Address of the bookmark: http://huanglab.phys.hust.edu.cn/hnadock/

Walk-in-Interview

Walk-in-interview will be held on February 11, 2014 at 10:00 A.M. at IASRI, New Delhi for a project “Whole Genome Sequencing and Development of Allied Genomics Resources in Two Commercially Important Fish-Labeo rohita and Clarias batrachus” funded by Department of Biotechnology, Ministry of Science and Technology, Government of India, New Delhi for the following posts. The appointment will be on contractual basis upto September, 2016 or till the termination of the project whichever is earlier and the incumbent shall not have any claim for regular appointment under ICAR.

Senior Research Fellow Two

Post-Graduation in Bioinformatics/ Agricultural Statistics/ Statistics/ Computer Science/ Computer Application/ Biotechnology or equivalent with 1st Division

 Knowledge of Statistical Analysis /Bioinformatics tools/computer programming for computational genomics.

Emoluments for Research Associate: Consolidated Rs: 16000/- per month + 30% HRA (1st Two years) and Rs: 18000/- per month + 30% HRA (3rd Year)

Age Limit: Age should be not more than 35 years (5 years relaxation for SC/ST/women candidates and 3 years for OBC candidates as on date of interview).
Interested candidates are requested to appear for Walk-in-Interview on the date and time as specified above in Room No. 106, Training Cum Administrative Block of the Institute along with their application giving bio-data with attested copies of certificates, degrees, testimonials, etc. and one passport size photograph. Original certificates/ Degrees are needed to be produced at the time of interview. No T.A. /D.A. will be paid for appearing in the interview.

Advertisement: http://www.iasri.res.in/employment/2014/srf_cabin.pdf

The following table shows SLURM commands on the SOE cluster.

For more information, run man on the commands above. See some examples below.

1. Info about the partitions and nodes
List all the partitions available to you and the nodes therein:

sinfo

Nodes in state idle can accept new jobs.

Show a partition configuratuin, for example, SOE_main

scontrol show partition=SOE_main

Show current info about a specific node:

scontrol show node=<nodename>

You can also specify a group of nodes in the command above. For example, if your MPI job is running across soenode05,06,35,36, you can execute the command below to get the info on the nodes you are interested in:

scontrol show node=soenode[05-06,35-36]

An informative parameter in the output to look at would be CPULoad. It allows you to see how your application utilizes the CPUs on the running nodes.

2. Submit scripts
The header in a submit script specifies job name, partition (queue), time limit, memory allocation, number of nodes, number of cores, and files to collect standard output and error at run time, for example

#!/bin/bash

#SBATCH --job-name=OMP_run     # job name, "OMP_run"
#SBATCH --partition=SOE_main   # partition (queue)
#SBATCH -t 0-2:00              # time limit: (D-HH:MM) 
#SBATCH --mem=32000            # memory per node in MB 
#SBATCH --nodes=1              # number of nodes
#SBATCH --ntasks-per-node=16   # number of cores
#SBATCH --output=slurm.out     # file to collect standard output
#SBATCH --error=slurm.err      # file to collect standard errors

If the time limit is not specified in the submit script, SLURM will assign the default run time, 3 days. This means the job will be terminated by SLURM in 72 hrs. The maximum allowed run time is two weeks, 14-0:00.
If the memory limit is not requested, SLURM will assign the default 16 GB. The maximum allowed memory per node is 128 GB. To see how much RAM per node your job is using, you can run commands sacct or sstat to query MaxRSS for the job on the node - see examples below.
Depending on a type of application you need to run, the submit script may contain commands to create a temporary space on a computational node - see the discussion about using the file systems on the cluster.
Then it sets the environment specific to the application and starts the application on one or multiple nodes - see sbatch sample scripts in directory /usr/local/Samples on soemaster1.hpc.rutgers.edu.
You can submit your job to the cluster with sbatch command:

sbatch myscript.sh

3. Query job information
List all currently submitted jobs in running and pending states for a user:

squeue -u <username>

Command squeue can be run with format options to expose specific information, for example, when pending job #706 is scheduled to start running:

squeue -j 706 --format="%S"

START_TIME
2015-04-30T09:54:32

More info can be shown by placing additional format options, for example:

squeue -j 706 --format="%i %P %j %u %T %l %C %S"

JOBID PARTITION   NAME    USER STATE   TIMELIMIT  CPUS START_TIME
706   SOE_main  Par_job_3 mike PENDING 3-00:00:00 64   2015-04-30T09:54:32

To see when all the jobs, pending in the queue, are scheduled to start:

squeue --start 

List all running and completed jobs for a user

sqlog -u <username>

or

sqlog -j <JobID>

The following appreviations are used for the job states:

       CA   CANCELLED      Job was cancelled.

       CD   COMPLETED      Job completed normally.

       CG   COMPLETING     Job is in the process of completing.

       F    FAILED         Job termined abnormally.

       NF   NODE_FAIL      Job terminated due to node failure.

       PD   PENDING        Job is pending allocation.

       R    RUNNING        Job currently has an allocation.

       S    SUSPENDED      Job is suspended.

       TO   TIMEOUT        Job terminated upon reaching its time limit.

You can specify the fields you would like to see in the output of sqlog:

sqlog --format=list

The command below, for example, provides Job ID, user name, exit state, start date-time, and end date-time for job #2831:

sqlog -j 2831 --format=jid,user,state,start,end

List status info for a currently running job:

sstat -j <jobid>

A formatted output can be used to gain only a specific info, for example, the maximum resident RAM usage on a node:

sstat --format="JobID,MaxRSS" -j <jobid>

To get statistics on completed jobs by jobID:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -j <jobid>

To view the same information for all jobs of a user:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -u <username>

To print a list of fields that can be specified with the --format option:

sacct --helpformat

For example, to get Job ID, Job name, Exit state, start date-time, and end date-time for job #2831:

sacct -j 2831 --format="JobID,JobName,State,Start,End"

Another useful command to gain information about a running job is scontrol:

scontrol show job=<jobid>

4. Cancel a job
To cancel one job:

scancel <jobid>

To cancel one job and delete the TMP directory created by the submit script on a node:

sdel <jobid>

To cancel all the jobs for a user:

scancel -u <username>

To cancel one or more jobs by name:

scancel --name <myJobName>

Candidates having the below mentioned qualifications may appear for Walk in Interview at ICPO on 5th Feb 2014 between 10.00 AM and 12.00 PM under the NIF project entitled "Prediction of drug tragets of chemical constituents present within non-codified medicinal plants" under Dr Subhash M.Agarwal, Scientist C

Position : JRF
No of Post : One
Pay : Rs 12000/- + 30% HRA

Desired Profile : M.Sc in Bioinformatics with good academic record. Candidate with experience in database development and scripting would be preferred
Age Limit : Below 28 years
Period : 2 months

Interested candidates may send their applications with bio-data by email (smagarwal@gmail.com) or post addressed to Dr Subhash M Agarwal, Scientist C, Bioinformatics Division, Institute of Cytology and Preventive Oncology (ICPO) I-7, Sector 39, Noida-201301 so as to reach latest by 04.02.14

Deadline : 04.02.14

http://icmr.nic.in/icmrnews/icpo_jrf.pdf

To get started using Bokeh to make your visualizations, see the User Guide.

To see examples of how you might use Bokeh with your own data, check out the Gallery.

A complete API reference of Bokeh is at Reference Guide.

If you are interested in contributing to Bokeh, or extending the library, see the Developer Guide.

Address of the bookmark: https://bokeh.pydata.org/en/latest/

* Analysis of Gene Expression Pattern Images: high-performance image analysis and mining for different model organisms, such as fruitfly, C. elegans, and mouse;
* Feature/Model Learning: developing algorithms and software

Location :Janelia Farm Research Campus, Howard Hughes Medical Institute, Ashburn, Virginia, USA.

http://research.janelia.org/peng/

Dash Bio is a suite of bioinformatics components that make it simpler to analyze and visualize bioinformatics data and interact with them in a Dash application.

The source can be found on GitHub at plotly/dash-bio.

These docs are using Dash Bio version 0.1.4.

Address of the bookmark: https://dash.plot.ly/dash-bio

This position will have a significant focus on providing analytical support for next generation sequencing data analysis – Exome-sequencing, Targetted sequencing as well as high-throughput genotyping on Illumina platform.

Job location:

Genome Research Chair
King Saud University, Riyadh-11451
KSA

Interested candidate may forward their CV to grcksu@gmail.com

Pst. hey, you, join our stargazers :)

Address of the bookmark: https://github.com/firecrawl/firecrawl

Required Qualifications: Masters in physics/chemistry/mathematics (or) MTech in bioengineering, chemical (or) Masters in any traditional field of science with outstanding performance throughout the program. Candidate should have cleared GATE/UGC-CSIR examinations. Applicant should have done basic mathematics courses like calculus, differential equations, numerical analysis etc in their degree program and have obtained good grades in those courses. Knowledge of MATLAB and C or at least one traditional programming language is absolutely necessary. Strong inclination to understand biological concepts is a must for this research work as this project is about modeling biological systems.

Salary: A fixed salary of Rs 18000 PM including HRA will be paid.

Last date for application: This advertisement is open until suitable candidate is found for the project.

Preferred Qualifications: - Expertise in dynamical systems theory, bifurcation theory, numerical simulations, parameter estimation.

Independence and high motivation for carrying out interdisciplinary research. - Excellent communication skills and ability to work independently. - Good working habits.

Interested candidates should submit both curriculum vitae and statement of interest in PDF format to sriramk@iiitd.ac.in and should clearly mention in the subject "Application for SRF".