Study of 10 tools on five datasets that such a comparative evaluation of these tools is hindered by two types of circularity: they arise due to (1) the same variants or (2) different variants from the same protein occurring both in the datasets used for training and for evaluation of these tools, which may lead to overly optimistic results. Comparative evaluations of predictors that do not address these types of circularity may erroneously conclude that circularity confounded tools are most accurate among all tools, and may even outperform optimized combinations of tools.

Following tools are useful for mis sense muation detection ... 

PolyPhen‐2 (PP2)
“Predicts possible impact of an amino acid substitution on the structure and function of a human protein using straightforward physical and comparative considerations”

MutationTaster‐2 (MT2)
“Evaluation of the disease‐causing potential of DNA sequence alterations”

MutationAssessor (MASS)
“Predicts the functional impact of amino acid substitutions in proteins, such as mutations discovered in cancer or missense polymorphisms”

LRT
“Identify a subset of deleterious mutations that disrupt highly conserved amino acids within protein‐coding sequences, which are likely to be unconditionally deleterious”

SIFT
“Predicts whether an amino acid substitution affects protein function”

GERP++
“Identifies constrained elements in multiple alignments by quantifying substitution deficits. These deficits represent substitutions that would have occurred if the element were neutral DNA, but did not occur because the element has been under functional constraint. We refer to these deficits as “rejected substitutions.” Rejected substitutions are a natural measure of constraint that reflects the strength of past purifying selection on the element”

phyloP
“Compute conservation or acceleration P values based on an alignment and a model of neutral evolution”

FatHMM unweighted (FatHMM‐U)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants”

FatHMM weighted (FatHMM‐W)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants” and its weighting scheme attributes higher tolerance scores to SNVs in proteins, related proteins, or domains that already include a high fraction of pathogenic variantsh

Combined Annotation Dependent Depletion (CADD)
“CADD is a tool for scoring the deleteriousness of single‐nucleotide variants as well as insertion/deletions variants in the human genome”

3D-Dock Suite

Global rigid search: FFTShape complementarity and electrostatics

Re-scoring and clustering. Refinement of interface side-chains

3D-Garden

Global rigid search in ensamble

Shape complementarity and Lennard–Jones potential

Side chain and backbone dihedral refinement

DOT

Global rigid search: FFTShape complementarity, electrostatics and VDWNone

Escher NG

Global rigid searchShape complementarity, hydrogen bonds and electrostatic

Integrated in VEGA

GRAMM 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potential

Clustering of conformations

GRAMM-X 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potentialminimization and re-scoring with multiple filters

HEX

Global rigid search: Fourier correlation of spherical harmonics

Shape complementarity

HADDOCK

Global rigid searchElectrostatic ,VDW and desolvation energy termsMD simulated annealing refinement . Filtering based on external data. 

ICM

Global rigid search: Monte CarloEmpirical scoring function

Clustering and selection of conformations. Refinement of interface side-chains and re-scoring

MolFit 

Global rigid search: FFTShape complementarity

Clustering of good solutions, filtering using a priori information and small, local rigid rotations around selected conformations

PatchDock

Global rigid searchShape complementarity and atomic desolvation energy

Clustering of conformations

PyDock

Global rigid search:FFTShape complementarity

rescoring by binding electrostatics and desolvation energy

RosettaDock

Local rigid search: Monte Carlo with low and high resolution structure representation levels

Different scoring parameters for the different resolutions 

ZDOCK

Global rigid search: FFTShape complementarity, desolvation energy, and electrostatics.

Energy minimization and re-scoringFree for academics

Point to note:

The proper treatment of flexibility in protein–protein docking is still an active field of research. You first should analyzed your proteins in order to define their conformational space and then choose the most suitable method for your docking problem.

Download 

http://arthropods.eugenes.org/EvidentialGene/trassembly.html

https://sourceforge.net/p/evidentialgene/blog/

Address of the bookmark: http://arthropods.eugenes.org/EvidentialGene/trassembly.html

Address of the bookmark: https://github.com/knausb/vcfR

Compare structural and functional annotations of proteins between sequenced genomes.

1. RNA-Seq Analysis Pipelines

RNA-seq is one of the most popular techniques for studying RNA. These tools streamline processing raw sequence data:

• FASTQC: For quality control of raw RNA-seq reads.
• Trimmomatic: For trimming and filtering RNA-seq reads.
• HISAT2/STAR: High-performance aligners for RNA-seq reads.
• FeatureCounts: For quantifying gene expression.
• DESeq2/EdgeR: For differential expression analysis.

2. Transcriptome Assembly and Annotation

For analyzing transcriptomes from non-model organisms or assembling novel transcripts:

• Trinity: For de novo transcriptome assembly.
• StringTie: For transcript assembly and quantification from RNA-seq alignments.
• TransDecoder: To predict coding regions within assembled transcripts.
• TAU: Tools for annotating non-coding and coding RNAs.

3. Exploring Non-Coding RNA (ncRNA)

Non-coding RNAs play critical regulatory roles. Dedicated tools for studying them include:

• Infernal: For identifying ncRNA sequences based on covariance models.
• Rfam: Database and tools for ncRNA families.
• miRDeep: For identifying microRNAs in RNA-seq datasets.

4. RNA Structure and Motif Analysis

Structural biology of RNA helps in understanding its function:

• RNAfold (ViennaRNA): Predicts secondary structures from RNA sequences.
• RNAstructure: Tools for RNA secondary structure prediction and analysis.
• MEME Suite: For identifying motifs in RNA sequences.
• IntaRNA: For RNA-RNA interaction prediction.

5. RNA Editing and Modifications

Epitranscriptomics is a growing field focusing on RNA modifications:

• REDItools: For RNA editing analysis.
• m6Aboost: For identifying m6A modifications in RNA.

6. Long-Read RNA Sequencing Analysis

Long-read technologies like Nanopore and PacBio are transforming RNA research:

• FLAIR: For isoform-level analysis of long-read RNA-seq data.
• NanoMod: For detecting modifications in RNA from Nanopore sequencing.

7. RNA-Protein Interactions

To study RNA-protein interactions and complexes:

• RBPmap: For identifying RNA-binding protein motifs.
• PARalyzer: For analyzing PAR-CLIP data.

8. Functional Enrichment Analysis

Understanding biological functions and pathways from RNA-seq data:

• getENRICH: A tool designed for pathway enrichment analysis of non-model organisms (hypergeometric P-value calculation with FDR correction).
• ClusterProfiler: For GO and KEGG pathway enrichment analysis.

9. Visualization and Data Sharing

Presenting and sharing RNA sequence analysis results effectively:

• IGV: Genome browser for visualizing RNA-seq alignments.
• Circos: Circular visualization of RNA-seq data.
• DashBio: A Python library for creating bioinformatics visualizations.

Conclusion

The bioinformatics landscape for RNA sequence analysis is vast, with tools catering to specific needs. Whether you’re studying coding RNAs, non-coding RNAs, or exploring RNA-protein interactions, the right tools can transform your data into biological insights.

• Bioconductor – A plethora of tools for analysis and comprehension of high-throughput genomic data, including 1500+ software packages. [ paper-2004 | web ]
• Biopython – Freely available tools for biological computing in Python, with included cookbook, packaging and thorough documentation. Part of the Open Bioinformatics Foundation. Contains the very useful Entrez package for API access to the NCBI databases. [ paper-2009 | web ]
• Bioconda – A channel for the conda package manager specializing in bioinformatics software. Includes a repository with 3000+ ready-to-install (with conda install) bioinformatics packages. [ paper-2018 | web ]
• BioJulia – Bioinformatics and computational biology infastructure for the Julia programming language. [ web ]
• Rust-Bio – Rust implementations of algorithms and data structures useful for bioinformatics. [ paper-2016 ]
• SeqAn – The modern C++ library for sequence analysis.

Following are the list of standalone applications for network analysis:

Arena 3D

3D visualization of multi-layer networks

http://www.arena3d.org

Biana

Data integration and network management

http://sbi.imim.es/web/BIANA.php

BioLayout Express 3D 

2D/3D network visualization

http://www.biolayout.org/

BiologicalNetworks 

Efficient integrated multi-level analysis of microarray, sequence, regulatory and other data

http://www.biologicalnetworks.org

BioMiner

Modeling, analyzing and visualizing biochemical pathways and networks

http://www.zbi.uni-saarland.de/chair/projects/BioMiner

Cell Illustrator 

Petri nets for modeling and simulating biological networks

http://www.cellillustrator.com

COPASI

Analysis of biochemical networks and their dynamics

http://www.copasi.org/

Cytoscape 

Network visualization and analysis. Over 200 plugins [60]

http://www.cytoscape.org/

Dizzy

Chemical kinetics stochastic simulation software

http://magnet.systemsbiology.net/software/Dizzy/

DyCoNet

Gephi plugin that can be used to identify dynamic communities in networks

https://github.com/juliemkauffman/DyCoNet

GENeVis 

Network and pathway visualization

http://tinyurl.com/genevis/

GEPHI 

Interactive visualization and exploration for any network and complex system, dynamic and hierarchical graph.

https://gephi.org

Igraph

Collection of network analysis tools with the emphasis on efficiency, portability and ease of use

http://igraph.sourceforge.net

Medusa

Semantic and multi-edged simple networks

https://sites.google.com/site/medusa3visualization/

NAViGaTOR

Visualizing and analyzing protein-protein interaction networks

http://tinyurl.com/navigator1/

N-Browse

Interactive graphical browser for biological networks

http://www.gnetbrowse.org/

NeAT

Topological and clustering analysis of networks

http://rsat.ulb.ac.be/neat/

Ondex 

Data integration and visualization of large networks

http://www.ondex.org/

Osprey

Visualization and annotation of biological networks

http://biodata.mshri.on.ca/osprey/servlet/Index

Pajek 

Analysis and visualization of large networks and social network analysis

http://vlado.fmf.uni-lj.si/pub/networks/pajek/

PathwayAssist 

Navigation and analysis of biological pathways, gene regulation networks and protein interaction maps.

http://www.ariadnegenomics.com/downloads/

PIVOT 

Layout algorithms for visualizing protein interactions and families

http://acgt.cs.tau.ac.il/pivot/

ProCope 

Prediction and evaluation of protein complexes from purification data experiments

http://www.bio.ifi.lmu.de/Complexes/ProCope/

ProViz 

Visualization and exploration of interaction networks. Gene Ontology and PSI-MI formats supported

http://cbi.labri.fr/eng/proviz.htm

SpectralNET 

Network analysis and visualizations. Scatter plots and dimensionality reduction algorithms

https://www.broadinstitute.org/software/spectralnet

Tulip 

Enables the development of algorithms, visual encodings, interaction techniques, data models and domain-specific visualizations

http://tulip.labri.fr/TulipDrupal/

VANESA 

Automatic reconstruction and analysis of biological networks and Petri nets based on life-science database information

http://agbi.techfak.uni-bielefeld.de/vanesa/

VANTED 

Network reconstruction, data visualization, integration of various data types, network simulation

http://tinyurl.com/vanted/

yEd

Creation of diagrams manually and import external data

http://tinyurl.com/yEdGraph/

Web tools for network analysis

APID 

Unified protein-protein interactions from BIND, BioGRID, DIP, HPRD, IntAct and MINT

http://bioinfow.dep.usal.es/apid/

Arcadia 

Translates text-based descriptions of biological networks (SBML files) into standardized diagrams (Systems Biology Graphical Notation Process Description maps)

http://arcadiapathways.sourceforge.net/

AVIS 

Viewer for signaling networks

http://actin.pharm.mssm.edu/AVIS2

bioPIXIE 

Discovery of biological networks from diverse functional genomic data

http://pixie.princeton.edu/pixie

CellPublisher

Interactive representations of biochemical processes

http://cellpublisher.gobics.de/

Graphle

Distributed network exploration and visualization of interactive large, dense graphs

http://tinyurl.com/graphle/

GraphWeb 

Web server for graph-based analysis of biological networks

http://biit.cs.ut.ee/graphweb/

Hubba

Web-based service to explore the essential nodes in a network

http://hub.iis.sinica.edu.tw/Hubba

NetworkBLAST 

Analysis of protein interaction networks across species to infer protein complexes that are conserved in evolution

http://www.cs.tau.ac.il/~bnet/networkblast.htm

Pathview 

Tool set for pathway-based data integration and visualization

http://Pathview.r-forge.r-project.org/

PINA 

Integrated platform for protein interaction network construction, filtering, analysis, visualization and management

http://cbg.garvan.unsw.edu.au/pina/home.do

ReMatch 

Web-based tool for integration of user-given stoichiometric metabolic models into a database collected from public data sources

http://www.cs.helsinki.fi/group/sysfys/software/rematch/

SNOW 

Gene mapping on a reference or human protein-protein interaction network that SNOW hosts

http://snow.bioinfo.cipf.es

STITCH 

Resource to explore known and predicted interactions of chemicals and proteins

http://stitch.embl.de/

STRING

Protein interaction networks and integration of data such as genomic context, high-throughput experiments, conserved coexpression and previous knowledge derived from the literature

http://string-db.org

TVNViewer 

An interactive visualization tool for exploring networks that change over time or space

http://www.sailing.cs.cmu.edu/main/?page_id=545

tYNA 

System for managing, comparing and mining multiple networks

http://tyna.gersteinlab.org/tyna/

VisANT 

Visualization, mining, analysis and modeling of biological networks, metabolic networks and ecosystems

http://visant.bu.edu/

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.