BOL: Related items

Supernova: generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Jit — Sun, 31 May 2020 01:59:30 -0500

Supernova generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

RA Bioinformatics at School of Computational & Integrative Sciences, JNU, India

Fri, 18 Nov 2016 03:57:56 -0600

School of Computational & Integrative Sciences
Jawaharlal Nehru University
New Delhi – 110067

Date: Nov 11th. 2016 Last Date: Nov 25th. 2016

PROJECT ID: 632

The following posts are urgently required to be filled for the Department of Biotechnology, Government of India funded project entitled "Computational Core for Plant Metabolomics" administrated by Prof Indira Ghosh, School of Computational and Integrative Sciences, Jawaharlal Nehru University, New Delhi-110 067

NB:For all Bioinformatics posts, preference will be given to candidates with a good knowledge of Python and/or R. Knowledge of JAVA will also get a special consideration.

RA / Research Associate (Metabolic engineering/Computational Biologist)

Salary: Rs. 36000/- + HRA
Vacancy: 1
Essential Qualifications: PhD in Bioinformatics /Mathematics/Computer Science with experience in analyzing high throughput omics-based data/ system Biology/ Analysis of Network Biology. Published paper in the field is a must to prove the experience.
Desired Skills: Prior experience in handling and guiding bioinformatics, metabolomics data, planning of new research area in metabolic driven network , managing the project portal, preparing and filing reports etc. Will be expected to communicate with user groups and coordinate with LIMS group in Hyderabad and the Cheminformatics group in Delhi.

RA / Research Associate (Chemo-informatics/Computational Biologist)

Salary: Rs. 36000/- + HRA
Vacancy: 1
Essential Qualifications: PhD in Bioinformatics/ computational biology/ Biophysics/Computer Science. Computational and Chemical structure related experience is a necessary qualification proven by paper published and program developed.
Desired Skills: Research experience in Chemical scaffold mapping, in silico Spectral analysis, Biological Database Designing & Integration is required. Individual is responsible to develop methods related to metabolite identification, Testing and refining and integrate LIMS with IIIT Hyderabad and will be expected to communicate with user groups.

Project SRF (Bioinformatics/Programming)

Salary: As per DBT rules
Vacancy: 1
Essential Qualifications: Masters/B Tech in Basic Sciences with at least 2yrs of research experience in Bioinformatics/Computational Biology related to Database /portal building & maintenance ,high throughput data handling and analysis etc. For M.Sc/B.Tec, Published paper in peer-reviewed Journal and for M.Tech, thesis submission in computational biology is a must.

More at http://www.jnu.ac.in/Career/currentjobs.htm

Genome assembly training tutorial at Galaxy !

Jit — Sun, 27 Dec 2020 05:25:45 -0600

In this tutorial we assemble and annotate the genome of E. coli strain C-1. This strain is routinely used in experimental evolution studies involving bacteriophages. For instance, now classic works by Holly Wichman and Jim Bull (Bull 1997, Bull 1998, Wichman 1999) have been performed using this strain and bacteriophage phiX174.

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/assembly/tutorials/unicycler-assembly/tutorial.html

GoJS

Jit — Tue, 22 Nov 2016 08:25:37 -0600

GoJS is a feature-rich JavaScript library for implementing custom interactive diagrams and complex visualizations across modern web browsers and platforms. GoJS makes constructing JavaScript diagrams of complex nodes, links, and groups easy with customizable templates and layouts.

GoJS offers many advanced features for user interactivity such as drag-and-drop, copy-and-paste, in-place text editing, tooltips, context menus, automatic layouts, templates, data binding and models, transactional state and undo management, palettes, overviews, event handlers, commands, and an extensible tool system for custom operations.

GoJS is pure JavaScript, so users get interactivity without requiring round-trips to servers and without plugins. GoJS normally runs completely in the browser, rendering to an HTML5 Canvas element or SVG without any server-side requirements. GoJS does not depend on any JavaScript libraries or frameworks, so it should work with any HTML or JavaScript framework or with no framework at all.

More at http://gojs.net/latest/index.html

Address of the bookmark: http://gojs.net/latest/index.html

IVA: accurate de novo assembly of RNA virus genomes

Neel — Wed, 23 Jun 2021 07:51:59 -0500

IVA (Iterative Virus Assembler) designed specifically for read pairs sequenced at highly variable depth from RNA virus samples. We tested IVA on datasets from 140 sequenced samples from human immunodeficiency virus-1 or influenza-virus-infected people and demonstrated that IVA outperforms all other virus de novo assemblers.

Availability and implementation: The software runs under Linux, has the GPLv3 licence and is freely available from http://sanger-pathogens.github.io/iva

https://pubmed.ncbi.nlm.nih.gov/25725497/

Address of the bookmark: https://github.com/sanger-pathogens/iva

bipype

Jit — Thu, 01 Dec 2016 08:47:38 -0600

Bipype is a very useful program, which prepare a lot of types of bioinformatics analyses. There are three input options: amplicons, WGS (whole genome sequences) and metatranscriptomic data. If amplicons are input data, then bipype does reconstruction and pairs merging. After that biodiversity is searching. There are two types of searching depending on the amplicons types (ITS or 16S). If WGS are chosen, then bipype finds the SA coordinates of the input reads and generates alignments in the SAM format given single-end reads, aligns reads to reference sequence(s). All of these analyses will be shown with Krona program, which allows to show hierarchical data with pie charts.

Address of the bookmark: https://readthedocs.org/projects/bipype/

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

fqtools

Jit — Thu, 08 Dec 2016 09:31:12 -0600

fqtools is a software suite for fast processing of FASTQ files. Various file manipulations are supported. See below for a full list of the subcommands available and a brief description of their purpose. Most of the individual subcommands will take either a single file or a pair of files as input. If no input file is specified, fqtools will attempt to read data from stdin. In this case, it is advisabe to specify the format of the data provided. For subcommands that generate FASTQ data, either a single file or a pair of files will be generated. If no -o argument is provided, single files will be writted to stdout.

Address of the bookmark: https://github.com/alastair-droop/fqtools

auN: a new metric to measure assembly contiguity

Jit — Tue, 02 Aug 2022 01:18:47 -0500

Given a de novo assembly, we often measure the “average” contig length by N50. N50 is neither the real average nor median. It is the length of the contig such that this and longer contigs cover at least 50% of the assembly. A longer N50 indicates better contiguity. We can similarly define Nx such that contigs no shorter than Nx covers x% of the assembly. The Nx curve plots Nx as a function of x, where x is ranged from 0 to 100.

Address of the bookmark: https://lh3.github.io/2020/04/08/a-new-metric-on-assembly-contiguity

BIMA V3: an aligner customized for mate pair library sequencing

Abhimanyu Singh — Wed, 14 Dec 2016 15:20:00 -0600

Summary: Mate pair library sequencing is an effective and economical method for detecting genomic structural variants and chromosomal abnormalities. Unfortunately, the mapping and alignment of mate pair read pairs to a reference genome is a challenging and
time consuming process for most NGS alignment programs. Large insert sizes, introduction of library preparation protocol artifacts (biotin junction reads, paired-end read contamination, chimeras, etc.), and presence of structural variant breakpoints within reads increases mapping and alignment complexity. We describe an algorithm that is up to 20 times faster and 25% more accurate than popular NGS alignment programs when processing mate pair sequencing.
Availability: http://bioinformaticstools.mayo.edu/research/bima/
Contact: vasmatzis.george@mayo.edu

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/02/12/bioinformatics.btu078.full.pdf