BOL: Related items

PLAST: A fast, accurate and NGS scalable bank-to-bank sequence similarity search tool

Jit — Fri, 01 Dec 2017 04:10:54 -0600

PLAST is a fast, accurate and NGS scalable bank-to-bank sequence similarity search tool providing significant accelerations of seeds-based heuristic comparison methods, such as the Blast suite of algorithms.

Relying on unique software architecture, PLAST takes full advantage of recent multi-core personal computers without requiring any additional hardware devices.

PLAST stands for Parallel Local Sequence Alignment Search Tool and is was published in BMC Bioinformatics.

PLAST is a general purpose sequence comparison tool providing the following benefits:

PLAST is a high-performance sequence comparison tool designed to compare two sets of sequences (query vs. reference),
Reduces the processing time of sequences comparisons while providing highest quality results,
Contains a fully integrated data filtering engine capable of selecting relevant hits with user-defined criteria (E-Value, identity, coverage, alignment length, etc.),
Does not require any additional hardware, since it is a software solution. It is easy to install, cost-effective, takes full advantage of multi-core processors and uses a small RAM footprint,
Ready to be used on desktop computer, cluster, cloud as well as within distributed system running Hadoop.

https://plast.inria.fr/

Address of the bookmark: https://plast.inria.fr/

MIX: Combining multiple assemblies from NGS data

Rahul Nayak — Tue, 08 May 2018 04:58:05 -0500

Mix is a tool that combines two or more draft assemblies, without relying on a reference genome and has the goal to reduce contig fragmentation and thus speed-up genome finishing. The proposed algorithm builds an extension graph where vertices represent extremities of contigs and edges represent existing alignments between these extremities. These alignment edges are used for contig extension. The resulting output assembly corresponds to a path in the extension graph that maximizes the cumulative contig length.

The Mix algorithm, approach and results were published in BMC bioinformatics : http://www.biomedcentral.com/1471-2105/14/S15/S16.

Address of the bookmark: https://github.com/cbib/MIX

URDIP Pune Bioinformatics SRF/PA Openings

Sat, 20 Sep 2014 20:48:50 -0500

CSIR UNIT FOR RESEARCH AND DEVELOPMENT OF INFORMATION PRODUCTS
NCL Campus, S.No.113,114, Pashan, Pune 411 008

ADVERTISEMENT NO. - URDIP/ 5/2014

Learning opportunity for young Science and Engineering professionals to make a career in Information Science Industry CSIR has set up a Unit for Research and Development of Information Products (CSIR-URDIP) at Pune to work in the area of Scientific Informatics (ChemBioinformatics/Patent Informatics/Phytoinformatics/Toxinformatics) and related
software development projects.

Applications are invited from CSIR - UGC NET Qualified Candidates for consideration as Project Fellow (PF) and/or Senior Project Fellow (SPF) based on the experience to work on existing and new projects at CSIRURDIP.

Project Fellow

Remuneration - (Rs. 16,000.00 + 20% HRA)

M. Sc. In Biochemistry/Microbiology/Bioinformatics [Post-code A02] only with minimum of 55% marks

Senior Project Fellow

Remuneration - (Rs. 18,000.00 + 20% HRA)

M. Sc. in Biochemistry/Microbiology/Bioinformatics [Post-code A05] only with minimum of 55% marks plus two years research or relevant informatics experience

Please visit www.urdip.res.in/career.htm to apply online by 30th September, 2014.

Successful candidates who have appeared for NET exam in 2012 and 2013 are only eligible to apply.

Advertisement: http://115.112.95.114/urhr/download/Advt5_2014.pdf

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

Bioinformatics SVIMS Project Assistant Walk IN

Sat, 20 Sep 2014 21:02:29 -0500

SRI VENKATESWARA INSTITUTE OF MEDICAL SCIENCES
TIRUPATI, ANDHRA PRADESH, INDIA- 517 507
BIOINFORMATICS CENTRE, DEPARTMENT OF BIOINFORMATICS

Eligible candidates are invited for a walk-in-interview for recruitment of Project Assistant in SVIMS Bioinformatics centre under the BTISnet Project entitled “Creation of Bioinformatics Infrastructure Facility for promotion of Biology teaching through Bioinformatics” on 25.09.2014 at 11 AM in SVIMS, Tirupati. The engagement will be made purely on temporary basis for a period of one year and it can be terminated at any time without notice or without assigning any reason thereof by the Coordinator of the Project. The person engaged shall not be entitled for any claim implicit or explicit for absorption in the University.

1. Name of the post : Project Assistant

2. Qualification :
i) Essential : MSc Bioinformatics/MTech (Biotechnology/Bioinformatics)

ii) Desirable : Experience in Bioinformatics research work (Preference will be given to candidates qualified in BINC/UGC/CSIR/NET/GATE)

3. Remuneration : 16000 + 10% HRA for NET/GATE candidates 14000 + 10% HRA for M. Tech / M.Sc. Candidates

4. Place of posting : Tirupati

5. Duration of the Project : One year

Terms and conditions:

1. Candidates are required to submit the Biodata relevant certificates in support of their age and educational qualification etc., before the interview committee, SVIMS University, Tirupati.

2. Candidates called for interview will attend the interview at their own cost.
3. Interim enquiries will not be entertained.
4. The maximum age limit for Project Assistant is 28 years for general category and 33 years for SC and ST category candidates as on 25th September, 2014.

http://svr98.ehostpros.com/~svimsb98/Project%20Assistant_notification.pdf

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies

Jit — Fri, 06 Jul 2018 03:36:45 -0500

KAT is a suite of tools that analyse jellyfish hashes or sequence files (fasta or fastq) using kmer counts. The following tools are currently available in KAT:

hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
- kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
- seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
- density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
- profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
- spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
- spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
- spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339

Address of the bookmark: https://github.com/TGAC/KAT

Nieduszynski Group

Fri, 26 Sep 2014 19:35:06 -0500

Complete, accurate replication of the genome is essential for life. All chromosomes in eukaryotic cells must be duplicated and then segregated to daughter cells to ensure genetic integrity and produce the large number of cells that make up a multicellular organism. We are using genetic, genomic and computational methods to understand how chromosome replication is regulated to ensure genome stability. By focusing on the basic biology that underpins cell growth and division we aim to provide new insights that may help our understanding of diseases such as cancer and congenital disorders.

More http://www.nieduszynski.org/index.php
http://www.path.ox.ac.uk/research/cell-biology-and-pathology/conrad-nieduszynski-group

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

CANU genome assembly parameters !

Rahul Nayak — Mon, 07 Jan 2019 08:40:37 -0600

Choose the appropriate parameters to run Canu and run it. The assembly will take about an hour. You can use two cores (parameter -maxThreads=2) and you would like to disable cluster option, since we compute on a single Amazon server set off the option to compute on cluster useGrid=false. This specifications should be for your project discussed with a local computing guru. The parameters that are in square brackets [] are optional, symbol | stands for "or".

usage:   canu [-correct | -trim | -assemble | -trim-assemble] \
              [-s ] \
               -p  \
               -d  \
               genomeSize=[g|m|k] \
               -maxThreads=2 \
               useGrid=false \
              [other-options] \
               read_file.fastq.gz

A default Canu run produces usually high quality assembly, example of a command that was used for testing can be found below. However, there are still a lot of parameters that are possible to tweak. For example if we desire to assemble haplotypes separately of if we want to smash them together, we can alternate the error correction process.

canu -p test_asmbl \
     -d asm_test3 \
     genomeSize=2m \
     -maxThreads=2 useGrid=false \
     -pacbio-raw \ ~/pacbio/dna/sample_reads.fastq.gz

There is a brilliant section in documentation about parameter tweaking.

The output directory contains will contain many files. The most interesting ones are:

*.correctedReads.fasta.gz : file containing the input sequences after correction, trim and split based on consensus evidence.
*.trimmedReads.fastq : file containing the sequences after correction and final trimming
*.layout : file containing informations about read inclusion in the final assembly
*.gfa : file containing the assembly graph by Canu
*.contigs.fasta : file containing everything that could be assembled and is part of the primary assembly

The basic stats of assembly can be read from reports generated by the assembler, or calculated using standard UNIX command line tools.

More at https://canu.readthedocs.io/en/latest/faq.html