BOL: Related items

Professor (all levels) in Bioinformatics and Computational Biology

Tue, 22 Nov 2016 05:43:38 -0600

King Abdullah University of Science and Technology (KAUST) (kaust.edu.sa) is seeking a highly motivated and skilled faculty member for the Bioinformatics track whose research focuses on development of methods and tools for Bioinformatics and Computational Biology.
KAUST is an international, graduate-level research university dedicated to advancing science and technology through interdisciplinary research, education, and innovation. Located on the shores of the Red Sea in Saudi Arabia, KAUST offers superb research facilities, generous assured research funding, and internationally competitive salaries, attracting top international faculty, scientists, engineers, and students to conduct fundamental and goal-oriented research to address the world’s pressing scientific and technological challenges in the areas of food, water, energy, and the environment.
The successful applicant is expected to develop world-leading research in domain of bioinformatics/computational biology with focus on development of novel computational approaches for efficient and accurate methods of analyzing biological phenomena at molecular level. The faculty member will be part of the Computational Bioscience Research Center (CBRC) within the Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division. The position will remain open until filled.

Requirements:

PhD or equivalent in a Computer Science, Mathematics or Engineering discipline. Candidates should be well-established within the research field relevant to the position grade. They should demonstrate original research and experience at the highest international level.

Responsibilities and tasks:

Research competence in the following areas is preferred:
Analysis of next generation sequencing (NGS) and other ‘omics’ data (e.g. CAGE, ChIP-Seq, DHS, RNA-Seq, Ribo-Seq, proteomic, metabolic and NMR spectra, etc.).
Signaling, regulatory and metabolic pathways analysis.
Development of tools (web-based and standalone) suited for efficient computational biology/bioinformatics.

Visit cemse.kaust.edu.sa to apply.

Minia

Jit — Thu, 08 Dec 2016 05:07:00 -0600

Minia is a short-read assembler based on a de Bruijn graph, capable of assembling a human genome on a desktop computer in a day. The output of Minia is a set of contigs. Minia produces results of similar contiguity and accuracy to other de Bruijn assemblers (e.g. Velvet).

Download

Minia 2.0.7 Linux 64-bits binaries (Source code) (Legacy codebase)

For the impatient

A typical Minia command line looks like:

./minia -in reads.fa -kmer-size 31 -abundance-min 3 -out output_prefix

Type

./minia

for a quick explanation of the parameters.

For more information, refer to the manual.

KmerGenie can be used to determine the best k-mer size, minimum abundance of correct k-mers, and genome size estimation for your dataset.

Address of the bookmark: http://minia.genouest.org/

EAGER

Jit — Sat, 10 Dec 2016 18:07:23 -0600

The automated reconstruction of genome sequences in ancient genome analysis is a multifaceted process.

EAGER encompasses both state-of-the-art tools for each step as well as new complementary tools tailored for ancient DNA data within a single integrated solution in an easily accessible format.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0918-z

Address of the bookmark: https://github.com/apeltzer/EAGER-GUI

GARM:Genome Assembly, Reconciliation and Merging

Jit — Mon, 19 Dec 2016 06:03:02 -0600

The pipeline is based mainly implemented using Perl scripts and modules and third-party open source software like the AMOS (Myers et al., 2000) and MUMmer (Kurtz et al., 2004) packages. The pipeline was tested on Debian, Ubuntu, Fedora and BioLinux distributions. The method merges contigs or scaffolds from different assemblers using the same or different sequencing technologies. When scaffolds are provided, a process of finding probable compressions or extensions (CE) problems in the assemblies can be per-formed; contigs are joined back into scaffolds after gap recalculation

Address of the bookmark: http://garm-meta-assem.sourceforge.net/

quickmerge: A simple and fast metassembler and assembly gap filler designed for long molecule based assemblies.

Jit — Mon, 19 Dec 2016 10:23:36 -0600

quickmerge uses a simple concept to improve contiguity of genome assemblies based on long molecule sequences, often with dramatic outcomes. The program uses information from assemblies made with illumina short reads and PacBio long reads to improve contiguities of an assembly generated with PacBio long reads alone. This is counterintuitive because illumina short reads are not typically considered to cover genomic regions which PacBio long reads cannot. Although we have not evaluated this program for assemblies generated with Oxford nanopore sequences, the program should work with ONP-assemblies too.

Address of the bookmark: https://github.com/mahulchak/quickmerge

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

bedtools

Jit — Fri, 24 Feb 2017 04:50:44 -0600

Collectively, the bedtools utilities are a swiss-army knife of tools for a wide-range of genomics analysis tasks. The most widely-used tools enable genome arithmetic: that is, set theory on the genome. For example, bedtools allows one tointersect, merge, count, complement, and shuffle genomic intervals from multiple files in widely-used genomic file formats such as BAM, BED, GFF/GTF, VCF. While each individual tool is designed to do a relatively simple task (e.g., intersect two interval files), quite sophisticated analyses can be conducted by combining multiple bedtools operations on the UNIX command line.

bedtools is developed in the Quinlan laboratory at the University of Utah and benefits from fantastic contributions made by scientists worldwide.

Address of the bookmark: http://bedtools.readthedocs.io/en/latest/index.html

PhenoGram

Jit — Tue, 07 Mar 2017 08:35:12 -0600

With PhenoGram researchers can create chomosomal ideograms annotated with lines in color at specific base-pair locations, or colored base-pair to base-pair regions, with or without other annotation. PhenoGram allows for annotation of chromosomal locations and/or regions with shapes in different colors, gene identifiers, or other text. PhenoGram also allows for creation of plots showing expanded chromosomal locations, providing a way to show results for specific chromosomal regions in greater detail.

Address of the bookmark: http://ritchielab.psu.edu/software/phenogram-downloads

Structural polymorphism analysis from NGS data

Sat, 13 Jul 2013 17:12:47 -0500

The LabEx BASC (Biodiversity, Agroecosystems, Society, Climate), a network of 13 laboratories of the Paris-Saclay Scientific Cluster, is seeking a bioinformatician to analyze Next Generation Sequencing (NGS) data analysis. In the context of a flagship project aiming at understanding and improving the adaptive capacity of agroecosystems it will be critical to establish a link between sequence variation, functional variation, gene/protein expression and phenotypic adaptation.

The successful candidate will be in charge of the detection of polymorphisms including structural variants, of the comparison of multiple and diverse genomes of a same species and of the construction of pan- and core-genomes. These challenging tasks will require bioinformatics developments and implementation of methods for accommodating the high level of repetitiveness of complex genomes. The tools will be integrated into pipelines and made available to end-users through the Galaxy platform. The bioinformatician will therefore also have to provide researchers with advices on their experimental designs in order to ensure compliance of produced datasets with pipelines requirements. He/she will be hosted by a bioinformatics/informatics team (7 people) (http://moulon.inra.fr/index.php/fr/equipestransversales/atelier-de-bioinformatique) which has computational facilities and expertise in NGS data analysis, and will benefit as well from national and international collaborative networks (Aplibio http://www.renabi.fr/platforms/aplibio/, Transplant http://transplantdb.eu, AMAIZING http://www.amaizing.fr/).

The position requires a doctoral degree (PhD) in bioinformatics with strong expertise in script writing (Python/Perl) and pipeline development.

Applicants should send a CV and the names of 2 referees willing to provide a letter of recommendation to joets@moulon.inra.fr.

Fools guide

Poonam Mahapatra — Sun, 02 Apr 2017 14:31:18 -0500

This website and accompaning documents are intended as a tool to help researchers dealing with non-model organisms acquire and process transcriptomic high-throughput sequencing data without having to learn extensive bioinformatics skills. It covers all steps from tissue collection, sample preparation and computer setup, through addressing biological questions with gene expression and SNP data.

http://sfg.stanford.edu/denovo.html

http://sfg.stanford.edu/sequencing.html

http://sfg.stanford.edu/BLAST.html

http://sfg.stanford.edu/denovo.html

Address of the bookmark: http://sfg.stanford.edu/guide.html