<![CDATA[BOL: Related items]]> https://bioinformaticsonline.com/related/32376?offset=520 https://bioinformaticsonline.com/file/view/989/bioinformatics-approach-to-boar-taint Wed, 17 Jul 2013 15:50:37 -0500 https://bioinformaticsonline.com/file/view/989/bioinformatics-approach-to-boar-taint <![CDATA[Bioinformatics approach to Boar Taint]]> Meat products obtained from intact male pigs often produce offensive smell or odour which is recognized as a complex genetic trait called boar taint.Androstenone and Skatole in the fat primarily cause boar taint. Metabolism of androstenone and sex steroids share a common pathway which makes removal of boar taint a very challenging task. Castration is a traditional solution to remove boar taint but it also results in bad quality of meat due to low level of steroids which is objectionable to many consumers. Detected functional variant(s) underlying boar taint compounds can be used as genetic markers in selection of male pigs with reduced boar taint levels. Resequencing of a total of 47 samples belong to Norwegian Landrace (NL) and Duroc (D) pigs with varied boar taint levels were done in Illumina HiSeq2000 to >10X average coverage. Short reads generated from these samples mapped to Sus Scrofa version 10.2 reference assembly using Bowtie2. Alignment file then used for calling SNPs and InDels inside previousy identified QTL regions on SSC5,13, and 7 with the aid of FreeBayes , a variant caller tool. A final list of SNPs was prepared after filtering SNPs on the basis of SNP quality, coverage of SNP allele, functional and structural annotation, and repeats, etc. Selected SNPs will be genotyped in sample population for validation and then used for constructing SNPs haplotypes in close linkage disequilibrium with QTLs and fine mapping of QTLs through association mapping of genotyped SNPs. 

 

]]> Rahul Agarwal https://bioinformaticsonline.com/bookmarks/view/10925/a-brief-bioinformatics-tutorial Wed, 21 May 2014 12:50:09 -0500 https://bioinformaticsonline.com/bookmarks/view/10925/a-brief-bioinformatics-tutorial <![CDATA[A Brief Bioinformatics Tutorial]]> This is about how to use a computer to find what is known about a gene of interest and also how to get new insights about it.

The tutorial is divided in three main parts:

  • In the Sequence part, you will see how to look efficiently for a particular protein sequence, how to blast it against the database of your choice to find homologues, how to perform a multiple alignment of the homologues you've selected and how to edit this alignment.
  • The Structure part is about molecular visualization, homology modeling and structural domain prediction.
  • In the Function part, you will be introduced to you 3 useful servers to investigate the function of a protein. i.e. finding interactors, co-expressed genes, see a phylogenetic profile, easily access papers citing your gene etc ...

During all the three parts, we will use the S. cerevisiae VPS36 protein as an example.

Address of the bookmark: http://www.mrc-lmb.cam.ac.uk/rlw/text/bioinfo_tuto/introduction.html

]]> Jit https://bioinformaticsonline.com/news/view/4183/320000-viruses-in-mammals-yet-to-sequenced-in-future Tue, 03 Sep 2013 08:35:30 -0500 https://bioinformaticsonline.com/news/view/4183/320000-viruses-in-mammals-yet-to-sequenced-in-future <![CDATA[320000 viruses in mammals yet to sequenced in future!!!]]> With current biological technique improvements, finally it is now possible to look at millions of unknown viruses at genomic level and understand the mechanism. According to available data, close to 70 per cent of emerging viral diseases such as HIV/AIDS, West Nile, Ebola, SARS, and influenza, are zoonoses - infections of animals that cross into humans.

To address the challenges of describing and estimating virodiversity, a team of investigators from Center for Infection and Immunity (CII) and EcoHealth Alliance began in jungles of Bangladesh - home to the flying fox.

Reference:

http://economictimes.indiatimes.com/news/news-by-industry/et-cetera/mammals-harbour-at-least-320000-new-viruses/articleshow/22253268.cms

http://www.bbc.co.uk/news/science-environment-23932400

]]> Rahul Agarwal https://bioinformaticsonline.com/opportunity/view/11035/bioinformatics-jrfsrf-position-at-nii Sun, 25 May 2014 16:54:04 -0500 <![CDATA[Bioinformatics JRF/SRF position at NII]]> NATIONAL INSTITUTE OF IMMUNOLOGY, NEW DELHI-110067

Applications are invited for the position of Senior Research Fellow for the following time-bound sponsored project as per the details given below:

1. BTIS project on, “Bioinformatics Center-National Infrastructural Facility in the Area of Immunology” funded by DBT

Senior Research Fellow (P) (One Position only)

Dr. Debasisa Mohanty
Staff Scientist-VI
deb@nii.res.in

Qualifications: M.Sc in Biological Sciences or Biotechnology with at least 04 years of Research experience in Bioinformatics or computational Biology after the master’s degree is essential.

Emoluments: The selected candidates will draw consolidated emoluments as per Institute Rules, depending upon qualifications & experience

Rs. 18,000/- per month consolidated plus 30% HRA if Leading to Ph.D/NET/GATE Qualified otherwise Rs. 14,000/- per month + 30% HRA.

Job description: The candidate should be well versed in programming in PERL/C++/HTML/CGI, web server and portal development, computational analysis of
protein structure & function, molecular dynamics simulations and use of high performance computing systems.

GENERAL TERMS AND CONDITIONS:-

1. The candidates selected for the above posts will be on contract for one year or duration of the project whichever is shorter, at a time.
2. No hostel/ housing facility will be provided.
3. Number of posts may vary and shall be need based. Advertisement is no commitment.
4. Applicants may clearly mention the category they belong to i.e. SC/ST/OBC/PH and attach documentary proof of the same.
5. No TA/DA will be paid for attending the interview, if called for.
6. Apart from sending application in the prescribed format given below, candidates should send complete Curriculum Vitae along with the names of three referees. Curriculum Vitae should contain details of the experimental expertise.

HOW TO APPLY Interested candidates may apply directly, STRICTLY IN THE PRESCRIBED FORMAT GIVEN BELOW, through e-mail, to the Investigator of the project, clearly indicating the name of the project along with their complete C.V., e-mail id, fax numbers, telephone numbers. Only Short listed candidates will be called for interview and they required to submit attested copies of all their certificates and a Demand Draft of Rs 100/- drawn on Canara Bank or Indian Bank payable at Delhi/New Delhi in favour of the Director, NII (SC / ST and PH candidates are exempted subject to submission of documentary proof), at the time of interview.

LAST DATE OF RECEIPT OF APPLICATIONS: 06th June, 2014

Advertisement

www1.nii.res.in/sites/default/files/projectappointment-Dr.Mohanty-6June2014.pdf

]]> https://bioinformaticsonline.com/news/view/4590/tigers-genome-sequenced Tue, 17 Sep 2013 16:48:24 -0500 https://bioinformaticsonline.com/news/view/4590/tigers-genome-sequenced <![CDATA[Tigers genome sequenced]]> Fifteen scientists led by Dr Jong Bhak of Genome Research Foundation, South Korea, decoded as many as 3 billion nucleotides (organic molecules that form the basic building blocks of nucleic acids, such as DNA). They identified 20,000 genes related to various functions of the tiger. 

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

]]> Rahul Agarwal https://bioinformaticsonline.com/opportunity/view/13014/bioinformatics-jrf-vacancy-at-icgeb-new-delhi Wed, 23 Jul 2014 16:07:15 -0500 <![CDATA[Bioinformatics JRF vacancy at ICGEB, New Delhi]]> Junior Research Fellow for a DBT sponsored project entitled "Computational and experimental characterization of stage specific arginine methylation in P. falciparum proteome".

Candidates should have a 1st class MSc/MTech/BTech degree in Bioinformatics. Please send complete CV, quoting Application for RMETH-JRF-2014, by email to Dr. Dinesh Gupta: dinesh@icgeb.res.in

Closing date for applications: 6 August 2014

More at http://www.icgeb.org/tl_files/Vacancies/JRF.pdf

]]> https://bioinformaticsonline.com/pages/view/11313/linux-sort-commands-for-bioinformatics Sat, 31 May 2014 15:41:16 -0500 https://bioinformaticsonline.com/pages/view/11313/linux-sort-commands-for-bioinformatics <![CDATA[Linux Sort Commands for Bioinformatics]]> Almost all the scripting languages such as Perl, Python etc have built-in sort, but unfortunately none of them are as flexible as sort command. But one when it come to space efficiency GNU sort stands at the top. It can sort a 20Gb file with less than 2Gb memory. It is not trivial to implement so powerful a sort by yourself.

sort a space-delimited file based on its first column, then the second if the first is the same, and so on:
sort input.txt

sort a huge file (GNU sort ONLY):
sort -S 1500M -t $HOME/tmp input.txt > sorted.txt

sort starting from the third column, skipping the first two columns:
sort +2 input.txt

sort the second column as numbers, descending order; if identical, sort the 3rd as strings, ascending order:
sort -k2,2nr -k3,3 input.txt

sort starting from the 4th character at column 2, as numbers:
sort -k2.4n input.txt

More Linxu sort command information

If you have any sort commands you'd like to share, please add them to our comments section below. For more help, you can also type:

man sort

or

sort --help

on your Unix/Linux system.

]]> Rahul Nayak https://bioinformaticsonline.com/blog/view/33874/dna-testing-companies-around-the-globe Thu, 13 Jul 2017 04:44:03 -0500 https://bioinformaticsonline.com/blog/view/33874/dna-testing-companies-around-the-globe <![CDATA[DNA testing companies around the globe !]]> It was realized in the 1940s that DNA molecules are passed down through the generations of a family. In 1953 Watson and Crick elucidated the chemical structure of this molecule as a twisted ladder (a ‘helix’) made of two strands. DNA occurs in all the cells of our body, it is our blueprint! The strands of DNA contain information in the form of a code, which in turn determines our individual traits and characteristics. This code, the genetic code, is the order of four types of DNA building block. When the two strands of DNA separate, each building block (‘base’) accurately templates a corresponding base on the newly made strand of DNA so that information is not lost but is instead duplicated and preserved.

Testing for similarities between DNA (deoxyribonucleic acid) samples from two people allows family relationships to be established – or disproved – to an extraordinarily high degree of certainty. A common use for a DNA test is to establish if a man is the biological father of a child; this is known as a paternity test. However, there are other uses for the science of DNA testing (also called genotyping), these include forensic analysis of human DNA samples, and tracking relationships amongst domesticated animals.

The order in which the bases occur in DNA is referred to as the DNA sequence. Each person is unique and just as people differ in their fingerprints, they also have a unique and slightly different DNA sequence. Half of a person’s DNA is received from their mother, and half is received from the father. However, while fingerprints have no value for establishing family relationships, the minor variations in DNA sequence are extraordinarily useful for this purpose. All cells of our body contain DNA, skin cells from the lining of the cheek provide a simple and convenient source of material.

DNA is purified from these cells and the minor variations are read out as a type of bar-code by a machine. When the net DNA ‘barcodes’ from family members are lined up next to each other it becomes clear when a child is related to biological parents because half the stripes in the bar-code like signature will line up with those of the mother, and half will line up with those of the father. On the other hand, in the absence of a biological relationship, the DNA signatures from a child and from a potential parent are not found to have 50% in common. It may be appreciated that DNA testing is the most convenient and scientifically accurate method of determining relationships between people.

Following are the list of companies who qssist in DNA testing:

DNA testing companies

]]> Jit https://bioinformaticsonline.com/pages/view/11399/next-generation-sequencing-in-r-or-bioconductor-environment Mon, 02 Jun 2014 18:03:09 -0500 https://bioinformaticsonline.com/pages/view/11399/next-generation-sequencing-in-r-or-bioconductor-environment <![CDATA[Next generation sequencing in R or bioconductor environment]]> There are many R software and bioconductor packages for NGS data analysis, some of them are as follows

Biostrings

The Biostrings package from Bioconductor provides an advanced environment for efficient sequence management and analysis in R. It contains many speed and memory effective string containers, string matching algorithms, and other utilities, for fast manipulation of large sets of biological sequences. The objects and functions provided by Biostrings form the basis for many other sequence analysis packages. Documentation

IRanges Overview

IRanges provides the low-level infrastructure and containers for handling sets of integer ranges within Bioconductor's BioC-Seq domain. Its classes and methods provide support for many more high-level packages like GenomicRanges, ShortRead, Rsamtools, etc. Documentation

GenomicRanges Overview

The GenomicRanges package serves as the foundation for representing genomic locations within the Bioconductor project. It is built upon the IRanges infrastructure and defines three major data containers - GRanges, GRangesList and GappedAlignments - which are supporting other important BioC-Seq packages including ShortRead, Rsamtools, rtracklayer, GenomicFeatures and BSgenome.  Compared to the IRanges container, the GRanges/GRangesList classes are more flexible and extensible to store additional information about sequence ranges, such as chromosome identifiers (sequence space), strand information and annotation data. Documentation

Motif Discovery

cosmo

The cosmo package allows to search a set of unaligned DNA sequences for a shared motif that may function as transcription factor binding site. The algorithm extends the popular motif discovery tool MEME (Bailey and Elkan, 1995) in that it allows the search to be supervised by specifying a set of constraints that the motif to be discovered must satisfy. Documentation

BCRANK

BCRANK is a method that takes a ranked list of genomic regions as input and outputs short DNA sequences that are overrepresented in some part of the list. The algorithm was developed for detecting transcription factor (TF) binding sites in a large number of enriched regions from high-throughput ChIP-chip or ChIP-seq experiments, but it can be applied to any ranked list of DNA sequences. Documentation

rGADEM: Documentation

MotIV: Documentation

ShortRead

The ShortRead package provides input, quality control, filtering, parsing, and manipulation functionality for short read sequences produced by high throughput sequencing technologies. While support is provided for many sequencing technologies, this package is primairly focused on Solexa/Illumina reads. Documentation

Rsamtools

Rsamtools provides functions for parsing and inspecting samtools BAM formatted binary alignment data. SAM/BAM is quickly becoming a universal standard alignment format, and is now supported by a wide variety of alignment tools. Documentation

Samtools Website
BWA (Burrows-Wheeler Alignment) Website

 

Additional tools for SNP analysis: 

snpMatrix

BSgenome

BSgenome provides an object oriented infrastructure for interacting with a Biostring based genome sequence. BSgenome packages exist for many common genomes, and can be created to represent custom genomes. See the "How to forge a BSgenome data package" Vignette for instructions to create a new BSgenome package if a prebuilt package does not exist for your organism. Documentation

rtracklayer

rtracklayer provides an interface for exporting annotation feature data to various genome browsers and file formats (such as GFF). See the Small RNA Profiling exercise for an example of using rtracklayer to visualize alignment coverage. Documentation

biomaRt

The biomaRt package, provides an interface to a growing collection of databases implementing the BioMart software suite (http:// www.biomart.org). The package enables online retrieval of large amounts of data in a uniform way without the need to know the underlying database schemas. This data is retrieved automatically via the Internet, so it's recommended that you cache the data locally, or check versions if your code will be adversely affected by updates to these data. Documentation

ChIP-Seq Analysis Packages

Bioconductor provides various packages for analyzing and visualizing ChIP-Seq data. Only a small selection of these packages is introduced here. Additional useful introductions to this topic are: BioC ChIP-seq Case Study and BioC ChIP-Seq.

chipseq

The chipseq package combines a variety of HT-Seq packages to a pipeline for ChIP-Seq data analysis. Documentation

BayesPeak

BayesPeak is a peak calling package for identifying DNA binding sites of proteins in ChIP-Seq experiments. Its algorithm uses hidden Markov models (HMM) and Bayesian statistical methods. The following sample code introduces the identification of peaks with the BayesPeak package as well as the incorporation of read coverage information obtained by the chipseq package. Documentation [ Publication ]

PICS

The PICS package applies probabilistic inference to aligned-read ChIP-Seq data in order to identify regions bound by transcription factors. PICS identifies enriched regions by modeling local concentrations of directional reads, and uses DNA fragment length prior information to discriminate closely adjacent binding events via a Bayesian hierarchical t-mixture model. The following sample code uses the test data set from the above BayesPeak package in order to compare the results from both methods by identifying their consensus peak set. Documentation [ Publication ]

ChIPpeakAnno

The ChIPpeakAnno package provides. batch annotation of the peaks identified from either ChIP-seq or ChIP-chip experiments. It includes functions to retrieve the sequences around peaks, obtain enriched Gene Ontology (GO) terms, find the nearest gene, exon, miRNA or custom features such as most conserved elements and other transcription factor binding sites supplied by users. The package leverages the biomaRt, IRanges, Biostrings, BSgenome, GO.db, multtest and stat packages. Documentation

Additional ChIP-Seq Packages

DiffBind: Documentation

MOSAICS: Documentation

iSeq: Documentation

ChIPseqR: Documentation

ChiPsim: Documentation

CSAR: Documentation

ChIP-Seq Pipeline: PICS, rGADEM and MotIV (developer web site)

SPP: ChIP-seq processing pipeline

SPP Tutorial

MACS

SIPeS

RNA-Seq Analysis

Counting Reads that Overlap with Annotation Ranges 

The GenomicRanges package provides support for importing into R short read alignment data in BAM format (via Rsamtools) and associating them with genomic feature ranges, such as exons or genes. This way one can quantify the number of reads aligning to annotated genomic regions. The package defines general purpose containers for storing genomic intervals as well as more specialized containers for storing alignments against a reference genome. The two main functions for read counting provided by this infrastructure are countOverlaps and summarizeOverlaps. For their proper usage, it is important to read the corresponding PDF manual. Documentation

Differential Gene Expression Analysis with DESeq

The DESeq package contains functions to call differentially expressed genes (DEGs) in count tables based on a model using the negative binomial distribution. It expects as input a data frame with the raw read counts per region/gene of interest (rows) for each test sample (columns).  Such a count table can be imported into R or generated from BAM alignment files using the countOverlaps function as introduced above. Documentation

Differential Gene Expression Analysis with edgeR

The edgeR package uses empirical Bayes estimation and exact tests based on the negative binomial distribution to call differentially expressed genes (DEGs) in count data. 

Documentation

A variety of additional R packages are available for normalizing RNA-Seq read count data and identifying differentially expressed genes (DEG):

easyRNASeq (simplifies read counting per genome feature)

DEXSeq (Inference of differential exon usage); parathyroidSE explains how to generate exon read counts in R

DEGseq

baySeq (also see: segmentSeq)

Genominator (Bullard et al. 2010)

Detection of Alternative Splice Junctions

Another utility of RNA-Seq experiments is the analysis of splice junctions. The following software suggestions provide this utility:

ERANGE
TopHat

SpliceMap

SplitSeek

DNA-Methylation Data Analysis

HT-Seq Data Visualization

ggbio: ggplot2 extension for genomics data (online manual) Gviz: Plotting data and annotation information along genomic coordinates HilbertVis: Hilbert genome plots

GenomeGraphs: Plotting genomic information from Ensembl

TileQC: Flow Cell Quality Visualization

rtracklayer: R interface to genome browsers

genoPlotR: Plotting maps of genes and genomes

Genominator: Tools for storing, accessing, analyzing and visualizing genomic data.

 

To install all packages

source("http://bioconductor.org/biocLite.R")
biocLite()
biocLite(c("ShortRead", "Biostrings", "IRanges", "BSgenome", "rtracklayer", "biomaRt", "chipseq", "ChIPpeakAnno", "Rsamtools", "BayesPeak", "PICS", "GenomicRanges", "DESeq", "edgeR", "leeBamViews", "GenomicFeatures", "BSgenome.Celegans.UCSC.ce2"))

]]> John Parker https://bioinformaticsonline.com/bookmarks/view/34914/ra-assembler-a-de-novo-dna-assembler-for-third-generation-sequencing-data Wed, 27 Dec 2017 20:36:54 -0600 https://bioinformaticsonline.com/bookmarks/view/34914/ra-assembler-a-de-novo-dna-assembler-for-third-generation-sequencing-data <![CDATA[Ra assembler - a de novo DNA assembler for third generation sequencing data]]> Integration of the Ra assembler - a de novo DNA assembler for third generation sequencing data developed on Faculty of Electrical Engineering and Computing (FER), Ruder Boskovic Institute (RBI) and Genome Institute of Singapore (GIS).

Ra is in development since 2014 in the form of several separate components that used to be run individually.
This project aims to ease the usage of Ra by integrating it into a complete de novo assembly tool.

Unlike other state-of-the-art assemblers, Ra does not have an error correction step. Instead, it relies on detecting overlaps using a very sensitive and specific overlapper ("graphmap -w owler", https://github.com/isovic/graphmap) and constructing and reducing an overlap graph (Ra layout, https://github.com/mariokostelac/ra).

Address of the bookmark: https://github.com/mariokostelac/ra-integrate/

]]> biogeek