BOL: Related items

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

lordFAST: sensitive and Fast Alignment Search Tool for LOng noisy Read sequencing Data

BioJoker — Tue, 27 Nov 2018 04:43:57 -0600

lordFAST is a sensitive tool for mapping long reads with high error rates. lordFAST is specially designed for aligning reads from PacBio sequencing technology but provides the user the ability to change alignment parameters depending on the reads and application.

lordFAST, a novel long-read mapper that is specifically designed to align reads generated by PacBio and potentially other SMS technologies to a reference. lordFAST not only has higher sensitivity than the available alternatives, it is also among the fastest and has a very low memory footprint.

Address of the bookmark: https://github.com/vpc-ccg/lordfast

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Rahul Nayak — Sat, 06 Jul 2019 03:48:22 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler