BOL: Related items

Ra assembler - a de novo DNA assembler for third generation sequencing data

biogeek — Wed, 27 Dec 2017 20:36:54 -0600

Integration of the Ra assembler - a de novo DNA assembler for third generation sequencing data developed on Faculty of Electrical Engineering and Computing (FER), Ruder Boskovic Institute (RBI) and Genome Institute of Singapore (GIS).

Ra is in development since 2014 in the form of several separate components that used to be run individually.
This project aims to ease the usage of Ra by integrating it into a complete de novo assembly tool.

Unlike other state-of-the-art assemblers, Ra does not have an error correction step. Instead, it relies on detecting overlaps using a very sensitive and specific overlapper ("graphmap -w owler", https://github.com/isovic/graphmap) and constructing and reducing an overlap graph (Ra layout, https://github.com/mariokostelac/ra).

Address of the bookmark: https://github.com/mariokostelac/ra-integrate/

Want to Know which genome assembler rule the world ?

Rahul Agarwal — Sun, 11 Aug 2013 11:42:32 -0500

Assemblathon 2: evaluating de novo methods of genome assembly

http://www.gigasciencejournal.com/content/2/1/10/abstract

http://blogs.nature.com/news/2013/07/genome-assembly-contest-prompts-soul-searching.html

http://assemblathon.org/post/44431915644/feedback-and-analysis-of-the-assemblathon-2-p

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

YASRA: Reference based assembler

Abhimanyu Singh — Wed, 01 Mar 2017 08:32:45 -0600

YASRA (Yet Another Short Read Assembler) performs comparative assembly of short reads using a reference genome, which can differ substantially from the genome being sequenced. Mapping reads to reference genomes makes use of LASTZ (Harris et al), a pairwise sequence aligner compatible with BLASTZ. Special scoring sets were derived to improve the performance, both in runtime and quality for 454 and Illumina sequence reads.

YASRA uses LASTZ (http://bx.psu.edu/miller_lab for released version and http://www.bx.psu.edu/~rsharris/lastz/newer for newer version) for aligning the sequences to the reference genome. Please install LASTZ (the newest version on http://www.bx.psu.edu/~rsharris/lastz/newer) and add the LASTZ binary in your executable/binary search path before installing YASRA.

Address of the bookmark: https://github.com/aakrosh/YASRA

PERGA: A Paired-End Read Guided De Novo Assembler for Extending Contigs Using SVM and Look Ahead Approach

Rahul Nayak — Tue, 05 Jun 2018 09:57:11 -0500

PERGA - Paired End Reads Guided Assembler PERGA is a novel sequence reads guided de novo assembly approach which adopts greedy-like prediction strategy for assembling reads to contigs and scaffolds. Instead of using single-end reads to construct contig, PERGA uses paired-end reads and different read overlap sizes from O ≥ Omax to Omin to resolve the gaps and branches. Moreover, by constructing a decision model using machine learning approach based on branch features, PERGA can determine the correct extension in 99.7% of cases. PERGA will try to extend the contigs by all feasible nucleotides and determine if these multiple extensions due to sequencing errors or repeats by using looking ahead technology, and it also try to separate the different repeats of nearby genomic regions to make the assembly result more longer and accurate. The simulated E.coli paired-end reads data are generated using GemSim (KE McElroy, F Luciani, T Thomas. Gemsim: General, Error-Model Based Simulator of Next-Generation Sequencing Data. BMC Genomics 2012, 13:74), with coverage 50x, 60x, 100x, read lengths 100-bp, and can be downloaded from https://github.com/zhuxiao/data_PERGA.

Address of the bookmark: https://github.com/hitbio/PERGA

The MARVEL assembler

Jit — Fri, 04 May 2018 19:18:41 -0500

MARVEL consists of a set of tools that facilitate the overlapping, patching, correction and assembly of noisy (not so noisy ones as well) long reads.

The assembly process can be summarized as follows:

overlap
patch reads
overlap (again)
scrubbing
assembly graph construction and touring
optional read correction
fasta file creation

Address of the bookmark: https://github.com/schloi/MARVEL

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Integrative Meta-Assembly Pipeline (IMAP): Chromosome-level genome assembler combining multiple de novo assemblies

Jit — Sat, 31 Aug 2019 11:30:41 -0500

Chromosome-level genome assembler combining multiple de novo assemblies

https://github.com/jkimlab/IMAP

Address of the bookmark: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0221858

Tadpole: an assembler, error-corrector, and read-extender

BioStar — Tue, 04 Feb 2020 23:35:40 -0600

Tadpole is a kmer-based assembler, with additional capabilities of error-correcting and extending reads. It does not do any complicated graph analysis or scaffolding, and therefore, is not particularly good for diploid organisms. Tadpole is very conservative and optimized for correctness rather than length; which is to say, it stops at every branch, and condenses every repeat. Also, it does not currently do scaffolding.

To error-correct reads:
tadpole.sh in=reads.fq out=corrected.fq mode=correct

To extend reads by 50bp in each direction:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50

To error-correct and extend at the same time, using a kmer length of 62:
tadpole.sh in=reads.fq out=extended.fq mode=extend el=50 er=50 k=62 ecc=t

More at http://seqanswers.com/forums/showthread.php?t=61445

Address of the bookmark: https://jgi.doe.gov/data-and-tools/bbtools/bb-tools-user-guide/tadpole-guide/

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm