More at https://www.biorxiv.org/content/10.1101/2024.06.03.597269v1

Address of the bookmark: https://github.com/TravisWheelerLab/ULTRA

Address of the bookmark: https://github.com/b-brankovics/grabb

SyRI, a pairwise whole-genome comparison tool for chromosome-level assemblies. SyRI starts by finding rearranged regions and then searches for differences in the sequences, which are distinguished for residing in syntenic or rearranged regions. This distinction is important as rearranged regions are inherited differently compared to syntenic regions.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-019-1911-0

Address of the bookmark: https://github.com/schneebergerlab/syri

Following are the list of Ancestral /sequence/ reconstruction (ASR) tools: 

inferCars

Reconstructs contiguous regions of an ancestral genome. Given information about adjacencies between conserved segments in each modern species, our goal is to infer segment order in the ancestral genome. To get a clean and precise statement of the problem, we formalize it using graph theory. We develop an algorithm that identifies a most parsimonious scenario for the history of each individual adjacency, although the whole-genome prediction is not guaranteed to optimize traditional measures like the number of breakpoints. We introduce weights to the graph edges to model the reliability of each adjacency.

ANGES:reconstructing ANcestral GEnomeS maps

A suite of Python programs that allows reconstructing ancestral genome maps from the comparison of the organization of extant-related genomes. ANGES can reconstruct ancestral genome maps for multichromosomal linear genomes and unichromosomal circular genomes. It implements methods inspired from techniques developed to compute physical maps of extant genomes.

Cocos

Constructs phylogenies of multi-domain proteins. With a given species tree and domain phylogenies, the procedure infers the composition of ancestral multi-domain proteins. Cocos implements and extend a suggested algorithmic approach by Behzadi and Vingron in an easy-to-use program. Such method could be applied to reconstruction of partial homologous units such as bacterial operons or protein complexes.

MySSP

Constructs an initial DNA sequence at the root of the tree and simulates evolution across the tree using a variety of common models of DNA evolution. MySSP is a program for the simulation of DNA sequence evolution across a phylogenetic tree. It is designed for large-scale studies, including simulation of multiple replicates and outputs sequences into NEXUS, MEGA, or FASTA formats. MySSP has a fairly simple graphical user interface (GUI) for basic use, but also has a specialized batch script interpreter to allow for more complicated or large-scale simulations.

PARANA: Parsimonious Ancestral Reconstruction And Network Analysis

Performs parsimony based inference of ancestral biological networks. Given multiple extant networks and phylogenetic information relating extant nodes, PARANA finds a parsimonious set of ancestral interaction events (edge gains and losses) which explain the extant networks. The framework adopted by PARANA is able to represent network evolution under models that support gene duplication and loss and independent interaction gain and loss. The method works on both directed and undirected networks and can incorporate asymmetric interaction gain and loss costs. In contrast to previous approaches, PARANA does not require knowing the relative ordering of unrelated duplication events and thus, works on phylogenetic trees even where branch lengths are not provided.

GapAdj: Gapped Adjacencies

A synteny-based method that is flexible enough to handle a model of evolution involving whole genome duplication events, in addition to rearrangements, gene insertions, and losses. Ancestral relationships between markers are defined in term of Gapped Adjacencies, i.e. pairs of markers separated by up to a given number of markers. It improves on a previous restricted to direct adjacencies, which revealed a high accuracy for adjacency prediction, but with the drawback of being overly conservative, i.e. of generating a large number of contiguous ancestral regions (CARs).

ANCESTOR

A web server allowing one to easily and quickly perform the last three steps of the ancestral genome reconstruction procedure. Ancestors implements several alignment algorithms, an indel maximum likelihood solver and a context-dependent maximum likelihood substitution inference algorithm. The results presented by the server include the posterior probabilities for the last two steps of the ancestral genome reconstruction and the expected error rate of each ancestral base prediction.

ProCARs

Reconstructs ancestral gene orders as contiguous ancestral regions (CARs) with a progressive homology-based method. ProCARs runs from a phylogeny tree (without branch lengths needed) with a marked ancestor and a block file. This homology-based method is based on iteratively detecting and assembling ancestral adjacencies, while allowing some micro-rearrangements of synteny blocks at the extremities of the progressively assembled CARs. The method starts with a set of blocks as the initial set of CARs, and detects iteratively the potential ancestral adjacencies between extremities of CARs, while building up the CARs progressively by adding, at each step, new non-conflicting adjacencies that induce the less homoplasy phenomenon. The species tree is used, in some additional internal steps, to compute a score for the remaining conflicting adjacencies, and to detect other reliable adjacencies, in order to reach completely assembled ancestral genomes.

FastML

A user-friendly tool for the reconstruction of ancestral sequences. FastML implements various novel features that differentiate it from existing tools: (i) FastML uses an indel-coding method, in which each gap, possibly spanning multiples sites, is coded as binary data. FastML then reconstructs ancestral indel states assuming a continuous time Markov process. FastML provides the most likely ancestral sequences, integrating both indels and characters; (ii) FastML accounts for uncertainty in ancestral states: it provides not only the posterior probabilities for each character and indel at each sequence position, but also a sample of ancestral sequences from this posterior distribution, and a list of the k-most likely ancestral sequences; (iii) FastML implements a large array of evolutionary models, which makes it generic and applicable for nucleotide, protein and codon sequences; and (iv) a graphical representation of the results is provided, including, for example, a graphical logo of the inferred ancestral sequences.

maxAlike

Reconstructs a genomic sequence for a specific taxon based on sequence homologs in other species. The input is a multiple sequence alignment and a phylogenetic tree that also contains the target species. For this target species, the algorithm computes nucleotide probabilities at each sequence position. Consensus sequences are then reconstructed based on a certain confidence level.

MLGO: Maximum Likelihood for Gene Order Analysis

A web tool for the reconstruction of phylogeny and/or ancestral genomes from gene-order data. MLGO was designed for analysis of large-scale genomic changes including not only rearrangements but also gene insertions, deletions and duplications. MLGO can be used to infer a phylogeny from genome rearrangement and gene order data, and can also obtain an estimation of ancestral genomes, given an input tree. MLGO takes the advantage of binary encoding on gene-order data, supports a fairly general model of genomic evolution (rearrangements plus duplications, insertions, and losses of genomic regions), and successfully accommodates itself into the framework of maximized likelihood.

Image Reference : Wiki

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq

Link to working demo: https://vgteam.github.io/sequenceTubeMap/

Address of the bookmark: https://github.com/vgteam/sequenceTubeMap

The pipeline is open-source and hosted in a public Bitbucket repository.

Address of the bookmark: https://tritexassembly.bitbucket.io/

By default, Kaiju uses either the available complete genomes from NCBI RefSeq or the microbial subset of the non-redundant protein database nr used by NCBI BLAST, optionally also including fungi and microbial eukaryotes.

Kaiju translates reads into amino acid sequences, which are then searched in the database using a modified backward search on a memory-efficient implementation of the Burrows-Wheeler transform, which finds maximum exact matches (MEMs), optionally allowing mismatches in the protein alignment. The search can process up to millions of reads per minute using, for example, only 10 GB RAM with a protein database comprising 4821 microbial genomes. Kaiju can also be used for querying any other protein database without taxonomic classification, using either protein or nucleotide queries.

Kaiju is described in Menzel, P. et al. (2016) Fast and sensitive taxonomic classification for metagenomics with Kaiju. Nat. Commun. 7:11257 (open access).

Address of the bookmark: http://kaiju.binf.ku.dk/

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

• Uncover missing heritability linked to structural variation
• Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
• Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled! 

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool 

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

• Unified variant calling user interface with built-in cluster compute support
• Small indel calling (2-49 bp)
• Improved inversion calling (screenInversions)
• Quality metric for SV calls based on number of local assemblies supporting each call
• Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
• Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller