Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

1. Prepare a reference sequence (ref.fasta). Better a bacterial genome.
2. Download maq, maq-data and maqview at the download page.
3. Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
4. Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:

   maq.pl demo ref.fasta calib-30.dat
   

   where calib-30.dat is contained in maq-data.
5. View the alignment:

   cd maqdemo/easyrun;
   maqindex -i -c consensus.cns all.map;
   maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link 

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link 

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link 

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link 

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link 

TIGER, transduction inference in germline genomes using short read data Link 

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data 

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....) 

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4.  BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin

y a number of metrics, including:

• Overall assembly length
• Number of scaffolds/contigs
• Length of longest scaffold/contig
• Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
• CEGMA completeness
• Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

This script has been modified by others to convert InDels as well, e.g. this by David Eccles

./vcf2fq.pl -f <input.fasta> <all-site.vcf> > <output.fastq>

https://github.com/gringer/bioinfscripts/blob/master/vcf2fq.pl

https://github.com/lh3/samtools/blob/master/bcftools/vcfutils.pl

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/sockeye/releases/1.3

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

 Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/

Source code for SKESA is freely available at https://github.com/ncbi/SKESA/releases.

Research Paper @ Link

SKESA algorithm are as follows:

Address of the bookmark: https://github.com/ncbi/SKESA/releases

QUAST-LG is included in the QUAST  package starting from version 5.0.0 (download the latest release). Run QUAST as usual and do not forget to add ‐‐large option to your command!

A short list of the new features (see CHANGES for all):

• Significant speedup achieved by both use of new fast aligner (minimap2) and the refactoring of alignment analyzing modules
• New k-mer-based completeness and correctness metrics
• BUSCO added for enhanced reference-free analysis
• The concept of upper bound assembly (theoretical limits on the assembly completeness and contiguity for a given genome and set of reads)

Address of the bookmark: http://cab.spbu.ru/software/quast-lg/