BOL: Related items

BFC: a standalone high-performance tool for correcting sequencing errors from Illumina sequencing data

Jit — Thu, 31 May 2018 09:35:23 -0500

BFC is a standalone high-performance tool for correcting sequencing errors from Illumina sequencing data. It is specifically designed for high-coverage whole-genome human data, though also performs well for small genomes. The BFC algorithm is a variant of the classical spectrum alignment algorithm introduced by Pevzner et al (2001). It uses an exhaustive search to find a k-mer path through a read that minimizes a heuristic objective function jointly considering penalties on correction, quality and k-mer support. This algorithm was first implemented in my fermi assembler and then refined a few times in fermi, fermi2 and now in BFC. In the k-mer counting phase, BFC uses a blocked bloom filter to filter out most singleton k-mers and keeps the rest in a hash table (Melsted and Pritchard, 2011). The use of bloom filter is how BFC is named, though other correctors such as Lighter and Bless actually rely more on bloom filter than BFC. https://github.com/lh3/bfc

Address of the bookmark: https://github.com/lh3/bfc

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

Ktrim: an extra-fast and accurate adapter- and quality-trimmer for sequencing data

Jit — Thu, 11 Feb 2021 21:39:05 -0600

Ktrim is written in C++ for GNU Linux/Unix platforms. After uncompressing the source package, you can find an executable file ktrim under bin/ directory compiled using g++ v4.8.5 and linked with libz v1.2.7 for Linux x86_64 system. If you could not run it (which is usually caused by low version of libc++ or libz library) or you want to build a version optimized for your system, you can re-compile the programs:

user@linux$ make clean && make

Address of the bookmark: https://github.com/hellosunking/Ktrim

Apollo: A Sequencing-Technology-Independent, Scalable, and Accurate Assembly Polishing Algorithm

BioStar — Mon, 16 Mar 2020 10:09:26 -0500

Apollo is an assembly polishing algorithm that attempts to correct the errors in an assembly. It can take multiple set of reads in a single run and polish the assemblies of genomes of any size. Described by Firtina et al. (preliminary version at https://arxiv.org/pdf/1902.04341.pdf

More at https://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btaa179/5804978?rss=1

Address of the bookmark: https://github.com/CMU-SAFARI/Apollo

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

cutadapt

Radha Agarkar — Fri, 13 May 2016 04:54:50 -0500

Cutadapt finds and removes adapter sequences, primers, poly-A tails and other types of unwanted sequence from your high-throughput sequencing reads.

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/