BOL: Related items

Quick next generation sequencing (NGS) terms definition

Neel — Fri, 09 Jun 2017 04:52:26 -0500

fragment size: the Illumina WGS protocol generates paired-end reads from both ends of longer fragments. The lengths of these fragments are assumed to be sampled from a normal distribution. Therefore, in the absence of structural variants, mapping locations of the paired ends span within an interval [δmin,δmax]. Most (>90%) of paired-end reads are sampled from no-SV regions, therefore the fragment size distribution can be learned empirically for each WGS data set separately.

concordant reads: a read pair is called concordant if they can be mapped to the reference genome as “expected”: (a) mapped to opposing strands where the upstream read is mapped to the forward strand and the downstream read is mapped to the reverse strand2, (b) the distance between ends is between the minimum and maximum expected fragment size.

discordant reads: briefly, any non-concordant read pair is considered discordant. Note that, by definition, the discordant read pairs signal potential SVs. The sequence signature produced by these type of reads is known as read-pair signature.

split reads: a read that can only be mapped to the reference genome by breaking into two sub-reads is called a split-read. These types of reads also indicate a potential SV or a short insertion or deletion (indel).

read depth: number of reads that map within a region of the genome. Overall genome-wide read depth is also referred to as depth of coverage. It is expected that the number of reads that “cover” each base-pair to follow a Poisson distribution. Therefore, if the read depth over a certain region deviates significantly from this distribution, it signals for a potential copy number variation (CNV).

PLAST: A fast, accurate and NGS scalable bank-to-bank sequence similarity search tool

Jit — Fri, 01 Dec 2017 04:10:54 -0600

PLAST is a fast, accurate and NGS scalable bank-to-bank sequence similarity search tool providing significant accelerations of seeds-based heuristic comparison methods, such as the Blast suite of algorithms.

Relying on unique software architecture, PLAST takes full advantage of recent multi-core personal computers without requiring any additional hardware devices.

PLAST stands for Parallel Local Sequence Alignment Search Tool and is was published in BMC Bioinformatics.

PLAST is a general purpose sequence comparison tool providing the following benefits:

PLAST is a high-performance sequence comparison tool designed to compare two sets of sequences (query vs. reference),
Reduces the processing time of sequences comparisons while providing highest quality results,
Contains a fully integrated data filtering engine capable of selecting relevant hits with user-defined criteria (E-Value, identity, coverage, alignment length, etc.),
Does not require any additional hardware, since it is a software solution. It is easy to install, cost-effective, takes full advantage of multi-core processors and uses a small RAM footprint,
Ready to be used on desktop computer, cluster, cloud as well as within distributed system running Hadoop.

https://plast.inria.fr/

Address of the bookmark: https://plast.inria.fr/

Installing Trinity !

Rahul Nayak — Tue, 03 Jul 2018 04:31:15 -0500

Download this https://github.com/trinityrnaseq/trinityrnaseq/releases/tag/Trinity-v2.6.6

➜ cd trinityrnaseq-Trinity-v2.6.6

➜ trinityrnaseq-Trinity-v2.6.6 git:(master) ✗ make
Using gnu compiler for Inchworm and Chrysalis
cd Inchworm && (test -e configure || autoreconf) \
&& sh ./configure --prefix=`pwd` && make install
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for library containing cos... none required
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
make[1]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
Making install in src
make[2]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/src'
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT Fasta_entry.o -MD -MP -MF .deps/Fasta_entry.Tpo -c -o Fasta_entry.o Fasta_entry.cpp
mv -f .deps/Fasta_entry.Tpo .deps/Fasta_entry.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT IRKE_run.o -MD -MP -MF .deps/IRKE_run.Tpo -c -o IRKE_run.o IRKE_run.cpp
mv -f .deps/IRKE_run.Tpo .deps/IRKE_run.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT sequenceUtil.o -MD -MP -MF .deps/sequenceUtil.Tpo -c -o sequenceUtil.o sequenceUtil.cpp
mv -f .deps/sequenceUtil.Tpo .deps/sequenceUtil.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT IRKE.o -MD -MP -MF .deps/IRKE.Tpo -c -o IRKE.o IRKE.cpp
mv -f .deps/IRKE.Tpo .deps/IRKE.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT KmerCounter.o -MD -MP -MF .deps/KmerCounter.Tpo -c -o KmerCounter.o KmerCounter.cpp
mv -f .deps/KmerCounter.Tpo .deps/KmerCounter.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT string_util.o -MD -MP -MF .deps/string_util.Tpo -c -o string_util.o string_util.cpp
mv -f .deps/string_util.Tpo .deps/string_util.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT Fasta_reader.o -MD -MP -MF .deps/Fasta_reader.Tpo -c -o Fasta_reader.o Fasta_reader.cpp
mv -f .deps/Fasta_reader.Tpo .deps/Fasta_reader.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT stacktrace.o -MD -MP -MF .deps/stacktrace.Tpo -c -o stacktrace.o stacktrace.cpp
mv -f .deps/stacktrace.Tpo .deps/stacktrace.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT argProcessor.o -MD -MP -MF .deps/argProcessor.Tpo -c -o argProcessor.o argProcessor.cpp
mv -f .deps/argProcessor.Tpo .deps/argProcessor.Po
g++ -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -o inchworm Fasta_entry.o IRKE_run.o sequenceUtil.o IRKE.o KmerCounter.o string_util.o Fasta_reader.o stacktrace.o argProcessor.o
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT cigar_tweaker.o -MD -MP -MF .deps/cigar_tweaker.Tpo -c -o cigar_tweaker.o cigar_tweaker.cpp
mv -f .deps/cigar_tweaker.Tpo .deps/cigar_tweaker.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT SAM_entry.o -MD -MP -MF .deps/SAM_entry.Tpo -c -o SAM_entry.o SAM_entry.cpp
mv -f .deps/SAM_entry.Tpo .deps/SAM_entry.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT SAM_reader.o -MD -MP -MF .deps/SAM_reader.Tpo -c -o SAM_reader.o SAM_reader.cpp
mv -f .deps/SAM_reader.Tpo .deps/SAM_reader.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT Cigar.o -MD -MP -MF .deps/Cigar.Tpo -c -o Cigar.o Cigar.cpp
mv -f .deps/Cigar.Tpo .deps/Cigar.Po
g++ -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -o cigar_tweaker cigar_tweaker.o SAM_entry.o sequenceUtil.o SAM_reader.o Cigar.o string_util.o stacktrace.o Fasta_reader.o Fasta_entry.o
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT pull_reads_with_kmers.o -MD -MP -MF .deps/pull_reads_with_kmers.Tpo -c -o pull_reads_with_kmers.o pull_reads_with_kmers.cpp
mv -f .deps/pull_reads_with_kmers.Tpo .deps/pull_reads_with_kmers.Po
g++ -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -o pull_reads_with_kmers pull_reads_with_kmers.o Fasta_reader.o Fasta_entry.o sequenceUtil.o KmerCounter.o string_util.o stacktrace.o argProcessor.o
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT FastaToDeBruijn.o -MD -MP -MF .deps/FastaToDeBruijn.Tpo -c -o FastaToDeBruijn.o FastaToDeBruijn.cpp
FastaToDeBruijn.cpp: In function ‘void createGraphPerRecord(std::vector >, int, bool, ArgProcessor)’:
FastaToDeBruijn.cpp:199:39: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (seq_region.size() < kmer_length) { continue; } // can be e
^
mv -f .deps/FastaToDeBruijn.Tpo .deps/FastaToDeBruijn.Po
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT DeBruijnGraph.o -MD -MP -MF .deps/DeBruijnGraph.Tpo -c -o DeBruijnGraph.o DeBruijnGraph.cpp
mv -f .deps/DeBruijnGraph.Tpo .deps/DeBruijnGraph.Po
g++ -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -o FastaToDeBruijn FastaToDeBruijn.o argProcessor.o Fasta_reader.o Fasta_entry.o sequenceUtil.o string_util.o stacktrace.o DeBruijnGraph.o
g++ -DHAVE_CONFIG_H -I. -I.. -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -MT fastaToKmerCoverageStats.o -MD -MP -MF .deps/fastaToKmerCoverageStats.Tpo -c -o fastaToKmerCoverageStats.o fastaToKmerCoverageStats.cpp
fastaToKmerCoverageStats.cpp: In function ‘void populate_kmer_counter_from_reads(KmerCounter&, std::__cxx11::string&)’:
fastaToKmerCoverageStats.cpp:226:18: warning: unused variable ‘kmer_length’ [-Wunused-variable]
unsigned int kmer_length = kcounter.get_kmer_length();
^
mv -f .deps/fastaToKmerCoverageStats.Tpo .deps/fastaToKmerCoverageStats.Po
g++ -std=c++0x -pedantic -fopenmp -Wall -Wextra -Wno-deprecated -m64 -g -O2 -o fastaToKmerCoverageStats fastaToKmerCoverageStats.o argProcessor.o Fasta_reader.o Fasta_entry.o sequenceUtil.o string_util.o stacktrace.o KmerCounter.o
make[3]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/src'
test -z "/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/bin" || /bin/mkdir -p "/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/bin"
/usr/bin/install -c inchworm cigar_tweaker pull_reads_with_kmers FastaToDeBruijn fastaToKmerCoverageStats '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/bin'
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/src'
make[2]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm/src'
make[2]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
make[3]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
make[2]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
make[1]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Inchworm'
cd Chrysalis && make UNSUPPORTED=yes
make[1]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Chrysalis'
./MakeDepend.cc: In member function ‘bool makefile_builder::dependency::operator<(const makefile_builder::dependency&) const’:
./MakeDepend.cc:93:47: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
dependent_ == other.dependent_ &&
^
./MakeDepend.cc: In member function ‘bool makefile_builder::subdir_and_target::operator<(const makefile_builder::subdir_and_target&) const’:
./MakeDepend.cc:130:41: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
subdir_ == other.subdir_ &&
^
./MakeDepend.cc: In function ‘int main(int, char**)’:
./MakeDepend.cc:223:20: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
char * options = "Ad:g:u:fh";
^
./MakeDepend.cc: In member function ‘void makefile_builder::DumpDependencies(const string&)’:
./MakeDepend.cc:491:46: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
if ( ! this->FileIsSource( dependent ) && ! this->FileIsHeader( dependent
^
./MakeDepend.cc:493:44: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
this->FileIsHeader( dependent ) && this->FileIsSource( provider ) )
^
./MakeDepend.cc: In member function ‘bool makefile_builder::FileIsHeader(const string&) const’:
./MakeDepend.cc:1339:32: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
return ( filename.size() > 2 &&
^
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:04 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./aligns/KmerAlignCore.cc -o obj/aligns/KmerAlignCore.o
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:06 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/AACodons.cc -o obj/analysis/AACodons.o
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:09 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/BreakTransByPairs.cc -o obj/analysis/BreakTransByPairs.o
./analysis/BreakTransByPairs.cc: In function ‘int main(int, char**)’:
./analysis/BreakTransByPairs.cc:105:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i > DeBruijnGraph::get_candidate_weldmers(kmer_int_type_t, int)’:
./analysis/DeBruijnGraph.cc:473:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int i = 0; i < left_extensions.size(); i++) {
^
./analysis/DeBruijnGraph.cc:476:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int j = 0; j < right_extensions.size(); j++) {
^
./analysis/DeBruijnGraph.cc: In member function ‘void DeBruijnGraph::recursively_construct_kmer_extensions(kmer_int_type_t, std::vector&, std::vector >&, char, std::map&, int)’:
./analysis/DeBruijnGraph.cc:513:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int i = 0; i < adjacent_kmers.size(); i++) {
^
./analysis/DeBruijnGraph.cc:527:41: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (kmer_extension_chars.size() == flank_extension_length) {
^
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:30 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/sequenceUtil.cc -o obj/analysis/sequenceUtil.o
./analysis/sequenceUtil.cc: In function ‘bool contains_non_gatc(std::__cxx11::string)’:
./analysis/sequenceUtil.cc:33:20: warning: array subscript has type ‘char’ [-Wchar-subscripts]
if (_base_to_int[c] > 3)
^
./analysis/sequenceUtil.cc: In function ‘kmer_int_type_t kmer_to_intval(std::__cxx11::string)’:
./analysis/sequenceUtil.cc:264:26: warning: array subscript has type ‘char’ [-Wchar-subscripts]
int val = _base_to_int[c];
^
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:31 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/stacktrace.cc -o obj/analysis/stacktrace.o
/bin/rm -f lib_BubbleUpClustering_temp.a
ar -qc lib_BubbleUpClustering_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/BubbleUpClustering.o obj/analysis/DNAVector.o obj/analysis/DeBruijnGraph.o obj/analysis/KmerTable.o obj/analysis/NonRedKmerTable.o obj/analysis/sequenceUtil.o obj/analysis/stacktrace.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./BubbleUpClustering
g++ -ggdb3 -fopenmp -o ./BubbleUpClustering obj/analysis/BubbleUpClustering.o -L. -lm -pthread -l_BubbleUpClustering_temp
/bin/rm lib_BubbleUpClustering_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:32 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/Chrysalis.cc -o obj/analysis/Chrysalis.o
./analysis/Chrysalis.cc: In function ‘int main(int, char**)’:
./analysis/Chrysalis.cc:384:28: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result]
system(command.c_str());
^
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:35 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/TranscriptomeGraph.cc -o obj/analysis/TranscriptomeGraph.o
./analysis/TranscriptomeGraph.cc: In function ‘int TranscriptomeGraph(vecDNAVector&, FILE*, int, bool)’:
./analysis/TranscriptomeGraph.cc:668:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i<=d.isize()-k; i++) {
^
/bin/rm -f lib_Chrysalis_temp.a
ar -qc lib_Chrysalis_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/Chrysalis.o obj/analysis/DNAVector.o obj/analysis/TranscriptomeGraph.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./Chrysalis
g++ -ggdb3 -fopenmp -o ./Chrysalis obj/analysis/Chrysalis.o -L. -lm -pthread -l_Chrysalis_temp
/bin/rm lib_Chrysalis_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:39 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/CreateIwormFastaBundle.cc -o obj/analysis/CreateIwormFastaBundle.o
/bin/rm -f lib_CreateIwormFastaBundle_temp.a
ar -qc lib_CreateIwormFastaBundle_temp.a obj/analysis/AACodons.o obj/analysis/CreateIwormFastaBundle.o obj/analysis/DNAVector.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./CreateIwormFastaBundle
g++ -ggdb3 -fopenmp -o ./CreateIwormFastaBundle obj/analysis/CreateIwormFastaBundle.o -L. -lm -pthread -l_CreateIwormFastaBundle_temp
/bin/rm lib_CreateIwormFastaBundle_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:42 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/GraphFromFasta.cc -o obj/analysis/GraphFromFasta.o
./analysis/GraphFromFasta.cc: In function ‘bool SimpleHalves(const DNAVector&)’:
./analysis/GraphFromFasta.cc:255:15: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
&&
^
./analysis/GraphFromFasta.cc: In function ‘void report_iworm_graph(std::map&, std::map&)’:
./analysis/GraphFromFasta.cc:631:31: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int j = 0; j < adjacent_nodes.size(); j++) {
^
./analysis/GraphFromFasta.cc: In function ‘int main(int, char**)’:
./analysis/GraphFromFasta.cc:1164:30: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i bubble_up_cluster_growth(std::map&, std::map&)’:
./GraphFromFasta_MPI.cc:706:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int i = 0; i < pool_vec.size(); i++) {
^
./GraphFromFasta_MPI.cc:727:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int i = 0; i < pool_vec.size(); i++) {
^
./GraphFromFasta_MPI.cc:834:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int i = 0; i < pool_vec.size(); i++) {
^
./GraphFromFasta_MPI.cc: In function ‘void add_unclustered_iworm_contigs(svec&, vecDNAVector&)’:
./GraphFromFasta_MPI.cc:1144:30: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (size_t i = 0; i < p.size(); i++) {
^
./GraphFromFasta_MPI.cc: In function ‘int main(int, char**)’:
./GraphFromFasta_MPI.cc:1453:60: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (iworm_counter % 1000 == 0 || iworm_counter == dna.size()-1) {
^
./GraphFromFasta_MPI.cc:1458:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (j=0; j<=d.isize()-k; j++) {
^
./GraphFromFasta_MPI.cc:1479:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (c == i)
^
./GraphFromFasta_MPI.cc:1503:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (c == i)
^
./GraphFromFasta_MPI.cc:2235:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (j=0; j<=d.isize()-k; j++) {
^
./GraphFromFasta_MPI.cc:2264:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (c == i) {
^
./GraphFromFasta_MPI.cc:2359:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (c == i) {
^
./GraphFromFasta_MPI.cc:2475:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i ^
./GraphFromFasta_MPI.cc:2483:30: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (size_t j = 0; j < p.size(); j++) {
^
./GraphFromFasta_MPI.cc:2496:30: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (size_t j = 0; j < p.size(); j++) {
^
/bin/rm -f lib_GraphFromFasta_MPI_temp.a
ar -qc lib_GraphFromFasta_MPI_temp.a obj/GraphFromFasta_MPI.o obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/DeBruijnGraph.o obj/analysis/KmerTable.o obj/analysis/NonRedKmerTable.o obj/analysis/sequenceUtil.o obj/analysis/stacktrace.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./GraphFromFasta_MPI
g++ -ggdb3 -fopenmp -o ./GraphFromFasta_MPI obj/GraphFromFasta_MPI.o -L. -lm -pthread -l_GraphFromFasta_MPI_temp
/bin/rm lib_GraphFromFasta_MPI_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:53 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/IsoformAugment.cc -o obj/analysis/IsoformAugment.o
./analysis/IsoformAugment.cc: In function ‘int main(int, char**)’:
./analysis/IsoformAugment.cc:87:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (j=0; j ^
./analysis/IsoformAugment.cc:122:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (j=0; j ^
/bin/rm -f lib_IsoformAugment_temp.a
ar -qc lib_IsoformAugment_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/IsoformAugment.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./IsoformAugment
g++ -ggdb3 -fopenmp -o ./IsoformAugment obj/analysis/IsoformAugment.o -L. -lm -pthread -l_IsoformAugment_temp
/bin/rm lib_IsoformAugment_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:27:56 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/JoinTransByPairs.cc -o obj/analysis/JoinTransByPairs.o
./analysis/JoinTransByPairs.cc: In function ‘int main(int, char**)’:
./analysis/JoinTransByPairs.cc:293:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i ^
./analysis/JoinTransByPairs.cc:341:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i=0; i ^
/bin/rm -f lib_JoinTransByPairs_temp.a
ar -qc lib_JoinTransByPairs_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/JoinTransByPairs.o obj/analysis/KmerTable.o obj/analysis/NonRedKmerTable.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./JoinTransByPairs
g++ -ggdb3 -fopenmp -o ./JoinTransByPairs obj/analysis/JoinTransByPairs.o -L. -lm -pthread -l_JoinTransByPairs_temp
/bin/rm lib_JoinTransByPairs_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:00 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/QuantifyGraph.cc -o obj/analysis/QuantifyGraph.o
/bin/rm -f lib_QuantifyGraph_temp.a
ar -qc lib_QuantifyGraph_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/KmerTable.o obj/analysis/NonRedKmerTable.o obj/analysis/QuantifyGraph.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./QuantifyGraph
g++ -ggdb3 -fopenmp -o ./QuantifyGraph obj/analysis/QuantifyGraph.o -L. -lm -pthread -l_QuantifyGraph_temp
/bin/rm lib_QuantifyGraph_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:03 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/ReadsToTranscripts.cc -o obj/analysis/ReadsToTranscripts.o
/bin/rm -f lib_ReadsToTranscripts_temp.a
ar -qc lib_ReadsToTranscripts_temp.a obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/NonRedKmerTable.o obj/analysis/ReadsToTranscripts.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./ReadsToTranscripts
g++ -ggdb3 -fopenmp -o ./ReadsToTranscripts obj/analysis/ReadsToTranscripts.o -L. -lm -pthread -l_ReadsToTranscripts_temp
/bin/rm lib_ReadsToTranscripts_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:09 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./ReadsToTranscripts_MPI.cc -o obj/ReadsToTranscripts_MPI.o
/bin/rm -f lib_ReadsToTranscripts_MPI_temp.a
ar -qc lib_ReadsToTranscripts_MPI_temp.a obj/ReadsToTranscripts_MPI.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/NonRedKmerTable.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./ReadsToTranscripts_MPI
g++ -ggdb3 -fopenmp -o ./ReadsToTranscripts_MPI obj/ReadsToTranscripts_MPI.o -L. -lm -pthread -l_ReadsToTranscripts_MPI_temp
/bin/rm lib_ReadsToTranscripts_MPI_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:14 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./ReadsToTranscripts_MPI_chang.cc -o obj/ReadsToTranscripts_MPI_chang.o
/bin/rm -f lib_ReadsToTranscripts_MPI_chang_temp.a
ar -qc lib_ReadsToTranscripts_MPI_chang_temp.a obj/ReadsToTranscripts_MPI_chang.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/NonRedKmerTable.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./ReadsToTranscripts_MPI_chang
g++ -ggdb3 -fopenmp -o ./ReadsToTranscripts_MPI_chang obj/ReadsToTranscripts_MPI_chang.o -L. -lm -pthread -l_ReadsToTranscripts_MPI_chang_temp
/bin/rm lib_ReadsToTranscripts_MPI_chang_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:18 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/RunButterfly.cc -o obj/analysis/RunButterfly.o
./analysis/RunButterfly.cc: In member function ‘void JobControl::ClearFiles()’:
./analysis/RunButterfly.cc:107:25: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result]
system(rm.c_str());
^
./analysis/RunButterfly.cc: In member function ‘void JobControl::Submit()’:
./analysis/RunButterfly.cc:77:27: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result]
system(theCmmd.c_str());
^
./analysis/RunButterfly.cc:85:27: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result]
system(theCmmd.c_str());
^
/bin/rm -f lib_RunButterfly_temp.a
ar -qc lib_RunButterfly_temp.a obj/analysis/RunButterfly.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./RunButterfly
g++ -ggdb3 -fopenmp -o ./RunButterfly obj/analysis/RunButterfly.o -L. -lm -pthread -l_RunButterfly_temp
/bin/rm lib_RunButterfly_temp.a
g++ -W -Wall -Wno-unused -Wno-deprecated -ansi -pedantic -Wno-long-long -fno-nonansi-builtins -Wctor-dtor-privacy -Wsign-promo -Woverloaded-virtual -Wendif-labels -O3 -ggdb3 -DMAKE_DATE='"Die Jul 3 11:28:23 CEST 2018 "' -DMAKE_OS_RELEASE='"4.4.0-128-generic"' -DMAKE_RELEASE='"3.0"' -DNEW_MAKEFILE -imacros system/BigFileDefines.h -pthread -ftemplate-depth-30 -fno-strict-aliasing -mieee-fp -iquote . -ISpines -fopenmp -c ./analysis/TranscriptomeFromVaryK.cc -o obj/analysis/TranscriptomeFromVaryK.o
./analysis/TranscriptomeFromVaryK.cc: In function ‘int main(int, char**)’:
./analysis/TranscriptomeFromVaryK.cc:216:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (j=0; j<=d.lsize()-k; j++) {
^
./analysis/TranscriptomeFromVaryK.cc:218:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (int x=j; x ^
/bin/rm -f lib_TranscriptomeFromVaryK_temp.a
ar -qc lib_TranscriptomeFromVaryK_temp.a obj/aligns/KmerAlignCore.o obj/analysis/AACodons.o obj/analysis/DNAVector.o obj/analysis/KmerTable.o obj/analysis/NonRedKmerTable.o obj/analysis/TranscriptomeFromVaryK.o obj/base/ErrorHandling.o obj/base/FileParser.o obj/base/StringUtil.o obj/util/mutil.o
./checkLock ./TranscriptomeFromVaryK
g++ -ggdb3 -fopenmp -o ./TranscriptomeFromVaryK obj/analysis/TranscriptomeFromVaryK.o -L. -lm -pthread -l_TranscriptomeFromVaryK_temp
/bin/rm lib_TranscriptomeFromVaryK_temp.a
make[1]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/Chrysalis'
cd trinity-plugins && make trinity_essentials
make[1]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins'
tar xvf seqtk-trinity.v0.0.2.tar.gz
seqtk-trinity-0.0.2/
seqtk-trinity-0.0.2/.gitignore
seqtk-trinity-0.0.2/LICENSE
seqtk-trinity-0.0.2/Makefile
seqtk-trinity-0.0.2/README.md
seqtk-trinity-0.0.2/khash.h
seqtk-trinity-0.0.2/kseq.h
seqtk-trinity-0.0.2/seqtk.c
seqtk-trinity-0.0.2/testing/
seqtk-trinity-0.0.2/testing/newformat_1.fq
seqtk-trinity-0.0.2/testing/newformat_2.fq
seqtk-trinity-0.0.2/testing/oldformat_1.fq
seqtk-trinity-0.0.2/testing/oldformat_2.fq
cd seqtk-trinity-0.0.2 && make
make[2]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/seqtk-trinity-0.0.2'
gcc -g -Wall -O2 -Wno-unused-function seqtk.c -o seqtk-trinity -lz -lm
seqtk.c: In function ‘stk_comp’:
seqtk.c:444:16: warning: variable ‘lc’ set but not used [-Wunused-but-set-variable]
int la, lb, lc, na, nb, nc, cnt[11];
^
make[2]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/seqtk-trinity-0.0.2'
mv seqtk-trinity-0.0.2/seqtk-trinity ./BIN/.
tar -zxvf "ParaFly-0.1.0".tar.gz && \
cd "ParaFly-0.1.0" && sh ./configure --prefix=`pwd` && make install && \
cp bin/ParaFly ../BIN/
ParaFly-0.1.0/
ParaFly-0.1.0/LICENSE
ParaFly-0.1.0/Makefile
ParaFly-0.1.0/Makefile.am
ParaFly-0.1.0/Makefile.in
ParaFly-0.1.0/README.md
ParaFly-0.1.0/aclocal.m4
ParaFly-0.1.0/bin/
ParaFly-0.1.0/bin/ParaFly
ParaFly-0.1.0/config.h
ParaFly-0.1.0/config.h.in
ParaFly-0.1.0/config.log
ParaFly-0.1.0/config.status
ParaFly-0.1.0/configure
ParaFly-0.1.0/configure.ac
ParaFly-0.1.0/depcomp
ParaFly-0.1.0/install-sh
ParaFly-0.1.0/missing
ParaFly-0.1.0/src/
ParaFly-0.1.0/src/.deps/
ParaFly-0.1.0/src/.deps/ParaFly.Po
ParaFly-0.1.0/src/.deps/argProcessor.Po
ParaFly-0.1.0/src/Makefile
ParaFly-0.1.0/src/Makefile.am
ParaFly-0.1.0/src/Makefile.in
ParaFly-0.1.0/src/ParaFly.cpp
ParaFly-0.1.0/src/argProcessor.cpp
ParaFly-0.1.0/src/argProcessor.hpp
ParaFly-0.1.0/stamp-h1
ParaFly-0.1.0/test/
ParaFly-0.1.0/test/Makefile
ParaFly-0.1.0/test/cmds.txt
ParaFly-0.1.0/test/rand_exit.pl
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for library containing cos... none required
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
make[2]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
Making install in src
make[3]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/src'
g++ -DHAVE_CONFIG_H -I. -I.. -pedantic -fopenmp -Wall -Wextra -Wno-long-long -Wno-deprecated -m64 -g -O2 -MT ParaFly.o -MD -MP -MF .deps/ParaFly.Tpo -c -o ParaFly.o ParaFly.cpp
mv -f .deps/ParaFly.Tpo .deps/ParaFly.Po
g++ -DHAVE_CONFIG_H -I. -I.. -pedantic -fopenmp -Wall -Wextra -Wno-long-long -Wno-deprecated -m64 -g -O2 -MT argProcessor.o -MD -MP -MF .deps/argProcessor.Tpo -c -o argProcessor.o argProcessor.cpp
mv -f .deps/argProcessor.Tpo .deps/argProcessor.Po
g++ -pedantic -fopenmp -Wall -Wextra -Wno-long-long -Wno-deprecated -m64 -g -O2 -o ParaFly ParaFly.o argProcessor.o
make[4]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/src'
test -z "/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/bin" || /bin/mkdir -p "/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/bin"
/usr/bin/install -c ParaFly '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/bin'
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/src'
make[3]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0/src'
make[3]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
make[4]: Entering directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
make[3]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
make[2]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins/ParaFly-0.1.0'
ln -sf Trimmomatic-0.36 Trimmomatic
make[1]: Leaving directory '/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity-plugins'
sh ./util/support_scripts/trinity_install_tests.sh
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Performing Unit Tests of Build

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Inchworm: has been Installed Properly
Chrysalis: has been Installed Properly
QuantifyGraph: has been Installed Properly
GraphFromFasta: has been Installed Properly
ReadsToTranscripts: has been Installed Properly
parafly: has been Installed Properly
➜ trinityrnaseq-Trinity-v2.6.6 git:(master) ✗
➜ trinityrnaseq-Trinity-v2.6.6 git:(master) ✗ ./Trinity

###############################################################################
#

______ ____ ____ ____ ____ ______ __ __
| || \ | || \ | || || | |
| || D ) | | | _ | | | | || | |
|_| |_|| / | | | | | | | |_| |_|| ~ |
| | | \ | | | | | | | | | |___, |
| | | . \ | | | | | | | | | | |
|__| |__|\_||____||__|__||____| |__| |____/

#
#
# Required:
#
# --seqType :type of reads: ('fa' or 'fq')
#
# --max_memory :suggested max memory to use by Trinity where limiting can be enabled. (jellyfish, sorting, etc)
# provided in Gb of RAM, ie. '--max_memory 10G'
#
# If paired reads:
# --left :left reads, one or more file names (separated by commas, no spaces)
# --right :right reads, one or more file names (separated by commas, no spaces)
#
# Or, if unpaired reads:
# --single :single reads, one or more file names, comma-delimited (note, if single file contains pairs, can use flag: --run_as_paired )
#
# Or,
# --samples_file tab-delimited text file indicating biological replicate relationships.
# ex.
# cond_A cond_A_rep1 A_rep1_left.fq A_rep1_right.fq
# cond_A cond_A_rep2 A_rep2_left.fq A_rep2_right.fq
# cond_B cond_B_rep1 B_rep1_left.fq B_rep1_right.fq
# cond_B cond_B_rep2 B_rep2_left.fq B_rep2_right.fq
#
# # if single-end instead of paired-end, then leave the 4th column above empty.
#
####################################
## Misc: #########################
#
# --SS_lib_type :Strand-specific RNA-Seq read orientation.
# if paired: RF or FR,
# if single: F or R. (dUTP method = RF)
# See web documentation.
#
# --CPU :number of CPUs to use, default: 2
# --min_contig_length :minimum assembled contig length to report
# (def=200)
#
# --long_reads :fasta file containing error-corrected or circular consensus (CCS) pac bio reads
# (** note: experimental parameter **, this functionality continues to be under development)
#
# --genome_guided_bam :genome guided mode, provide path to coordinate-sorted bam file.
# (see genome-guided param section under --show_full_usage_info)
#
# --jaccard_clip :option, set if you have paired reads and
# you expect high gene density with UTR
# overlap (use FASTQ input file format
# for reads).
# (note: jaccard_clip is an expensive
# operation, so avoid using it unless
# necessary due to finding excessive fusion
# transcripts w/o it.)
#
# --trimmomatic :run Trimmomatic to quality trim reads
# see '--quality_trimming_params' under full usage info for tailored settings.
#
#
# --no_normalize_reads :Do *not* run in silico normalization of reads. Defaults to max. read coverage of 50.
# see '--normalize_max_read_cov' under full usage info for tailored settings.
# (note, as of Sept 21, 2016, normalization is on by default)
#
# --no_distributed_trinity_exec :do not run Trinity phase 2 (assembly of partitioned reads), and stop after generating command list.
#
#
# --output :name of directory for output (will be
# created if it doesn't already exist)
# default( your current working directory: "/home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/trinity_out_dir"
# note: must include 'trinity' in the name as a safety precaution! )
#
# --workdir :where Trinity phase-2 assembly computation takes place (defaults to --output setting).
# (can set this to a node-local drive or RAM disk)
#
# --full_cleanup :only retain the Trinity fasta file, rename as ${output_dir}.Trinity.fasta
#
# --cite :show the Trinity literature citation
#
# --verbose :provide additional job status info during the run.
#
# --version :reports Trinity version (Trinity-v2.6.6) and exits.
#
# --show_full_usage_info :show the many many more options available for running Trinity (expert usage).
#
#
###############################################################################
#
# *Note, a typical Trinity command might be:
#
# Trinity --seqType fq --max_memory 50G --left reads_1.fq --right reads_2.fq --CPU 6
#
#
# and for Genome-guided Trinity:
#
# Trinity --genome_guided_bam rnaseq_alignments.csorted.bam --max_memory 50G
# --genome_guided_max_intron 10000 --CPU 6
#
# see: /home/urbe/Tools/trinityrnaseq-Trinity-v2.6.6/sample_data/test_Trinity_Assembly/
# for sample data and 'runMe.sh' for example Trinity execution
#
# For more details, visit: http://trinityrnaseq.github.io
#
###############################################################################

Convert EnsEMBL GTF to Annotation table (Geneid, GeneSymbol, GeneWiseChrLocation, GeneClass, Strand) Raw

EagleEye — Fri, 24 Jun 2016 18:08:49 -0500

Bash Script source:

https://gist.github.com/santhilalsubhash/367befcf5216be4b1fd9

Information:

This script converts EnsEMBL GTF (Ex: https://gist.githubusercontent.com/santhilalsubhash/1e7cca357e52a181dc25/raw/cfb803e07900a2baefbb6534f1299fd30cb57a29/sample.GTF) file to annotation table format. It generated two files
1) Transcript wise chromosome location with information about transcripts (Ex: https://gist.githubusercontent.com/santhilalsubhash/c7dec516e0338503a4b6/raw/de0af1a39f0005c4ce7321c5ae57fc8b4a14c7f4/sample.GTF_enst_annotation.txt)
2) Gene wise chromosome location with information about genes (Ex: https://gist.githubusercontent.com/santhilalsubhash/c92006c5080f0333bec2/raw/d16e0b2440d73b09b486d3c9751cdb248a73fa0b/sample.GTF_ensg_annotation.txt)

Note: You can download GTF files from http://www.ensembl.org/info/data/ftp/index.html

ComparativeGenomics Exercise2

Neel — Wed, 22 Aug 2018 22:10:56 -0500

COMPARATIVE MICROBIAL GENOMICS ANALYSIS WORKSHOP @ cbs.dtu.dk

Free Bioinformatics workbench https://www.mn.uio.no/ifi/english/research/networks/clsi/earlier_seminars/2012/tammivesth_osloseminarfinal.pdf

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html

Introduction to Bioinformatics

eliabrodsky — Wed, 05 Jun 2019 14:58:11 -0500

Introduction to bioinformatics is a course for biologists and clinicians that would like to learn more about the way bioinformatics is used in healthcare, biotech and pharmaceuitcal industry as well as basic research. The course covers many of the topics transformed by the emergence of big data and computational technologies. To learn more about the course, visit: https://edu.t-bio.info/course/introduction-bioinformatics/

Bioinformatics Training Courses At RASA LSI

RASA Life Sciences — Wed, 06 Nov 2019 00:30:51 -0600

RASA conducts comprehensive Life Science skill development training courses in Pune, India for working professionals, researchers, students and job-seeker. The trainings are crafted meticulously, covering different modules of courses such as Bioinformatics course, In silico Drug Discovery course, Next Generation Sequence data analysis course, Molecular Biology & Life science software development course wherein you learn from industry leaders how to apply these skills in life science & have a command over software developing process by using various methodologies. We conduct in-class training and instructor-led live online classes worldwide, along with corporate and skill development training worldwide.

Workshops are conducted in regular intervals on Drug Designing, Protein Modeling and Simulation, Chemoinformatics, Bioinformatics etc.The workshops are highly beneficial for working professionals, students, researcher for enhancements of the skills in short duration.

ClinCNV: Detection of copy number changes in Germline/Trio/Somatic contexts in NGS data

Neel — Thu, 16 Jan 2020 23:16:02 -0600

ClinCNV detects CNVs in germline and somatic context in NGS data (targeted and whole-genome). We work in cohorts, so it makes sense to try ClinCNV if you have more than 10 samples (recommended amount - 40 since we estimate variances from the data). By "cohort" we mean samples sequenced with the same enrichment kit with approximately the same depth (ie 1x WGS and 30x WGS better be analysed in separate runs of ClinCNV). Of course it is better if your samples were sequenced within the same sequencing facility.

Address of the bookmark: https://github.com/imgag/ClinCNV