1. Make friends with local bioinformatics groups
2. Talk to your computing group
3. Obtain clear expectations
4. Rewrite your job description
5. Papers
6. Attend bioinformatics meetings
7. Try first, ask later

Address of the bookmark: http://biomickwatson.wordpress.com/2013/04/23/a-guide-for-the-lonely-bioinformatician/

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

The Job detail

Advancing the SNP-discovery and polymorphism assessment work across several germplasm panels representing global genetic diversity
Population genetic and genomic analyses, testing the hypothesis related to adaptation in multiple geographic regions
Develop SNP assays from large scale GBS and other re-sequencing data for several target traits utilizing available phenotyping data
Combined analyses of genotypic and phenotypic data for discovery of marker-trait associations, and conducting GWAS
Processing, analyzing, and archiving large-scale genomic data sets, assessing data quality, conducting analyses, interpreting findings, and communicating findings to others including preparation of reports, presentations, posters and journal articles
Providing support to MSc and PhD students on topic related to its major core of research
Any other work assigned by the supervisor

The Person:

PhD in bioinformatics, genetics, computational biology preferably with 1 to 2 years of experience;
familiar with standard bioinformatics tools and scripting languages and emerging and evolving software platforms relevant to bioinformatics and computational biology;
ability to create new analytical pipelines; experience with handling large data sets;
ability to program in at least two of the following: C++, PERL, Python, R, Java.
will use next-generation sequencing technologies to generate marker data for genetic mapping and transcriptome data for expression QTL mapping, and will be responsible for data generation as well as data analysis.

Period and Remuneration: The assignment is for a period of two years, and can be extended for another year depending on performance. ICRISAT pays a very attractive all inclusive lump sum assignment fee payable in Indian Rupees.

How to Apply: Please send your application by email to icrisatjobs@cgiar.org, stating the job title (Special project Scientist-Sorghum Genomics) clearly in the subject column, addressed to the Director, Human Resources and Operations, ICRISAT, Patancheru, Andhra Pradesh 502 324, India, latest by 10 June 2014. The application should include an up-to-date Curriculum Vitae, a short statement of competencies and experience for the position, and the names and addresses (including phone/e-mail) of three referees. Only short-listed candidates will be contacted.

More at: http://www.icrisat.org/careers/Special-Project-Scientist-Sorghum-Genomics.htm

Address of the bookmark: https://biokit.readthedocs.io/en/latest/index.html

Webpage : https://www.scilifelab.se/about-us/
Opportunity: https://www.scilifelab.se/about-us/career/

Can't locate XML/parser.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl/5.10.0 .)

Manual Method of Perl Module Installation

• Install Perl Modules Manually

This manual method is very useful when your computer or server is not connected to the Internet.

Download Perl module:
Go to CPAN Search website and search for the module that you wish to download. In this example, let us search, download and install XML::Parser Perl module. I have downloaded the XML-Parser-2.36.tar.gz to /home/download

# cd /home/download
# gzip -d XML-Parser-2.36.tar.gz
# tar xvf XML-Parser-2.36.tar
# cd XML-Parser-2.36

Build the perl module:
Build by running Makefile.PL, remember the case sensitivity, make and make test.

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
# make
# make test

Install the perl module:
Now your package is ready to install.

# make install

As a newbie it looks pretty simple, and one go. But, luckily this is a very simple one module with no dependencies. Typically, Perl modules will be dependent on several other modules. Just imagine chasing all these dependencies one-by-one, thinking ... oh ye I got it. That will be very painful and annoying task. I recommend the CPAN method of installation as shown below.

Install Perl Modules using CPAN automatically

Logically, you should must have the CPAN perl module installed in your server or computer before you can install any other Perl modules using CPAN. I know you  are laughing, "to install a perl module you need another perl module"  ;)

Lets verify whether CPAN is already installed:

To install Perl modules using CPAN, make sure the cpan command is working. Following are the error message when CPAN module is not installed.

# cpan
-bash: cpan: command not found

# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0
/usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.10.0 .).
BEGIN failed--compilation aborted.

Install the CPAN module using yum:
If CPAN in not installed in your system, you can use "yum" for the rescue. Dont worry biological data cruncher, this is true we are now dependent all these tiny magicians :).

# yum install perl-CPAN

Output of yum install perl-CPAN command:

Loaded plugins: refresh-packagekit
updates-newkey                       | 2.3 kB     00:00
primary.sqlite.bz2                   | 2.4 MB     00:00
Setting up Install Process
Parsing package install arguments

Resolving Dependencies
Transaction Summary
=============================================================================
Install      5 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): perl-ExtUtils-ParseXS-2.18-31.fc9.i386.rpm     |  30 kB     00:00
(2/5): perl-Test-Harness-2.64-31.fc9.i386.rpm         |  70 kB     00:00
(3/5): perl-CPAN-1.9205-31.fc9.i386.rpm               | 217 kB     00:00
(4/5): perl-ExtUtils-MakeMaker-6.36-31.fc9.i386.rpm   | 284 kB     00:00
(5/5): perl-devel-5.10.0-31.fc9.i386.rpm              | 408 kB     00:00

Installing     : perl-ExtUtils-ParseXS                             [1/5]
Installing     : perl-devel                                        [2/5]
Installing     : perl-Test-Harness                                 [3/5]
Installing     : perl-ExtUtils-MakeMaker                           [4/5]
Installing     : perl-CPAN                                         [5/5]


Installed: perl-CPAN.i386 0:1.9205-31.fc9
Dependency Installed:
  perl-ExtUtils-MakeMaker.i386 0:6.36-31.fc9
  perl-ExtUtils-ParseXS.i386 1:2.18-31.fc9
  perl-Test-Harness.i386 0:2.64-31.fc9
  perl-devel.i386 4:5.10.0-31.fc9
Complete!

Configure cpan the first time:
Once the CPAN is installed, you need to configure it by executing cpan, you should set some configuration parameters as shown below. I have shown only the important configuration parameters below. Accept all the default values by pressing enter.

Note: Make sure to execute “o conf commit” in the cpan prompt after the configuration to save the settings.

# cpan

Sorry, we have to rerun the configuration dialog for CPAN.pm due
to some missing parameters...

CPAN build and cache directory? [/root/.cpan]
Download target directory? [/root/.cpan/sources]
Directory where the build process takes place? [/root/.cpan/build]

Always commit changes to config variables to disk? [no]
Cache size for build directory (in MB)? [100]
Let the index expire after how many days? [1]

Perform cache scanning (atstart or never)? [atstart]
Cache metadata (yes/no)? [yes]
Policy on building prerequisites (follow, ask or ignore)? [ask]

Parameters for the 'perl Makefile.PL' command? []
Parameters for the 'perl Build.PL' command? []

Your ftp_proxy? []
Your http_proxy? []
Your no_proxy? []
Is it OK to try to connect to the Internet? [yes]

First, pick a nearby continent and country by typing in the number(s)
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5

(1) Bahamas
(2) Canada
(3) Mexico
(4) United States
Select your country (or several nearby countries) [] 4

(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan-du.viaverio.com/pub/CPAN/
(4) ftp://cpan-sj.viaverio.com/pub/CPAN/
(5) ftp://cpan.calvin.edu/pub/CPAN
(6) ftp://cpan.cs.utah.edu/pub/CPAN/
e.g. '1 4 5' or '7 1-4 8' [] 2-16

cpan[1]> o conf commit
commit: wrote '/usr/lib/perl5/5.10.0/CPAN/Config.pm'

cpan[2]> quit
No history written (no histfile specified).
Lockfile removed.

• Install Perl Modules using CPAN

Hey smile please, now you are ready with CPAN and can download modules in one line command.

You can use one of the following method to install a Perl module using cpan:

# perl -MCPAN -e 'install Bundle::BioPerl'

(or)

# cpan
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)

cpan[1]> install "Bundle::BioPerl"

In the example above, CPAN will check for Bundle::BioPerl dependencies and automatically resolves and installs Bundle::BioPerl with all the dependent Perl modules.

• Quick Ways

Oh, look at your face.. smily hmm :). This is what your are looking for, a quick and best way to install Perl modules, Bioperl. Following are the the steps to download BioPerl in your server/computer.

# sudo apt-cache search perl BioPerl

Output will be like as follows:

bioperl - Perl tools for computational molecular biology
bioperl-run - BioPerl wrappers: scripts
libbio-perl-perl - BioPerl core perl modules
libbio-perl-run-perl - BioPerl wrappers: modules
libbio-samtools-perl - Perl interface to SamTools library for DNA sequencing
libbiojava-java - Java API to biological data and applications (default version)
libbiojava3-java - Java API to biological data and applications (default version)
python-biopython-sql - Biopython support for the BioSQL database schema
libbtlib-perl - library for basic sequence manipulation

# sudo apt-get install bioperl

If it is installed then flash the following message:

Reading package lists... Done
Building dependency tree      
Reading state information... Done
bioperl is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.

In it is found not installed in your server or system them install all with dependencies.

You can use the same approach to install all the modules, and packages if required.

Thanks for reading. Best of luck for your research.

Walk- in- Test cum Interview (based on test) for the selection of Research Associate

under the scheme “Distributed Information Sub Centre –DISC” & Research Assistant under scheme “Phytophthora, Fusarium and Ralstonia diseases of Horticultural and Field Crops” will be held at this Institute as per details indicated below.

WALK -IN- TEST CUM INTERVIEW

Name of the post : Research Associate

Date of Interview : 21-05-2014 at 10.00 AM

No. of posts : One

Qualifications : a)Essential

Ph.D Degree in Bioinformatics OR : Masters degree in Bioinformatics with a minimum of
60% marks or equivalent OGPA with at least two years research experience as evidenced from fellowship/ associateship/training/published papers etc.

b)Desirable: Experience in NGS data analysis.

Emoluments : Rs. 23,000/- per month + HRA (Masters Degree Holders)

Rs. 24,000/- per month + HRA (Ph.D Degree Holders)

Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)

Duration of Project : Till 31-03-2017.

Title of Assigment : Research Assistant (on contract basis)

No. of vacancy : One

Qualification : Essential : Post Graduation in Bioinformatics and Minimum one year experience in NGS data analysis

Desirable : Experience in Perl/Python/R

Remuneration : Rs. 20,000/- per month (consolidated)

Scope of work :

1. Analysis of different file formats and their conversions.

2. Assessing the quality of data and filtering of raw reads.
3. Assembling the raw reads-de novo as well as reference mapping.
4. Compression of aligned reads using Jam tools
5. RNA-seq. Analysis
6. Differential expression testing involving Normalization, Statistical testing, heat map generation & hierarchical clustering
7. Annotating the assembled genome and geneet testing and their validation
8. Metabolic pathway analysis
9. Comparative genomics
10. Setting up of genome browsers.

Period of Assigment : Initially for six months.

Date & Venue of Interview : 21-05-2014 at IISR, Kozhikode at 10.00 AM

More at http://www.spices.res.in/pdf/disc-advtmnt.pdf

http://ritg.med.harvard.edu/training/perl/RC_Perl_Intro.pdf

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

I google it and found that Strawberry comes with additional dev tools to compile CPAN modules if necessary. Whereas ActivePerl has a lot of prepackaged modules which are easier to install with PPM. In addition, DWIM Perl contains the standard Perl and a lot of extension and Citrus Perl is a binary distribution of Perl created for GUI application developers. 

Now, I wonder what should I pick to get started? 

Note: I am going to use BioPerl in near future.

http://dwimperl.com/

http://www.activestate.com/activeperl

http://www.citrusperl.com/

http://strawberryperl.com/