7th ADVERTISEMENT – 2014 (2)

INSPIRE Faculty Scheme: a component of “Assured Opportunity for Research Career (AORC)” under INSPIRE.

The Department of Science and Technology, Government of India, has launched the “Innovation in Science Pursuit for Inspired Research (INSPIRE)” [http://www.inspire-dst.gov.in] program in 2008.

The program aims to attract talent for study of science and careers with research. INSPIRE includes many components. The importance of Assured Career Opportunity in R&D sector has been recognized.

INSPIRE Faculty Scheme opens up an “Assured Opportunity for Research Career (AORC)” for young researchers in the age group of 27-32 years. It offers a contractual research awards to young achievers and opportunity for independent research in the near term and emerge as a future leader in the long term.

Eligibility

Essential Indian citizens and people of Indian origin including NRI/PIO status with PhD (in science, mathematics, engineering, pharmacy, medicine, and agriculture related subjects) from any recognized university in the world,

Those who have submitted their PhD Theses and are awaiting award of the degree are also
eligible. However, the award will be conveyed only after confirmation of the awarding the
PhD degree.

The upper age limit as on 1st July 2014 should be 32 years for considering support for a
period of 5 years. However, for SC and ST candidates, upper age limit will be 35 years.

Publication(s) in highly reputed Journals demonstrating research potential of the candidate.

Desirable

Candidates who are within top 1% at the School Leaving Examination, IIT-JEE rank, 1st Rank Holder either in graduation or post-graduation level university examination (which are used presently for identifying INSPIRE Scholars at under-graduate level and INSPIRE Fellows for doctoral degree)

More at http://www.inspire-dst.gov.in/faculty_scheme.html

The data are available using NCBI accession IDs: BioProject: (PRJNA483067), assembly: [RBJD00000000] and sequence data (SRP155659).

Additional Resources

• Interactive map showcasing global initiatives underway to generate reference-quality human genome assemblies for diverse populations
• BioReport Podcast on the value of ethnic-specific reference genomes
• Nature Reviews Genetics paper from NHGRI: Prioritizing diversity in human genomics research
• Article in The Journal of Precision Medicine: “Minority Report – Ethnic Diversity and the Real Promise for Precision Medicine”
• Article in Bio-IT World: “Genomic Data Standards Are a Necessity”
• NHGRI Project Award: High Quality Human and Non-Human Primate Genome Assemblies

More details are available on the PacBio website:

• Blog post: Data Release: Highest-Quality, Most Contiguous Individual Human Genome Assembly to Date
• Blog post: For Reference-Grade Human Genome Assemblies, SMRT Sequencing Yields Optimal Results
• Webinar:  Assembling High-Quality Human Reference Genomes for Global Populations
• FALCON-Phase press release and article preprint
• PacBio research focus webpage about Human Population Genetics

 Ref: https://stockguru.com/2018/10/08/pacific-biosciences-releases-highest-quality-most-contiguous-individual-human-genome-assembly-to-date/

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

More at https://attendee.gotowebinar.com/register/8452228815737989634

MitoHiFi was first developed to assemble the mitogenomes for a wide range of species in the Darwin Tree of Life Project (DToL)

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-023-05385-y 

Address of the bookmark: https://github.com/marcelauliano/MitoHiFi

Interested candidates may email their resume along with a cover letter to careers@arraygen.com

Official website: http://www.arraygen.com/

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

New Delhi-110012

Walk in interview

Eligible candidates may appear for Walk-in interview for the temporary positions of JRF/SRF/ RA, in ICAR, DBT funded research projects. Positions are purely temporary in nature and are co-terminus with the projects. The initial appointment will be for maximum one year, which can be extended on the basis of assessment of the candidate performance and need in the project work (PI-Dr. N. K. Singh, National Professor).

Name of the

PI (Project)

Name of

Position

Number of

positions

Emoluments

Fixed per

month (Rs.)

Essential

Qualifications

DBT-“Physical Mapping and Sample sequencing of Wheat Chromosome 2A- International Wheat Genome Sequencing Consortium (India)”.

(Up to Nov,2014)

DBT- Identification and functional analysis of genes related to yield and biotic stresses (Up to Oct,2014)

NPTC-Central Facility

RA (Master)

JRF/SRF

Research Associate: One

Essential: MCA or M. Tech. (Bioinformatics and computer Science with 2 years experience in Database Management with

MySQL, Linux)

Desirable: Proficiency in handling of large biological databases

Age limit: Max. Age 35 years (Age of relaxation of 5 years for SC/ST& woman. and 3 years for OBC). The interview will be held on 08 July, 2014 at 11 am at room no. 39, NRCPB, LBS Building, Pusa Campus, New Delhi-110012. The candidates must bring original certificates and four copies of biodata, and recent passport size photograph. No TA/DA would be given for the appearance in interview. Only the candidates having essential qualifications would be entertained for the interviews.

Advertisement:

www.nrcpb.org/sites/default/files/news%20paper%20advirtisment..docx

Can't locate XML/parser.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl/5.10.0 .)

Manual Method of Perl Module Installation

• Install Perl Modules Manually

This manual method is very useful when your computer or server is not connected to the Internet.

Download Perl module:
Go to CPAN Search website and search for the module that you wish to download. In this example, let us search, download and install XML::Parser Perl module. I have downloaded the XML-Parser-2.36.tar.gz to /home/download

# cd /home/download
# gzip -d XML-Parser-2.36.tar.gz
# tar xvf XML-Parser-2.36.tar
# cd XML-Parser-2.36

Build the perl module:
Build by running Makefile.PL, remember the case sensitivity, make and make test.

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
# make
# make test

Install the perl module:
Now your package is ready to install.

# make install

As a newbie it looks pretty simple, and one go. But, luckily this is a very simple one module with no dependencies. Typically, Perl modules will be dependent on several other modules. Just imagine chasing all these dependencies one-by-one, thinking ... oh ye I got it. That will be very painful and annoying task. I recommend the CPAN method of installation as shown below.

Install Perl Modules using CPAN automatically

Logically, you should must have the CPAN perl module installed in your server or computer before you can install any other Perl modules using CPAN. I know you  are laughing, "to install a perl module you need another perl module"  ;)

Lets verify whether CPAN is already installed:

To install Perl modules using CPAN, make sure the cpan command is working. Following are the error message when CPAN module is not installed.

# cpan
-bash: cpan: command not found

# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0
/usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.10.0 .).
BEGIN failed--compilation aborted.

Install the CPAN module using yum:
If CPAN in not installed in your system, you can use "yum" for the rescue. Dont worry biological data cruncher, this is true we are now dependent all these tiny magicians :).

# yum install perl-CPAN

Output of yum install perl-CPAN command:

Loaded plugins: refresh-packagekit
updates-newkey                       | 2.3 kB     00:00
primary.sqlite.bz2                   | 2.4 MB     00:00
Setting up Install Process
Parsing package install arguments

Resolving Dependencies
Transaction Summary
=============================================================================
Install      5 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): perl-ExtUtils-ParseXS-2.18-31.fc9.i386.rpm     |  30 kB     00:00
(2/5): perl-Test-Harness-2.64-31.fc9.i386.rpm         |  70 kB     00:00
(3/5): perl-CPAN-1.9205-31.fc9.i386.rpm               | 217 kB     00:00
(4/5): perl-ExtUtils-MakeMaker-6.36-31.fc9.i386.rpm   | 284 kB     00:00
(5/5): perl-devel-5.10.0-31.fc9.i386.rpm              | 408 kB     00:00

Installing     : perl-ExtUtils-ParseXS                             [1/5]
Installing     : perl-devel                                        [2/5]
Installing     : perl-Test-Harness                                 [3/5]
Installing     : perl-ExtUtils-MakeMaker                           [4/5]
Installing     : perl-CPAN                                         [5/5]


Installed: perl-CPAN.i386 0:1.9205-31.fc9
Dependency Installed:
  perl-ExtUtils-MakeMaker.i386 0:6.36-31.fc9
  perl-ExtUtils-ParseXS.i386 1:2.18-31.fc9
  perl-Test-Harness.i386 0:2.64-31.fc9
  perl-devel.i386 4:5.10.0-31.fc9
Complete!

Configure cpan the first time:
Once the CPAN is installed, you need to configure it by executing cpan, you should set some configuration parameters as shown below. I have shown only the important configuration parameters below. Accept all the default values by pressing enter.

Note: Make sure to execute “o conf commit” in the cpan prompt after the configuration to save the settings.

# cpan

Sorry, we have to rerun the configuration dialog for CPAN.pm due
to some missing parameters...

CPAN build and cache directory? [/root/.cpan]
Download target directory? [/root/.cpan/sources]
Directory where the build process takes place? [/root/.cpan/build]

Always commit changes to config variables to disk? [no]
Cache size for build directory (in MB)? [100]
Let the index expire after how many days? [1]

Perform cache scanning (atstart or never)? [atstart]
Cache metadata (yes/no)? [yes]
Policy on building prerequisites (follow, ask or ignore)? [ask]

Parameters for the 'perl Makefile.PL' command? []
Parameters for the 'perl Build.PL' command? []

Your ftp_proxy? []
Your http_proxy? []
Your no_proxy? []
Is it OK to try to connect to the Internet? [yes]

First, pick a nearby continent and country by typing in the number(s)
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5

(1) Bahamas
(2) Canada
(3) Mexico
(4) United States
Select your country (or several nearby countries) [] 4

(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan-du.viaverio.com/pub/CPAN/
(4) ftp://cpan-sj.viaverio.com/pub/CPAN/
(5) ftp://cpan.calvin.edu/pub/CPAN
(6) ftp://cpan.cs.utah.edu/pub/CPAN/
e.g. '1 4 5' or '7 1-4 8' [] 2-16

cpan[1]> o conf commit
commit: wrote '/usr/lib/perl5/5.10.0/CPAN/Config.pm'

cpan[2]> quit
No history written (no histfile specified).
Lockfile removed.

• Install Perl Modules using CPAN

Hey smile please, now you are ready with CPAN and can download modules in one line command.

You can use one of the following method to install a Perl module using cpan:

# perl -MCPAN -e 'install Bundle::BioPerl'

(or)

# cpan
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)

cpan[1]> install "Bundle::BioPerl"

In the example above, CPAN will check for Bundle::BioPerl dependencies and automatically resolves and installs Bundle::BioPerl with all the dependent Perl modules.

• Quick Ways

Oh, look at your face.. smily hmm :). This is what your are looking for, a quick and best way to install Perl modules, Bioperl. Following are the the steps to download BioPerl in your server/computer.

# sudo apt-cache search perl BioPerl

Output will be like as follows:

bioperl - Perl tools for computational molecular biology
bioperl-run - BioPerl wrappers: scripts
libbio-perl-perl - BioPerl core perl modules
libbio-perl-run-perl - BioPerl wrappers: modules
libbio-samtools-perl - Perl interface to SamTools library for DNA sequencing
libbiojava-java - Java API to biological data and applications (default version)
libbiojava3-java - Java API to biological data and applications (default version)
python-biopython-sql - Biopython support for the BioSQL database schema
libbtlib-perl - library for basic sequence manipulation

# sudo apt-get install bioperl

If it is installed then flash the following message:

Reading package lists... Done
Building dependency tree      
Reading state information... Done
bioperl is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.

In it is found not installed in your server or system them install all with dependencies.

You can use the same approach to install all the modules, and packages if required.

Thanks for reading. Best of luck for your research.

Faculty of Science

Essential Qualifications:

(i) Good academic record having at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master’s Degree level in a relevant subject, from an Indian University, or an equivalent degree from an accredited foreign University.

(II) Besides fulfilling the above qualifications, the candidates must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/SET.

(III) Notwithstanding anything contained in sub-clauses (i) and (ii) of clause 4.4.1 of UGC regulations 2010, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/ SLET/ SET for engagement of guest Teacher.

(IV) NET/ SLET/ SET shall also not be required for such Master’s Degree Programmes in discipline for which NET/ SLET/ SET is not conducted.

Application form along with detailed instructions can be downloaded from Tripura University website: www.tripurauniv.in. The duly filled in application forms complete in all respects may be sent so as to reach the Office of the Deputy Registrar Academic Branch, Tripura University, Suryamaninagar - 799022, Tripura on or before 31st July, 2014. The Candidates who responded against advertisement No. TU.REG/N-Advt./02/10 dated 20.02.2014 need not apply again.

For more info visit: http://www.tripurauniv.in/images/universitymedia/EmploymentNotification/Guest%20Teacher%20Advt.%20website_09072014.pdf