BOL: Related items

OrthoANI: An improved algorithm and software for calculating average nucleotide identity

Abhimanyu Singh — Wed, 12 Dec 2018 08:36:08 -0600

OAT uses OrthoANI to measure the overall similarity between two genome sequences. ANI and OrthoANI are comparable algorithms: they share the same species demarcation cut-off at 95~96% and large comparison studies have demonstrated both algorithms to produce near identical reciprocal similarities. Details of the OrthoANI algorithm is given in (Lee et al. 2015). OAT employs an easy-to-follow Graphical User Interface that allow researchers to calculate OrthoANI values between genomes of interest without unfamiliar Command Line Environments. Moreover, the OAT_cmd command-line software can be integrated into preexisting bioinformatics pipelines.

Address of the bookmark: https://www.ezbiocloud.net/tools/orthoani

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

Juicebox: Visualization and analysis software for Hi-C data

Jit — Fri, 21 Feb 2020 00:33:38 -0600

Juicebox is visualization software for Hi-C data. This distribution includes the source code for Juicebox, Juicer Tools, and Assembly Tools. Download Juicebox here, or use Juicebox on the web. Detailed documentation is available on the wiki. Instructions below pertain primarily to usage of command line tools and the Juicebox jar files.

Juicebox can now be used to visualize and interactively (re)assemble genomes. Check out the Juicebox Assembly Tools Module website https://aidenlab.org/assembly for more details on how to use Juicebox for assembly.

GUI at https://aidenlab.org/juicebox/

Address of the bookmark: https://github.com/aidenlab/Juicebox

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

GEnView: A phylogeny based comparative genomics software to analyze the genetic environment of genes

Abhi — Tue, 28 Dec 2021 01:49:03 -0600

A phylogeny based comparative genomics software to analyze the genetic environment of genes. The user can select one or several taxa and provide one or several reference protein(s). Genomes and plasmids (based on user choice) will be downloaded from the NCBI Assembly/NR database and searched for the respective gene. Alternatively, custom genomes can be provided. User selected stretches (20kbp by default) of the genes genetic environment are extracted, annotated and aligned between all genomes. The sequences are then visualized, enabling comparison of synteny and gene content.

More at https://pubmed.ncbi.nlm.nih.gov/34951622/

Address of the bookmark: https://github.com/EbmeyerSt/GEnView

dna2bit: an ultra-fast and accurate genomic distance estimation software

LEGE — Sun, 31 Aug 2025 06:24:58 -0500

dna2bit is a software tool developed in C++11, leveraging the capabilities of OpenMP for parallel computing and the popcount technique for efficient bit manipulation. It has been thoroughly tested using the g++ and clang compilers on both Linux and MacOS platforms.

Address of the bookmark: https://github.com/lijuzeng/dna2bit