysz, A., Grabowski, Sz., Disk-based k-mer counting on a PC, BMC Bioinformatics, 2013; 14():Article no. 160,

Kmer-db

Tool for estimation of evolutionary distances in a collection of genomes.

•  Deorowicz, S., Gudys, A., Dlugosz, M., Kokot, M., Danek, A., Kmer-db: instant evolutionary distance estimation, Bioinformatics, 2019; 35(1):133–136,

MuGI

Index allowing queries for a collection of multiple genome sequences.

•  Danek, A., Deorowicz, S., Grabowski, Sz., Indexes of Large Genome Collections on a PC, PLOS ONE, 2014; 9(10):e109384,

ORCOM

Experimental compressor of sequencing reads.

•  Grabowski, Sz., Deorowicz, S., Roguski, L., Disk-based compression of data from genome sequencing, Bioinformatics, 2014; 31(9):1389–1395,

PgSA

Index allowing queries for a collection of sequencing reads.

•  Kowalski, T., Grabowski, Sz., Deorowicz, S., Indexing arbitrary-length k-mers in sequencing reads, PLOS ONE, 2015; 10(7):1–16,

QuickProbs

Multiple sequence alignment designed especially for GPU.

•  Gudys, A., Deorowicz, S., QuickProbs 2: towards rapid construction of high-quality alignments of large protein families, Scientific Reports, 2017; 7(41553):
•  Gudys, A., Deorowicz, S., QuickProbs – A Fast Multiple Sequence Alignment Algorithm Designed for Graphics Processors, PLOS ONE, 2014; 9(2):e88901,

RECKONER

Read error corrector.

•  Maciej Długosz, M., Deorowicz, S., RECKONER: read error corrector based on KMC, Bioinformatics, 2017; 33(7):1086–1089,

TGC

Compressor of collections of genomes given in Variant Call Format (VCF) files.

•  Deorowicz, S., Danek, A., Grabowski, Sz., Genome compression: a novel approach for large collections, Bioinformatics, 2013; 29(20):2572–2578,

VCFShark

Compressor of VCF files.

•  Deorowicz, S., Danek, A., GTShark: Genotype compression in large projects, biorxiv.org, 2020; ():

Whisper

Experimental mapper of whole genome sequencing data.

•  Deorowicz, S., Gudys, A., Whisper 2: indel-sensitive short read mapping, bioRxiv.org, 2019; :
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Whisper: read sorting allows robust robust mapping of DNA sequencing data, Bioinformatics, 2019; 35(12):2043–2050,
•  Deorowicz, S., Debudaj-Grabysz, A., Gudys, A., Grabowski, Sz., Robust mapping of whole genome sequencing data, Poster at The Biology of Genomes Conference, 2017;

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

MitoHiFi was first developed to assemble the mitogenomes for a wide range of species in the Darwin Tree of Life Project (DToL)

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-023-05385-y 

Address of the bookmark: https://github.com/marcelauliano/MitoHiFi

Address of the bookmark: https://github.com/Reedwarbler/GAPPadder