Address of the bookmark: https://github.com/fenderglass/Flye

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

We have developed panHiTE, a comprehensive and accurate pipeline for TE detection in large-scale population genomes. It has been successfully applied to hundreds of plant population genomes, demonstrating its effectiveness and scalability.

For detailed instructions, please refer to the panHiTE tutorial.

Address of the bookmark: https://github.com/CSU-KangHu/HiTE

Address of the bookmark: https://github.com/CMU-SAFARI/SneakySnake

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4.  BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin

y a number of metrics, including:

• Overall assembly length
• Number of scaffolds/contigs
• Length of longest scaffold/contig
• Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
• CEGMA completeness
• Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

This script has been modified by others to convert InDels as well, e.g. this by David Eccles

./vcf2fq.pl -f <input.fasta> <all-site.vcf> > <output.fastq>

https://github.com/gringer/bioinfscripts/blob/master/vcf2fq.pl

https://github.com/lh3/samtools/blob/master/bcftools/vcfutils.pl

QUAST-LG is included in the QUAST  package starting from version 5.0.0 (download the latest release). Run QUAST as usual and do not forget to add ‐‐large option to your command!

A short list of the new features (see CHANGES for all):

• Significant speedup achieved by both use of new fast aligner (minimap2) and the refactoring of alignment analyzing modules
• New k-mer-based completeness and correctness metrics
• BUSCO added for enhanced reference-free analysis
• The concept of upper bound assembly (theoretical limits on the assembly completeness and contiguity for a given genome and set of reads)

Address of the bookmark: http://cab.spbu.ru/software/quast-lg/

I have used the following assemblers

• Spades (v. 3.10.1)
• CANU (v. 1.6)
• Unicycler (v. v0.4.1)
• Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

• minimap2 (v. 2.0rc1-r232)
• minimap (v. 0.2-r124-dirty)
• bwa (v. 0.7.12-r1039)

I have used the following polishing tools

• Racon (v. not available)
• Pilon (v. 1.18)
• Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

• ANI.pl (https://github.com/chjp/ANI)
• CheckM (v. 1.0.7)
• Prokka (v. 1.12)
• QUAST (v. 2.3)
• mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.