BOL: Related items

Chemical Elements of Bioinformatics

Rahul Agarwal — Tue, 03 Sep 2013 16:35:39 -0500

You must be familiar with periodic table and colour pattern, but this time you are going to amaze by new elements table by Eagle genomics. Just check it out and have fun :)

http://elements.eaglegenomics.com/

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

HISAT2: a fast and sensitive alignment program for mapping next-generation sequencing reads

Rahul Nayak — Tue, 08 May 2018 04:27:22 -0500

HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) to a population of human genomes (as well as to a single reference genome). Based on an extension of BWT for graphs [Sirén et al. 2014], we designed and implemented a graph FM index (GFM), an original approach and its first implementation to the best of our knowledge. In addition to using one global GFM index that represents a population of human genomes, HISAT2 uses a large set of small GFM indexes that collectively cover the whole genome (each index representing a genomic region of 56 Kbp, with 55,000 indexes needed to cover the human population). These small indexes (called local indexes), combined with several alignment strategies, enable rapid and accurate alignment of sequencing reads. This new indexing scheme is called a Hierarchical Graph FM index (HGFM).

more at https://ccb.jhu.edu/software/hisat2/index.shtml

Address of the bookmark: https://github.com/infphilo/hisat2

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

List of tools frequently used while genome assembly

BioStar — Tue, 22 Jan 2019 09:39:02 -0600

List of tools frequently used while genome assembly:

I have used the following assemblers

Spades (v. 3.10.1)
CANU (v. 1.6)
Unicycler (v. v0.4.1)
Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

minimap2 (v. 2.0rc1-r232)
minimap (v. 0.2-r124-dirty)
bwa (v. 0.7.12-r1039)

I have used the following polishing tools

Racon (v. not available)
Pilon (v. 1.18)
Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

ANI.pl (https://github.com/chjp/ANI)
CheckM (v. 1.0.7)
Prokka (v. 1.12)
QUAST (v. 2.3)
mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

Dahak: benchmarking and containerization of tools for analysis of complex non-clinical metagenomes.

BioStar — Thu, 09 Apr 2020 04:56:09 -0500

Dahak is a software suite that integrates state-of-the-art open source tools for metagenomic analyses. Tools in the dahak software suite will perform various steps in metagenomic analysis workflows including data pre-processing, metagenome assembly, taxonomic and functional classification, genome binning, and gene assignment. We aim to deliver the analytical framework as a robust and reliable containerized workflow system, which will be free from dependency, installation, and execution problems typically associated with other open-source bioinformatics solutions. This will maximize the transparency, data provenance (i.e., the process of tracing the origins of data and its movement through the workflow), and reproducibility.

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

Frequent parameters for bioinformatics tools !

BioStar — Tue, 27 Oct 2020 19:42:32 -0500

Third party executable parameters and options.

Trimmomatic

“ILLUMINACLIP:...:2:30:10”

“LEADING:15”

“TRAILING:15”

“SLIDINGWINDOW:4:20”

“MINLEN:20”

“TOPHRED33”

Filtlong

--min_length 500

--min_mean_q 85

--min_window_q 65

FastQ Screen

--aligner bowtie2' (bwa for PacBio)

--subset 1000 (for PacBio)

SPAdes

--careful

--disable-gzip-output

--cov-cutoff auto

--phred-offset 33

HGAP

Pbalign.task_options.min_accuracy: 70

Pbalign.task_options.no_split_subreads: false

Genomic_consensus.task_options.min_confidence: 40

falcon_ns.task_options.HGAP_GenomeLength_str:

6000000

Pbcoretools.task_options.read_length: 0

Genomic_consensus.task_options.use_score: 0

Pbalign.task_options.min_length: 50

Pbalign.task_options.algorithm_options: --minMatch 12

--bestn 10 --minPctSimilarity 70.0

Pbalign.task_options.hit_policy: randombest

Pbcoretools.task_options.other_filters: rq >= 0.7

Pbalign.task_options.concordant: false

Genomic_consensus.task_options.min_coverage: 5

falcon_ns.task_options.HGAP_SeedCoverage_str: 30

falcon_ns.task_options.HGAP_AggressiveAsm_bool: false

Genomic_consensus.task_options.algorithm: best

falcon_ns.task_options.HGAP_SeedLengthCutoff_str: -1

Genomic_consensus.task_options.diploid: false

MeDuSa

-random 100

Prokka

--usegenus

--force

--addgenes

--rfam

--rawproduct

cmsearch (taxonomy, 16S)

--rfam

--noali

blastn (taxonomy, 16S)

-evalue 1E-10

blastn (MLST)

-ungapped

-dust no

-evalue 1E-20

-word_size 32

-culling_limit 2

-perc_identity 95

blastp (VF)

-culling_limit 2

RGI (ABR)

--input_type contig

bowtie2 (mapping)

--sensitive

minimap2 (mapping)

-a

-x map-ont

samtools mpileup (SNP detection)

-uRI

bcftools call (SNP detection)

--variants-only

--skip-variants indels

--output-type v

--ploidy 1

-c

SNPsift filter (SNP detection)

"( QUAL >= 30 ) & (( na FILTER ) | (FILTER = 'PASS')) &

( DP >= 20 ) & ( MQ >= 20 )"

SNPeff ann (SNP detection)

-nodownload

-no-intron

-no-downstream

-no SPLICE_SITE_REGION

-upDownStreamLen 250

bcftools consensus

(phylogenetic tree)

--haplotype 1

fasttreemp

-nt

-boot 100

roary

-e

-n

-cd 100

-g 100000

Bioinformatics tools for telomere to telomere assembly !

BioStar — Tue, 17 Aug 2021 13:17:09 -0500

● Merfin – k-mer-based assembly and variant calling evaluation for improved consensus accuracy (Arang Rhie)
● PanGenie – algorithm that leverages a pangenome reference built from haplotype-resolved genome assemblies in conjunction with k-mer count information from raw, short-read sequencing data to genotype a wide spectrum of genetic variation (Tobias Marschall)
● SQANTI3 – an automated pipeline for the classification of long-read transcripts that can assess the quality of data and the preprocessing pipeline (Rocío Amorín de Hegedüs @rocioadh)
● tama (Transcriptome Annotation by Modular Algorithms) – software designed for processing Iso-Seq data and other long-read transcriptome data (Richard Kuo @GenomeRIK)
● pbaa (PacBio Amplicon Analysis) – separates complex mixtures of amplicon targets from genomic samples to cluster and generate high-quality consensus sequences from HiFi reads (Zev Kronenberg @zevkronenberg)
● bellerophon – analyzes MHC typing and other low-complexity gene amplicon data; performs allele calling while detecting polymorphic sites within the sequences and removing potential chimeric sequence variants (Yuanyuan Cheng @Yuanyuan929)
● svpack – tools for filtering, comparing, and annotating structural variant (SV) calls in VCF format (Aaron Wenger)
● JumboDB – tool for de Bruijn graph construction (Anton Bankevich @AntonBankevich)
● uLTRA – tool for splice alignment of long transcriptomic reads to a genome, guided by a database of exon annotations. (Kristoffer Sahlin @krsahlin)
● LeafGo – workflow to rapidly produce high-quality de novo plant genomes (Luca Ermini @ermini_luca)

Reference:

https://www.pacb.com/blog/young-investigators-share-stellar-science-career-advice-and-bioinformatics-tools-at-smrt-leiden-2021/

Comparative genomics visualisation tools !

Neel — Thu, 17 Feb 2022 05:37:55 -0600

Comparative genomics visualisation tools !

Address of the bookmark: https://cmdcolin.github.io/awesome-genome-visualization/?latest=true&selected=%23BRIG&tag=Comparative

BioKit: a set of tools dedicated to bioinformatics, data visualisation

Neel — Tue, 18 Jun 2024 02:04:39 -0500

BioKit is a set of tools dedicated to bioinformatics, data visualisation (biokit.viz), access to online biological data (e.g. UniProt, NCBI thanks to bioservices). It also contains more advanced tools related to data analysis (e.g., biokit.stats). Since R is quite common in bioinformatics, we also provide a convenient module to run R inside your Python scripts or shell (:mod:biokit.rtools module).

Address of the bookmark: https://biokit.readthedocs.io/en/latest/index.html