BOL: Related items

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Rahul Agarwal — Mon, 06 Jul 2015 08:46:53 -0500

GraphMap is a novel mapper targeted at aligning long, error-prone third-generation sequencing data.
It is designed to handle Oxford Nanopore MinION 1d and 2d reads with very high sensitivity and accuracy, and also presents a significant improvement over the state-of-the-art for PacBio read mappers.

GraphMap was also designed for ease-of-use: the default parameters can handle a wide range of read lengths and error profiles, including: Illumina, PacBio and Oxford Nanopore.
This is an especially important feature for technologies where the error rates and error profiles can vary widely across, or even within, sequencing runs.

http://biorxiv.org/content/early/2015/06/10/020719

Address of the bookmark: https://github.com/isovic/graphmap

Bioinformatics tools developed for Oxford Nanopore data analysis !

biogeek — Wed, 27 Dec 2017 20:47:30 -0600

MinION is the only portable real-time device for DNA and RNA sequencing. Each consumable flow cell can now generate 10–20 Gb of DNA sequence data. Ultra-long read lengths are possible (hundreds of kb) as you can choose your fragment length. One of the technical advantages of ONT data is the read length, which offers great prospects for genome assembly. Generally, assemblers are based on several different types of algorithms, such as greedy, overlap-layout-consensus (OLC), de Bruijn graph (DBG), and string graph.

List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Unicycler: Hybrid assembly pipeline for bacterial genomes

Jit — Fri, 10 Nov 2017 03:58:27 -0600

Unicycler is an assembly pipeline for bacterial genomes. It can assemble Illumina-only read sets where it functions as a SPAdes-optimiser. It can also assembly long-read-only sets (PacBio or Nanopore) where it runs a miniasm+Racon pipeline. For the best possible assemblies, give it both Illumina reads and long reads, and it will conduct a hybrid assembly.

Address of the bookmark: https://github.com/rrwick/Unicycler

String graph based genome assembly software and tools !

Rahul Nayak — Tue, 19 Dec 2017 17:17:38 -0600

In graph theory, a string graph is an intersection graph of curves in the plane; each curve is called a "string". String graphs were first proposed by E. W. Myers in a 2005 publication. In recent Genome Research paper describing an innovative approach for assembling large genomes from NGS data caught our attention for several reasons. i) it give different "string graph" prospective of long lasting genome assembly problem ii) the paper is coauthored by Jared Simpson, the developer of ABySS assembler and Richard Durbin. iii) Simpson-Durbin algorithm is that it does not rely on de Bruijn graphs, and instead employs a different graph construction approach called ‘string graph’.

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4. BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin

Genome assembly stats plotting

Jit — Wed, 28 Feb 2018 03:45:39 -0600

A de novo genome assembly can be summarised b

y a number of metrics, including:

Overall assembly length
Number of scaffolds/contigs
Length of longest scaffold/contig
Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
CEGMA completeness
Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

HaploMerger2: rebuilding both haploid sub-assemblies from high-heterozygosity diploid genome assembly

BioStar — Thu, 27 Sep 2018 07:08:47 -0500

HM2 can process any diploid assemblies, but it is especially suitable for diploid assemblies with high heterozygosity (≥3%), which can be difficult for other tools. This pipeline also implements flexible and sensitive assembly error detection, a hierarchical scaffolding procedure and a reliable gap-closing method for haploid sub-assemblies.

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/