BOL: Related items

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

R Graphical Cookbook by Winston Chang

Abhimanyu Singh — Fri, 04 Nov 2016 12:50:30 -0500

R Graphical Cookbook by Winston Chang

A very nice book by Winston Chang for R ethusiast. The R code presented in these pages is the R code actually used to produce the Figures in the book. There will be differences compared to the code chunks shown in the text of the book, but in most cases the differences will be that these pages contain additional code to lay out multiple plots on a single "page".

The code presented for each figure is self-contained, i.e., all code required to produce the figure is included. This means that there is sometimes considerable overlap of code between several figures In some cases, it may be necessary to install an add-on package from CRAN to get the code to run.

More books at http://www.e-reading.club/bookreader.php/137370/C486x_APPb.pdf

BlobToolKit: A toolkit for genome assembly QC

Jit — Fri, 21 Feb 2020 00:17:50 -0600

Filtering raw genomic datasets is essential to avoid chimeric assemblies and to increase the validity of sequence-based biological inference. BlobToolKit extends the BlobTools1/Blobology2 approach to simplify interactive and reproducible filtering.

BlobToolKit is comprised of four components:

BlobToolKit Viewer allows browser-based interactive visualisation and filtering of preliminary or published genomic datasets even for highly fragmented assemblies.
BlobTools2 is a command-line program to convert assemblies and analysis results into datasets that can be further processed using BlobTools2 and/or visualised in the Viewer.
The BlobToolKit Specification features a formal schema and validator for the JSON-based BlobDir format used by BlobTools2 and the Viewer.
The BlobToolKit Pipeline is a configurable Snakemake pipeline that automates all steps from retrieving public datasets through running analyses and generating a BlobDir dataset with BlobTools2, ready for visualisation in the Viewer.

Paper https://www.biorxiv.org/content/10.1101/844852v1.full.pdf

Address of the bookmark: https://blobtoolkit.genomehubs.org/

HiCanu: accurate assembly of segmental duplications, satellites, and allelic variants from high-fidelity long reads

BioStar — Fri, 27 Mar 2020 22:49:31 -0500

HiCanu, a significant modification of the Canu assembler designed to leverage the full potential of HiFi reads via homopolymer compression, overlap-based error correction, and aggressive false overlap filtering.

More at https://www.biorxiv.org/content/10.1101/2020.03.14.992248v3

Address of the bookmark: https://github.com/marbl/canu

fqtools

Jit — Thu, 08 Dec 2016 09:31:12 -0600

fqtools is a software suite for fast processing of FASTQ files. Various file manipulations are supported. See below for a full list of the subcommands available and a brief description of their purpose. Most of the individual subcommands will take either a single file or a pair of files as input. If no input file is specified, fqtools will attempt to read data from stdin. In this case, it is advisabe to specify the format of the data provided. For subcommands that generate FASTQ data, either a single file or a pair of files will be generated. If no -o argument is provided, single files will be writted to stdout.

Address of the bookmark: https://github.com/alastair-droop/fqtools

Progressive Cactus

Jit — Tue, 17 Jan 2017 03:40:06 -0600

v0.0 by Glenn Hickey (hickey@soe.ucsc.edu)

Progressive Cactus is a whole-genome alignment package.

Requirements

git
gcc 4.2 or newer
python 2.7
wget
64bit processor and build environment
150GB+ of memory on at least one machine when aligning mammal-sized genomes; less memory is needed for smaller genomes.
Parasol or SGE for cluster support.
750M disk space

Instructions

IMPORTANT NOTE: Progressive Cactus does not presently support installation into paths that contain spaces. Until this is resolved, you can use a softlink as a workaround: ln -s "path with spaces" "installation path without spaces"

In the parent directory of where you want Progressive Cactus installed:

git clone git://github.com/glennhickey/progressiveCactus.git
cd progressiveCactus
git pull
git submodule update --init
make

It is also convenient to add the location of progressiveCactus/bin to your PATH environment variable. In order to run the included tools (ex hal2maf) in the submodules/ directory structure, first source progressiveCactus/environment to load the installed environment.

If any errors occur during the build process, you are unlikely to be able to use the tool. Please submit a GitHub issue so we can help out: not only will you help yourself, but others who wish to use the tool as well.

Note that all dependencies are also built and included in the submodules/ directory. This increases the size and build time but greatly simplifies installation and version management. The installation does not create or modify any files outside the progressiveCactus/ directory.

Address of the bookmark: https://github.com/glennhickey/progressiveCactus

Cgaln

Jit — Wed, 22 Feb 2017 05:14:15 -0600

Cgaln (Coarse grained alignment) is a program designed to align a pair of whole genomic sequences of not only bacteria but also entire chromosomes of vertebrates on a nominal desktop computer. Cgaln performs an alignment job in two steps, at the block level and then at the nucleotide level. The former "coarse-grained" alignment can explore genomic rearrangements and reduce the regions to be analyzed in the next step. The latter is devoted to detailed alignment within the limited regions found in the first stage. The output of Cgaln is 'glocal' in the sense that rearrangements are taken into consideration while each alignable region is extended as long as possible. Thus, Cgaln is not only fast and memory-efficient, but also can filter noisy outputs without missing the most important homologous segment pairs.

http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/

Address of the bookmark: http://www.iam.u-tokyo.ac.jp/chromosomeinformatics/rnakato/cgaln/

HTSlib

Jit — Wed, 15 Mar 2017 11:38:05 -0500

Samtools is a suite of programs for interacting with high-throughput sequencing data. It consists of three separate repositories:

Samtools: Reading/writing/editing/indexing/viewing SAM/BAM/CRAM format
BCFtools: Reading/writing BCF2/VCF/gVCF files and calling/filtering/summarising SNP and short indel sequence variants
HTSlib: A C library for reading/writing high-throughput sequencing data

Samtools and BCFtools both use HTSlib internally, but these source packages contain their own copies of htslib so they can be built independently.

Address of the bookmark: http://www.htslib.org/

gbtools: Interactive Visualization of Metagenome Bins in R

Jit — Sun, 26 Mar 2017 15:41:31 -0500

We have developed gbtools, a software package that allows users to visualize metagenomic assemblies by plotting coverage (sequencing depth) and GC values of contigs, and also to annotate the plots with taxonomic information. Different sets of annotations, including taxonomic assignments from conserved marker genes or SSU rRNA genes, can be imported simultaneously; users can choose which annotations to plot. Bins can be manually defined from plots, or be imported from third-party binning tools and overlaid onto plots, such that results from different methods can be compared side-by-side. gbtools reports summary statistics of bins including marker gene completeness, and allows the user to add or subtract bins with each other.

Tool at https://github.com/kbseah/genome-bin-tools

Address of the bookmark: http://journal.frontiersin.org/article/10.3389/fmicb.2015.01451/full

Mapping NGS

Abhimanyu Singh — Tue, 02 May 2017 07:58:07 -0500

NGS data are just a bunch of sequences, you have no idea which region in the genome each sequences comes from, which gene it represents...
To know that you have to align the sequences to the reference sequence. The reference sequence is in most cases the full genome sequence but sometimes, a library of EST sequences is used.
In either way, aligning your sequence reads to the reference sequence is called mapping.

The most used mappers of DNA-seq data are BWA and Bowtie for DNA-Seq data and Tophat, STAR or HISAT for RNA-Seq data. Mappers differ in which options they can take in, how fast and how accurate they are. Bowtie is faster than BWA, but looses some sensitivity (does not map an equal amount of reads to the correct position in the genome).

Address of the bookmark: http://wiki.bits.vib.be/index.php/Mapping_of_NGS_data