Following are the useful links:

Single Cell RNAseq data analysis Tutorial

A step-by-step workflow for low-level analysis of single-cell RNA-seq data

A step-by-step workflow for low-level analysis of single-cell RNA-seq data with Bioconductor

SCell: single-cell RNA-seq analysis software

https://github.com/diazlab/SCell

Beta-Poisson model for single-cell RNA-seq data analyses

https://github.com/nghiavtr/BPSC

Sincera: A Computational Pipeline for Single Cell RNA-Seq Profiling Analysis

https://research.cchmc.org/pbge/sincera.html

SC3 – consensus clustering of single-cell RNA-Seq data

http://biorxiv.org/content/early/2016/09/02/036558

Citrus: A toolkit for single cell sequencing analysis

http://biorxiv.org/content/early/2016/09/14/045070

Single-Cell Resolution of Temporal Gene Expression during Heart Development

http://www.cell.com/developmental-cell/fulltext/S1534-5807(16)30682-7

Scalable latent-factor models applied to single-cell RNA-seq data separate biological drivers from confounding effects

http://biorxiv.org/content/early/2016/11/15/087775

Single cell transcriptomes identify human islet cell signatures and reveal cell-type-specific expression changes in type 2 diabetes

http://genome.cshlp.org/content/early/2016/11/18/gr.212720.116.abstract

SCODE: An efficient regulatory network inference algorithm from single-cell RNA-Seq during differentiation

http://biorxiv.org/content/early/2016/11/21/088856

SCOUP is a probabilistic model to analyze single-cell expression data during differentiation

https://github.com/hmatsu1226/SCOUP

scLVM is a modelling framework for single-cell RNA-seq data

https://github.com/PMBio/scLVM

Selective Locally linear Inference of Cellular Expression Relationships (SLICER) algorithm for inferring cell trajectories

https://github.com/jw156605/SLICER

SinQC: A Method and Tool to Control Single-cell RNA-seq Data Quality

http://www.morgridge.net/SinQC.html

TSCAN: Pseudo-time reconstruction and evaluation in single-cell RNA-seq analysis

https://github.com/zji90/TSCAN

Visualization and cellular hierarchy inference of single-cell data using SPADE

http://www.nature.com/nprot/journal/v11/n7/full/nprot.2016.066.html

OEFinder: Identify ordering effect genes in single cell RNA-seq data

https://github.com/lengning/OEFinder

A qualified candidate should hold a Ph.D. in a relevant field including
Agronomy, Statistics, Bioinformatics, Plant Breeding, Plant Genetics or
Quantitative Genetics. For the position in Biometry and Bioinformatics, the
applicants capable of teaching fundamental statistics/bioinformatics
courses or with experience in crop science are preferable; for Plant
Breeding and Genetics, the applicants capable of teaching fundamental plant
breeding courses, with experience in crop breeding, or training in
quantitative genetics are preferred.

The application package should include two letters of reference and five
printed copies of the following documents (1) curriculum vitae, (2)
publication list, (3) undergraduate and graduate transcripts if applying
for the Assistant Professorship, (4) a photocopy of the Ph.D. diploma, (5)
teaching plan and course outline or syllabus (6) research proposal, (7) a
cover letter indicating the rank to apply, and one representative original
research article which was published by the applicant being the 1st or
corresponding author in an SCI peer-reviewed journal within 5 years (after
August 1, 2016); a copy of doctoral dissertation can be the representative
article if applying for the Assistant Professorship; (8) reprints of the
selected publications published within 7 years (after August 1, 2014).

The application package should mail to the Chair, Dr. Li-yu Daisy Liu
(lyliu@ntu.edu.tw), in the Department of Agronomy, National Taiwan
University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan, before
December 15, 2020 for full consideration.

https://github.com/zhangzhwlab/delta

Address of the bookmark: https://github.com/zhangzhwlab/delta

The impact of non tree-like evolution such as horizontal gene transfers and hybridization on species biology
Evolution and adaptation of animals in the absence of sexual reproduction and the underlying mechanisms
Genomic signatures of adaptation to a parasitic life-style

More at https://edanchin.org/

1. Supply your genes/genomic segments/phylogenetic tree of interest in the input-box by
   • selecting the type of identifier and pasting identifiers (one per line)
   • or by using the gene ID search tool
   • or with the BLAST search tool
2. Click "Visualize context".

Consult the documentation to learn more about MGcV.

Address of the bookmark: http://mgcv.cmbi.ru.nl/

Xiaole Shirley Liu (lead instructor)
Joshua Starmer
Martin Hemberg
Ting Wang
Feng Yue

Ming Tang
Yang Liu
Jack Kang
Scarlett Ge
Jiazhen Rong
Phillip Nicol
Maartin De Vries

We thank many colleagues in the community, who helped Dr. Liu in prepare the STAT115/215 BIO/BST282 course over the years. 

Address of the bookmark: https://liulab-dfci.github.io/bioinfo-combio/

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

Under   a   NEPAD   initiative,   the   Biosciences   Eastern   and   Central   Africa   (BECA)  (www.biosciencesafrica.org) was established at ILRI. BECA consists of a hub, regional nodes, and  other affiliated laboratories and partner institutes. A state of the art joint Bioinformatics Platform  (www.becabioinfo.org), whose overall goal is to provide a coherent and powerful bioinformatics  infrastructure for use by all scientists in East and central Africa. The Platform goal requires both  physical and intellectual developments that together provide researchers with access to diverse  infrastructure in a wide­area network, thereby addressing four important aspects of bioinformatics: 

1) Science: bioinformatics tools for data integration and visualization, standardization of data  formats and data analysis strategies, and distribution of analysis tasks over local­ and widearea networks are in development; 

2)  Bioinformatics Support Facility: provides assistance and custom programming to projects  and those unable to establish a bioinformatics support function intrinsic to their project due  to shortage of qualified personnel or lack of funding; 

3) Hardware Platform: provide a powerful high performance computing platform capable of  handling the largest analysis needs for projects; 

4) Bioinformatics Training for East and central African scientists: While many Web­based  tools are available to the wet­lab researcher, the Web is not well suited for tasks beyond  single­sequence annotation. Researchers need to become productive in a server­based Unix  environment with its wealth of scripting and automation tools. Even at an entry­level, this  can be an intimidating task if proper guidance is not available.

International Centre of Insect Physiology and Ecology (ICIPE): ICIPE’s research focus is on insect biology, in order to improve the wellbeing of the peoples of the  tropics through insect science. There is a commitment to utilise contemporary science in order to  limit the impact of disease vectors, and agricultural pests. The understanding of the mechanisms  associated with behaviour (e.g. attraction and repellency) is crucial. ICIPE seeks to enhance its  bioinformatics capacity in order to support data from various EST projects designed to gain insights  into the insect ecology and plant pathogen interactions though studies of metabolic pathways  associated with production of all elochemicals. 

Long­term training activities:

Kenyatta University: An introductory course in Bioinformatics is offers to MSc Biotechnology  students. This comprises of 35 hours of lectures and practicals.

University of Nairobi: A centre for Biotechnology and Bioinformatics (CEBIB), which will offer  postgraduate training (diplomas, MSc and PhD) in areas of biotechnology and bioinformatics has  recently been launched. Other universities in Kenya, including Egerton, Maseno and the Jomo Kenyatta University of  Agriculture and Technology offer introductory courses to undergraduates in biomedical sciences. In addition, under the BECA platform MSc and PhD fellowships are being made available for  Bioinformatics students. ILRI is forging links with Universities in South Africa and the United  Kingdom to provide access to courses and training material. 

Research Interest and Activities:

The following are the present areas of research interest: 1. EST clustering 2. Genome sequencing and annotation 3. Functional genomics and proteomics (including key tropical pathogens) 4. Structural bioinformatics 5. Development of Bioinformatics Data Management Systems 6. Gene Mining 7. High Throughput Genotyping 8. Microarray data management and analysis 9. Metagenomics 10. Immunoinformatics 11. Host­pathogen interaction 12. High performance computing and grid development 13. Parasite transfection technologies 14. Cell cycle regulation 15. Population genetics 16. Vector genomics 17. Drug, vaccine and diagnostic target discovery

More at Web site and links:

http://www.ilri.cgiar.org/

http://www.icipe.org/    

http://www.uonbi.ac.ke/cebib

Centre de Biotechnology de Sfax (CBS):
Bioinformatics activity started at CBS in 2001 with the setting­up of a research and service unit of  bioinformatics. This unit currently includes one senior researcher, one engineer and four Phd  students. Activities include sequence annotation (service) and three research programs: ab initio  prediction of short eukaryote genes, statistical modelling by Bayesian networks approach of signal  transduction pathways and statistical analysis of human sequence variation data (haplotype  reconstruction and linkage disequilibrium). Activities of the Bioinformatics unit could be found at  the website: http://www.cbs.rnrt.tn/ and the research activity report is available under request to  Bioinformatics@cbs.rnrt.tn. Although the computing facilities are good, there is still a need for  trained human resources to strengthen bioinformatics capacities at CBS, particularly in structural  bioinformatics.

Web site and links: http://www.cbs.rnrt.tn

Juicebox can now be used to visualize and interactively (re)assemble genomes. Check out the Juicebox Assembly Tools Module website https://aidenlab.org/assembly for more details on how to use Juicebox for assembly.

GUI at https://aidenlab.org/juicebox/

Address of the bookmark: https://github.com/aidenlab/Juicebox