BOL: Related items

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Jvarkit : Java utilities for Bioinformatics

Jit — Fri, 08 Jun 2018 09:31:55 -0500

Collection of Java tool kits for bioinformatics works: Jvarkit : Java utilities for Bioinformatics

Address of the bookmark: http://lindenb.github.io/jvarkit/

Understanding PacBio

Jitendra Narayan — Fri, 24 Feb 2017 10:17:36 -0600

This tutorial includes resources for learning more about PacBio data and bioinformatics analysis, and includes content suitable for both beginners and experts. Below are links to training modules (webinars and PowerPoint presentations) to help you get started with your data processing, as well as information for specialized applications.

Training Resources:

Specialized Applications:

Address of the bookmark: https://github.com/PacificBiosciences/Bioinformatics-Training/wiki

LAST

Bulbul — Mon, 19 Dec 2016 14:07:53 -0600

LAST can:

Handle big sequence data, e.g:
- Compare two vertebrate genomes
- Align billions of DNA reads to a genome
Indicate the reliability of each aligned column.
Use sequence quality data properly.
Compare DNA to proteins, with frameshifts.
Compare PSSMs to sequences
Calculate the likelihood of chance similarities between random sequences.
Do split and spliced alignment.
Train alignment parameters for unusual kinds of sequence (e.g. nanopore).

Address of the bookmark: http://last.cbrc.jp/

pyScaf

Bulbul — Mon, 19 Dec 2016 14:20:33 -0600

pyScaf orders contigs from genome assemblies utilising several types of information:

paired-end (PE) and/or mate-pair libraries (NGS-based mode)
long reads (NGS-based mode)
synteny to the genome of some related species (reference-based mode)

Scaffolding

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

matches not satisfying cut-offs (--identity and --overlap)
suboptimal matches (only best match of each query to reference is kept)
and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf

GenomeComp

Jit — Fri, 17 Feb 2017 08:38:32 -0600

GenomeComp is a tool for summarizing, parsing and visualizing the genome wide sequence comparison results derived from voluminous BLAST textual output, so as to locate the rearrangements, insertions or deletions of genome segments between species or strains.

It can be easily used to compare, parsing and visualize large genomic sequences, especially closely related genomes such as inter-species or inter-strains. In addition, it can also show other sequence features like repeat sequence distributions in one whole-genome DNA sequence by comparing the genome to itself.

It is a stand-alone graphical user interface (GUI) program which runs on Linux, Unix, Mac OS X (tested on version 10.2.4 only) and Microsoft Windows platforms and is written in Perl/Tk.

Address of the bookmark: http://www.mgc.ac.cn/GenomeComp/

GeneBreak: a tool to systematically identify genes recurrently affected by the genomic location of chromosomal CNA-associated breaks by a genome-wide approach

Jit — Sat, 01 Oct 2016 15:15:29 -0500

Development of cancer is driven by somatic alterations, including numerical and structural chromosomal aberrations. Currently, several computational methods are available and are widely applied to detect numerical copy number aberrations (CNAs) of chromosomal segments in tumor genomes. However, there is lack of computational methods that systematically detect structural chromosomal aberrations by virtue of the genomic location of CNA-associated chromosomal breaks and identify genes that appear non-randomly affected by chromosomal breakpoints across (large) series of tumor samples. ‘GeneBreak’ is developed to systematically identify genes recurrently affected by the genomic location of chromosomal CNA-associated breaks by a genome-wide approach, which can be applied to DNA copy number data obtained by array-Comparative Genomic Hybridization (CGH) or by (low-pass) whole genome sequencing (WGS). First, ‘GeneBreak’ collects the genomic locations of chromosomal CNA-associated breaks that were previously pinpointed by the segmentation algorithm that was applied to obtain CNA profiles. Next, a tailored annotation approach for breakpoint-to-gene mapping is implemented. Finally, dedicated cohort-based statistics is incorporated with correction for covariates that influence the probability to be a breakpoint gene. In addition, multiple testing correction is integrated to reveal recurrent breakpoint events. This easy-to-use algorithm, ‘GeneBreak’, is implemented in R (www.cran.r-project.org) and is available from Bioconductor (www.bioconductor.org/packages/release/bioc/html/GeneBreak.html).

Address of the bookmark: http://www.bioconductor.org/packages/release/bioc/html/GeneBreak.html

PHYMMBL

Jit — Mon, 10 Oct 2016 08:56:34 -0500

Metagenomics sequencing projects collect samples of DNA from uncharacterized environments that may contain hundreds or even thousands of species. One of the main challenges in analyzing a metagenome is phylogenetic classification of raw sequence reads into groups representing the same or similar species. Such classification is a useful prerequisite for genome assembly and for analysis of the biological diversity present in a sample. The newest sequencing technologies have simultaneously made metagenomics easier, by making the sequencing process faster, and more difficult, by producing shorter read lengths than previous technologies. Methods for classifying sequences as short as 100 base pairs (bp) have until now been relatively inaccurate, requiring metagenomics projects to use older, long-read technologies. Phymm, a new classification approach for metagenomics data which uses interpolated Markov models (IMMs) to taxonomically classify DNA sequences, can accurately classify reads as short as 100 bp. Its accuracy for short reads represents a significant leap forward over previous composition-based classification methods. PhymmBL (rhymes with "thimble"), the hybrid classifier included in this distribution which combines analysis from both Phymm and BLAST, produces even higher accuracy.

Address of the bookmark: http://www.cbcb.umd.edu/software/phymm/

sockeye

Jit — Fri, 17 Feb 2017 08:51:16 -0600

This sockeye software uses the Ensembl database project to import sequence and annotation information from several eukaryotic species. A user can additionally import their own custom sequence and annotation data. Individual annotation objects are displayed in Sockeye by using custom 3D models. Ensembl-derived and imported sequences can be analyzed by using a suite of multiple and pair-wise alignment algorithms. The results of these comparative analyses are also displayed in the 3D environment of Sockeye. By using the Java3D API to visualize genomic data in a 3D environment, we are able to compactly display cross-sequence comparisons. This provides the user with a novel platform for visualizing and comparing genomic feature organization.

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3