BOL: Related items

Nanopore adaptor !

Jit — Mon, 03 Feb 2020 00:10:29 -0600

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

The known Nanopore adapters that Porechop looks for are defined

https://github.com/rrwick/Porechop/blob/master/porechop/adapters.py

They are:

Ligation kit adapters
Rapid kit adapters
PCR kit adapters
Barcodes
Native barcoding
Rapid barcoding

Address of the bookmark: https://github.com/rrwick/Porechop/blob/master/porechop/adapters.py

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Cerulean: A hybrid assembly using high throughput short and long reads

Rahul Nayak — Tue, 05 Jun 2018 10:10:15 -0500

Cerulean extends contigs assembled using short read datasets like Illumina paired-end reads using long reads like PacBio RS long reads. Cerulean v0.1 has been implemented with bacterial genomes in mind. The method is fully described in Deshpande, V., Fung, E. D., Pham, S., & Bafna, V. (2013). Cerulean: A hybrid assembly using high throughput short and long reads. arXiv preprint arXiv:1307.7933. http://arxiv.org/abs/1307.7933

Address of the bookmark: https://sourceforge.net/projects/ceruleanassembler/

NanoPack: visualizing and processing long-read sequencing data

Jit — Fri, 10 Aug 2018 18:41:34 -0500

The NanoPack tools are written in Python3 and released under the GNU GPL3.0 License. The source code can be found at https://github.com/wdecoster/nanopack, together with links to separate scripts and their documentation. The scripts are compatible with Linux, Mac OS and the MS Windows 10 subsystem for Linux and are available as a graphical user interface, a web service at http://nanoplot.bioinf.be and command line tools.

https://academic.oup.com/bioinformatics/article/34/15/2666/4934939

Address of the bookmark: https://github.com/wdecoster/nanoQC

Nieduszynski Group

Fri, 26 Sep 2014 19:35:06 -0500

Complete, accurate replication of the genome is essential for life. All chromosomes in eukaryotic cells must be duplicated and then segregated to daughter cells to ensure genetic integrity and produce the large number of cells that make up a multicellular organism. We are using genetic, genomic and computational methods to understand how chromosome replication is regulated to ensure genome stability. By focusing on the basic biology that underpins cell growth and division we aim to provide new insights that may help our understanding of diseases such as cancer and congenital disorders.

More http://www.nieduszynski.org/index.php
http://www.path.ox.ac.uk/research/cell-biology-and-pathology/conrad-nieduszynski-group

orthodotter: Synteny plots (oxford grid)

Jit — Wed, 09 Aug 2017 07:16:16 -0500

orthodotter -h
--------------------------------------------------------------------------------
orthodotter - Plot orthologous genes on an oxford grid.
       -f      : input file, containing orthologous genes, default is stdin
                       species chr-name start end species chr-name start end
       -toPlot  : give the x and y sets and the color separated by double-dots,
                       for example set1:set2:red will plot set1 on x, set2 on y with
                       red points. Could give several -toPlot arguments.
                       To launch the clustering of dots, use extra-option 1=dist,min_nb_genes
                       where dist is the minimal distance (euclidian) between two points and min_nb_genes the minimal
                       number of genes in a cluster to be valid.
       -o      : output file, default is stdout
       -x       : resolution of x axis, default is 600
       -y       : resolution on y axis, default is 600
       -r       : radius of circle representing orthologous genes
       -format       : could be png, gif, jpg, pdf or ps. Default is png.
       -fg           : foreground color, default is black
       -bg           : background color, default is transparent
       -fSize   : fontSize, default is 1
       -filter       : check chromosome names
       -h            : help
--------------------------------------------------------------------------------
orthodotter -f Vigne_Banane.ortho -toPlot Vigne:Banane:black:1=10,5 -x 1200 -y 1200 -bg white -o Vigne_vs_Banane.png > Vigne_vs_Banane.clusters
--------------------------------------------------------------------------------

Address of the bookmark: https://github.com/institut-de-genomique/orthodotter

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data

Rahul Nayak — Mon, 13 Nov 2017 05:10:23 -0600

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data
AfterQC can simply go through all fastq files in a folder and then output three folders: good, bad and QC folders, which contains good reads, bad reads and the QC results of each fastq file/pair.
Currently it supports processing data from HiSeq 2000/2500/3000/4000, Nextseq 500/550, MiniSeq...and other Illumina 1.8 or newer formats

Address of the bookmark: https://github.com/OpenGene/AfterQC

FQC Dashboard: Integrates FastQC results into a web-based, interactive, and extensible FASTQ quality control tool

Shruti Paniwala — Tue, 10 Nov 2020 01:30:22 -0600

FQC is software that facilitates quality control of FASTQ files by carrying out a QC protocol using FastQC, parsing results, and aggregating quality metrics into an interactive dashboard designed to richly summarize individual sequencing runs. The dashboard groups samples in dropdowns for navigation among the data sets, utilizes human-readable configuration files to manipulate the pages and tabs, and is extensible with CSV data.

Address of the bookmark: https://github.com/pnnl/fqc

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

Ktrim: an extra-fast and accurate adapter- and quality-trimmer for sequencing data

Jit — Thu, 11 Feb 2021 21:39:05 -0600

Ktrim is written in C++ for GNU Linux/Unix platforms. After uncompressing the source package, you can find an executable file ktrim under bin/ directory compiled using g++ v4.8.5 and linked with libz v1.2.7 for Linux x86_64 system. If you could not run it (which is usually caused by low version of libc++ or libz library) or you want to build a version optimized for your system, you can re-compile the programs:

user@linux$ make clean && make

Address of the bookmark: https://github.com/hellosunking/Ktrim