BOL: Related items

Supernova: generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Jit — Sun, 31 May 2020 01:59:30 -0500

Supernova generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

PBSuite: Software for Long-Read Sequencing Data from PacBio

Jit — Mon, 27 Feb 2017 09:54:47 -0600

PBJelly - the genome upgrading tool.
PBHoney - the structural variation discovery tool

Both are contained within the PBSuite code found in downloads.

----- PBJelly -----
Read The Paper
http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0047768

PBJelly is a highly automated pipeline that aligns long sequencing reads (such as PacBio RS reads or long 454 reads in fasta format) to high-confidence draft assembles. PBJelly fills or reduces as many captured gaps as possible to produce upgraded draft genomes.

----- PBHoney -----
Read The Paper
http://www.biomedcentral.com/1471-2105/15/180/abstract

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Address of the bookmark: https://sourceforge.net/projects/pb-jelly/

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

BIGMAC : breaking inaccurate genomes and merging assembled contigs for long read metagenomic assembly

Jit — Mon, 22 May 2017 05:43:51 -0500

This tool is for users to upgrade their metagenomics assemblies using long reads. This includes fixing mis-assemblies and scaffolding/gap-filling. If you encounter any issues, please contact me at kklam@eecs.berkeley.edu. My name is Ka-Kit Lam.

https://github.com/kakitone/MetaFinisherSC

https://github.com/kakitone/BIGMAC

Address of the bookmark: https://github.com/kakitone/BIGMAC

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

Consed--A Finishing Package (BAM File Viewer, Assembly Editor, Autofinish, Autoreport, Autoedit, and Align Reads To Reference Sequence)

Neel — Fri, 07 Feb 2020 07:16:22 -0600

Supports Illumina, 454, other Next-Gen and Sanger Reads and allows mixtures of these read types
Consed includes BamScape which can view bam files with unlimited numbers of reads. BamScape can bring up consed to edit reads and the reference sequence in targeted regions.
Consed is compatible with Newbler, Cross_match, Phrap, MIRA, Velvet and PCAP output.
Quickly takes the user to each variant site for viewing (also available as an automated report)
Overview of assembly can help detect and fix misassemblies
Editing time reduced by the program's ability to pin-point problem areas
Editing is guided by error probabilities

Address of the bookmark: http://www.phrap.org/consed/consed.html

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Rahul Nayak — Sat, 06 Jul 2019 03:48:22 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye