BOL: Related items

FSA: Fast Statistical Alignment

Jit — Mon, 06 Feb 2017 04:26:01 -0600

FSA is a probabilistic multiple sequence alignment algorithm which uses a "distance-based" approach to aligning homologous protein, RNA or DNA sequences. Much as distance-based phylogenetic reconstruction methods like Neighbor-Joining build a phylogeny using only pairwise divergence estimates, FSA builds a multiple alignment using only pairwise estimations of homology. This is made possible by the sequence annealing technique for constructing a multiple alignment from pairwise comparisons, developed by Ariel Schwartz in "Posterior Decoding Methods for Optimization and Control of Multiple Alignments."

FSA brings the high accuracies previously available only for small-scale analyses of proteins or RNAs to large-scale problems such as aligning thousands of sequences or megabase-long sequences. FSA introduces several novel methods for constructing better alignments:

FSA uses machine-learning techniques to estimate gap and substitution parameters on the fly for each set of input sequences. This "query-specific learning" alignment method makes FSA very robust: it can produce superior alignments of sets of homologous sequences which are subject to very different evolutionary constraints.
FSA is capable of aligning hundreds or even thousands of sequences using a randomized inference algorithm to reduce the computational cost of multiple alignment. This randomized inference can be over ten times faster than a direct approach with little loss of accuracy.
FSA can quickly align very long sequences using the "anchor annealing" technique for resolving anchors and projecting them with transitive anchoring. It then stitches together the alignment between the anchors using the methods described above.
The included GUI, MAD (Multiple Alignment Display), can display the intermediate alignments produced by FSA, where each character is colored according to the probability that it is correctly aligned (see the picture and movie at the top of the page).

You can see more information on the FAQ.

Address of the bookmark: http://fsa.sourceforge.net/

FOGSAA: Fast Optimal Global Sequence Alignment Algorithm

Jit — Fri, 08 Dec 2017 14:41:08 -0600

Sequence alignment algorithms are widely used to infer similarirty and the point of differences between pair of sequences. FOGSAA is a fast Global alignment algorithm. It is basically a branch and bound approach which starts branch expansion in a greedy way taking the symbols from the given pair of sequences (protein or nucleotide) and results in an optimal alignment faster than conventional dymanic programming techniques. It is also better than the heuristic methods with respect to alignment quality.

Address of the bookmark: http://www.isical.ac.in/~bioinfo_miu/FOGSAA.htm

Platypus: A Haplotype-Based Variant Caller For Next Generation Sequence Data

Shruti Paniwala — Thu, 25 Oct 2018 06:14:55 -0500

Platypus is a tool designed for efficient and accurate variant-detection in high-throughput sequencing data. By using local realignment of reads and local assembly it achieves both high sensitivity and high specificity. Platypus can detect SNPs, MNPs, short indels, replacements and (using the assembly option) deletions up to several kb. It has been extensively tested on whole-genome, exon-capture, and targeted capture data, it has been run on very large datasets as part of the Thousand Genomes and WGS500 projects, and is being used in clinical sequencing trials in the Mainstreaming Cancer Genetics programme.

Tutorial https://github.com/andyrimmer/Platypus/blob/master/misc/README.txt

Address of the bookmark: http://www.well.ox.ac.uk/platypus

Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome

BioStar — Wed, 22 Jul 2020 10:11:13 -0500

We have developed the Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome. We envisage its use during annotation jamborees, genome comparison and for use by developers for rapid feedback during annotation software development and testing. SOBA also provides annotation consistency feedback to ensure correct use of terminology within annotations, and guides users to add new terms to the Sequence Ontology when required. SOBA is available at http://www.sequenceontology.org/cgi-bin/soba.cgi.

More at https://pubmed.ncbi.nlm.nih.gov/20494974/

Address of the bookmark: http://www.sequenceontology.org/cgi-bin/soba.cgi

NCBIBLAST+ 2.14.1 now available

Neel — Wed, 30 Aug 2023 02:36:13 -0500

#NCBIBLAST+ 2.14.1 now available with improved documentation, faster and more reliable database downloads, and some bug fixes.

Check out the changes they made.

They added the cleanup-blastdb-volumes.py script to remove unused BLAST database volumes. Read the documentation here.

They also switched the protocol from ftp to https to access BLAST databases for increased performance and reliability when downloading data from the NCBI with the update_blastdb.pl script.

And fixed a few bugs related to downloading data from the NCBI, and mt_mode crashing blastn and blastx.

Check out the release notes.

Download BLAST+ 2.14.1

Questions or comments? Please write the BLAST help desk.

More info and download: https://blast.ncbi.nlm.nih.gov/doc/blast-news/2023-BLAST-News.html

Tbl2asn: a command-line program that automates the creation of sequence records for submission to GenBank

Poonam Mahapatra — Mon, 29 May 2017 07:37:08 -0500

Tbl2asn is a command-line program that automates the creation of sequence records for submission to GenBank. It uses many of the same functions as Sequin but is driven generally by data files. Tbl2asn generates .sqn files for submission to GenBank. Additional manual editing is not required before submission.

Tbl2asn is available by anonymous FTP. Copy the right version for your platform, then uncompress the file, rename it to "tbl2asn", and set the permissions, as necessary for the platform.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/genbank/tbl2asn2/

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

NanoSim: nanopore sequence read simulator based on statistical characterization.

Jit — Mon, 18 Dec 2017 04:16:31 -0600

NanoSim, a fast and scalable read simulator that captures the technology-specific features of ONT data and allows for adjustments upon improvement of nanopore sequencing technology. The first step of NanoSim is read characterization, which provides a comprehensive alignment-based analysis and generates a set of read profiles serving as the input to the next step, the simulation stage. The simulation stage uses the model built in the previous step to produce in silico reads for a given reference genome. NanoSim is written in Python and R. The source files and manual are available at the Genome Sciences Centre website: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

https://github.com/bcgsc/NanoSim

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

Breakpointer: using local mapping artifacts to support sequence breakpoint discovery from single-end reads

Jit — Tue, 12 Jun 2018 12:41:10 -0500

Breakpointer is a fast tool for locating sequence breakpoints from the alignment of single end reads (SE) produced by next generation sequencing (NGS). It adopts a heuristic method in searching for local mapping signatures created by insertion/deletions (indels) or more complex structural variants(SVs).

Address of the bookmark: https://github.com/ruping/Breakpointer

AMStat: display statistics of large sequence files from next generation sequencing projects

Neel — Fri, 09 Nov 2018 13:34:56 -0600

SAMStat is an efficient C program to quickly display statistics of large sequence files from next generation sequencing projects. When applied to SAM/BAM files all statistics are reported for unmapped, poorly and accurately mapped reads separately. This allows for identification of a variety of problems, such as remaining linker and adaptor sequences, causing poor mapping. Apart from this SAMStat can be used to verify individual processing steps in large analysis pipelines.

Address of the bookmark: http://samstat.sourceforge.net/