BOL: Related items

Quip: Aggressive compression of FASTQ, SAM and BAM files.

Neel — Tue, 24 May 2022 06:31:48 -0500

This will help us to reduce the amount of drive space we take up and decrease data transfer times

Quip compresses next-generation sequencing data with extreme prejudice. It supports input and output in the FASTQ and SAM/BAM formats, compressing large datasets to as little as 15% of their original size.

Address of the bookmark: https://github.com/dcjones/quip

Professor/Associate Professor/ Assistant Professor at Chettinad Academy of Research and Education

Sat, 24 May 2014 00:00:15 -0500

OPEN FACULTY POSITION

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

AfterQC: Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data

Jit — Fri, 29 Jun 2018 03:26:03 -0500

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data AfterQC can simply go through all fastq files in a folder and then output three folders: good, bad and QC folders, which contains good reads, bad reads and the QC results of each fastq file/pair. Currently it supports processing data from HiSeq 2000/2500/3000/4000, Nextseq 500/550, MiniSeq...and other Illumina 1.8 or newer formats The author has reimplemented this tool in C++ with multithreading support to make it much faster. The new tool is called fastp and can be found at: https://github.com/OpenGene/fastp . If you prefer a C++ based tool, please use fastp instead. https://github.com/OpenGene/AfterQC

Address of the bookmark: https://github.com/OpenGene/AfterQC

The Minerva Research Group for Bioinformatics

Tue, 27 May 2014 15:48:14 -0500

The focus of the bioinformatics group is to use computational approaches to gain an insight into genome evolution in primates.

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

Jit — Fri, 05 Jan 2018 04:12:20 -0600

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

outperforms PacBioToCA/LSC in terms of accuracy and contiguity/sensitivity (http://dx.doi.org/10.1093/bioinformatics/btu392)
is easy to install/run/configure
supports various types of dat
- HiSeq/MiSeq (100-500bp)
- Unitigs
- 454, ...

proovread maps high coverage data to pacbio reads (bwa mem, blasr, daligner) in multiple iterations.

Address of the bookmark: https://github.com/BioInf-Wuerzburg/proovread

Monitor running jobs on Linux server

Jitendra Narayan — Fri, 06 Jun 2014 16:18:43 -0500

You as a bioinformatican run lots of program on your servers. Sometime the shared server is also used by your colleague. If server is busy you sometime need to check the running programs and want to monitor the running programs as well. The "top" command will come in handy when you need to find out if things are still running, how long they’ve been running, or how much memory is being used.

‘top’ is very simple to run: type

%% top

You’ll get a screen that looks like this, and is updated regularly:

Simple, right? Heh.

First! Note that you can use ‘q’ or ‘CTRL-C’ to exit from ‘top’.

Now let’s read and understand at each line independently.

The first line:

top - 23:00:48 up 39 days, 2 user, load average: 0.00, 0.00, 0.00

The first line tells you the current time, how long the machine has been up, how many users are logged in, and the short/medium/long-term compute load on the machine. If you run something for a long time, you’ll see these numbers go up. Right now, the machine is basically just sitting there, so these are all close to 0.

The second line:

Tasks: 239 total,   1 running, 238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used, 14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
1 root      39 19 0 0 0 S 0.0 0.0   246:57.22 kipmi0
2 root      RT   0     0    0    0 S 0.0 0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

Genomics and Personalized Medicine Breakthroughs

Sun, 01 Jun 2014 23:40:14 -0500

http://bit.ly/e8QGzY Human genome mapping is now enabling a breakthrough in medical innovation -- personalized medicine. What does this mean for patients? We can now identify predispositions to disease, predict how we metabolize drugs, and figure out what kinds of treatments we may respond to, and even determine when a drug may give us an adverse reaction. All medical specialties benefit from human genome intelligence -- oncology saw the first impacts -- but advances are now being seen in cardiology, obstetrics and gynecology, pediatric diseases, gastroenterology, rheumatology, immunology and other areas. This video covers the areas that genetic medicine is impacting and where the future of genomic medicine is heading.

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

Assistant Professor in Bioinformatics at Dr. D. Y. Patil Biotechnology & Bioinformatics Institute

Tue, 03 Jun 2014 19:54:15 -0500

Dr. D. Y. Patil Biotechnology & Bioinformatics Institute
Tathawade, Pune 411033.

Assistant Professor in Bioinformatics

Essential :
First Class Master’s Degree in the appropriate branch of Life Sciences / Technology (Tech.)
OR
Ph.D in Life Sciences or in the respective subject area of specialization
OR
Good Academic record with at least 55% marks (or an equivalent grade) at the Master’s Degree level, in the relevant subject or an equivalent degree from an Indian / Foreign University.
Besides fulfilling the above qualifications, candidates should have cleared the eligibility test (NET) for lecturers conducted by the UGC, CSIR or similar test accredited by the UGC and as per the requirements of UGC guidelines.

Desirable :
Teaching, research industrial and/or professional experience in a reputed organization.
Papers presented at Conferences and/or in refereed journals

Note : Application are invited in prescribed form Click here for Application Form
Kindly send your applications to “Registrar, Dr. D. Y. Patil Vidyapeeth, Pune, Sant Tukaram Nagar, Pimpri, Pune – 411018., Maharashtra, India.” should reach in the University office within 15 days from the publication.

More Info: http://www.dpu.edu.in/BiotechResearchPositions.aspx