BOL: Related items

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

CViT: Chromosome Viewing Tool

Rahul Nayak — Wed, 02 Jan 2019 04:10:09 -0600

CViT - Chromosome Viewing Tool. A collection of Perl scripts that enable quick visualizations of features on linkage groups, psuedochromosomes or cytogenetic maps. Intended for whole-genome views of data but can be used to create images of single chromosomes/linkage groups, contigs, or BACs, or even proteins -- any feature that has a location on a backbone. Handles most standard genetic/genomic coordinate systems. Reads GFF3 data and produces a PNG or SVG image.

https://www.hindawi.com/journals/ijpg/2011/373875/

Address of the bookmark: https://sourceforge.net/projects/cvit/

QuasR: Quantification and annotation of short reads in R

Neel — Fri, 13 Aug 2021 07:44:05 -0500

The QuasR package (short for Quantify and annotate short reads in R) integrates the functionality of several R packages (such as IRanges (Lawrence et al. 2013) and Rsamtools) and external software (e.g. bowtie, through the Rbowtie package, and HISAT2, through the Rhisat2 package). The package aims to cover the whole analysis workflow of typical high throughput sequencing experiments, starting from the raw sequence reads, over pre-processing and alignment, up to quantification. A single R script can contain all steps of a complete analysis, making it simple to document, reproduce or share the workflow containing all relevant details.

Address of the bookmark: https://www.bioconductor.org/packages/devel/bioc/vignettes/QuasR/inst/doc/QuasR.html

Figeno: Tool for plotting sequencing data along genomic coordinates.

LEGE — Tue, 17 Sep 2024 02:28:15 -0500

Tool for plotting sequencing data along genomic coordinates.

FIGENO is a
  FIGure
    GENerator
for GENOmics

With figeno, you can plot various types of sequencing data along genomic coordinates. Video overview: https://www.youtube.com/watch?v=h1cBeXoSYTA.

Address of the bookmark: https://github.com/CompEpigen/figeno

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

CAMSA :: a tool for Comparative Analysis and Merging of Scaffold Assemblies

Rahul Nayak — Thu, 28 Dec 2017 09:10:26 -0600

CAMSA – is a tool for Comparative Analysis and Merging of Scaffold Assemblies, distributed both as a standalone software package and as Python library under the MIT license.

Main features:

works with any number of scaffold assemblies in de-novo non-progressive fashion
allows to simultaneously work with scaffold assemblies obtained from any in silico and in vitro techniques, supporting multiple existing formats via built-in converters
creates an extensive report with several comparative quality metrics (both on assembly level and on the level of individual assembly points)
constructs a merged combined scaffold assembly
provides an interactive framework for a visual comparative analysis of the given assemblies

Address of the bookmark: https://cblab.org/camsa/

%MinMax: A versatile tool for calculating and comparing synonymous codon usage and its impact on protein folding.

Surabhi Chaudhary — Thu, 24 May 2018 02:53:31 -0500

%MM calculates whether a given gene sequence encodes amino acids using the most common codons possible, the least common codons possible, or (most typically) some combination of these extremes. See our PLoS ONE paper for more details on how the %MinMax algorithm works. %MinMax results are averaged over an 18-codon sliding window; hence the result for "codon window = 1" is the average codon usage for codons 1-18, codon window 2 = codons 2-19, etc.

Address of the bookmark: http://www.codons.org/

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER

mScaffolder: A comparative genome scaffolding tool

Jit — Fri, 15 Jun 2018 04:48:01 -0500

A comparative genome scaffolding tool based on MUMmer

mScaffolder scaffolds a genome using an existing high quality genome as the reference. It aligns the two genomes using nucmer utility from MUMmer and then orders and orients the contigs of the candidate genome guided by their alignments to the reference genome. Please send your questions and comments to mchakrab@uci.edu.

Citation https://www.nature.com/articles/s41588-017-0010-y

Address of the bookmark: https://github.com/mahulchak/mscaffolder

FMLRC: a long-read error correction tool using the multi-string Burrows Wheeler Transform

Neel — Fri, 10 Aug 2018 13:29:28 -0500

FMLRC, or FM-index Long Read Corrector, is a tool for performing hybrid correction of long read sequencing using the BWT and FM-index of short-read sequencing data. Given a BWT of the short-read sequencing data, FMLRC will build an FM-index and use that as an implicit de Bruijn graph. Each long read is then corrected independently by identifying low frequency k-mers in the long read and replacing them with the closest matching high frequency k-mers in the implicit de Bruijn graph. In contrast to other de Bruijn graph based implementations, FMLRC is not restricted to a particular k-mer size and instead uses a two pass method with both a short "k-mer" and a longer "K-mer". This allows FMLRC to correct through low complexity regions that are computational difficult for short k-mers.

Address of the bookmark: https://github.com/holtjma/fmlrc