BOL: Related items

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

QuorUM: An Error Corrector for Illumina Reads

Jit — Wed, 08 Nov 2017 11:40:41 -0600

Illumina Sequencing data can provide high coverage of a genome by relatively short (most often 100 bp to 150 bp) reads at a low cost. Even with low (advertised 1%) error rate, 100 × coverage Illumina data on average has an error in some read at every base in the genome. These errors make handling the data more complicated because they result in a large number of low-count erroneous k-mers in the reads. However, there is enough information in the reads to correct most of the sequencing errors, thus making subsequent use of the data (e.g. for mapping or assembly) easier. Here we use the term “error correction” to denote the reduction in errors due to both changes in individual bases and trimming of unusable sequence. We developed an error correction software called QuorUM. QuorUM is mainly aimed at error correcting Illumina reads for subsequent assembly. It is designed around the novel idea of minimizing the number of distinct erroneous k-mers in the output reads and preserving the most true k-mers, and we introduce a composite statistic π that measures how successful we are at achieving this dual goal. We evaluate the performance of QuorUM by correcting actual Illumina reads from genomes for which a reference assembly is available.

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

QuorUM: An Error Corrector for Illumina Reads

BioStar — Tue, 04 Feb 2020 23:26:55 -0600

We produce trimmed and error-corrected reads that result in assemblies with longer contigs and fewer errors. We compared QuorUM against several published error correctors and found that it is the best performer in most metrics we use. QuorUM is efficiently implemented making use of current multi-core computing architectures and it is suitable for large data sets (1 billion bases checked and corrected per day per core)

Address of the bookmark: http://www.genome.umd.edu/

The "Ifs" and "Buts" of NGS Quality Control and Trimming

BioStar — Thu, 02 Jan 2025 20:11:07 -0600

Next-Generation Sequencing (NGS) has revolutionized biological research, providing vast amounts of data for a wide range of applications. However, the reliability of NGS analyses heavily depends on the quality of raw sequencing data. Quality control (QC) and trimming are critical preprocessing steps that can make or break your downstream analyses. In this blog, we explore the "ifs" (why you should perform QC and trimming) and the "buts" (challenges or considerations) of this vital step in NGS workflows.

The "Ifs" of NGS QC and Trimming

Ensures Data Integrity
If you want to minimize errors in downstream analyses, QC and trimming remove low-quality reads and bases, ensuring high-confidence data. This step is essential for reliable variant calling, assembly, and other applications.
Removes Contaminants
If adapter sequences or contaminants are present in the raw reads, trimming can eliminate them. This prevents issues like misalignment or incorrect biological interpretations, ensuring cleaner data for analysis.
Improves Mapping and Assembly
If your goal is better alignment to a reference genome or improved de novo assembly, trimming low-quality bases and adapters is critical. High-quality reads map more efficiently and generate more accurate assemblies.
Reduces Computational Load
If you want to save computational resources, trimming reduces the dataset size, which speeds up processing and analysis. Clean datasets mean less computational time spent on processing low-quality data.
Prepares for Standardized Analyses
If your project involves multiple datasets, QC and trimming ensure uniformity across them. This standardization makes comparisons valid and reproducible, particularly in large collaborative studies.

The "Buts" of NGS QC and Trimming

Risk of Over-Trimming
But excessive trimming can lead to the loss of informative sequences, reducing read depth and potentially discarding biologically relevant data. This is especially critical in studies with limited sequencing depth.
Bias Introduction
But trimming algorithms might introduce biases, especially if they inadvertently remove sequences with specific biological patterns. This can skew results and compromise biological insights.
Loss of Context in Paired-End Reads
But trimming one read in a pair more than the other can lead to loss of pairing information. This complicates downstream analyses that rely on paired-end data, such as structural variant detection.
Time and Resource Intensive
But running QC and trimming for large datasets can be computationally expensive and time-consuming. As sequencing depth increases, preprocessing becomes a bottleneck in the analysis pipeline.
Variable Standards
But the criteria for trimming (e.g., quality threshold, minimum read length) can vary between tools and datasets. This variability may affect reproducibility and comparability of results across studies.

Balancing the "Ifs" and "Buts"

To maximize the benefits of QC and trimming while mitigating the challenges, consider the following best practices:

Use QC Tools Wisely: Start with tools like FastQC to identify quality issues in your raw data. Visualizing quality metrics helps tailor your trimming parameters.
Choose Reliable Trimming Tools: Tools like Trimmomatic, Cutadapt, and BBduk offer adaptive and customizable trimming options. Select one that aligns with your dataset and project goals.
Set Reasonable Parameters: Avoid over-trimming by setting quality thresholds and minimum read lengths that balance data retention and quality improvement.
Test Downstream Effects: Validate the impact of QC and trimming on downstream analyses, such as alignment efficiency, variant calling accuracy, or assembly quality.
Document Your Workflow: Maintain detailed records of the parameters and tools used for QC and trimming. This ensures reproducibility and enables better troubleshooting.

Conclusion

NGS quality control and trimming are essential steps to ensure reliable and accurate data for analysis. While the "ifs" highlight the clear benefits of these steps, the "buts" remind us of the potential pitfalls. By adopting best practices and carefully balancing these considerations, you can optimize your preprocessing workflow and unlock the full potential of your sequencing data.

Recombination detection tool

Jit — Tue, 02 Feb 2016 10:11:14 -0600

A program to detect recombination hotspots using population genetic data.

More at https://github.com/auton1/LDhot

Address of the bookmark: https://github.com/auton1/LDhot

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

maf2synteny

Abhimanyu Singh — Thu, 18 May 2017 05:31:30 -0500

A tool for converting for recovering synteny blocks from multiple alignment (in MAF fromat)

This tool is a standalone version of Ragout module [http://fenderglass.github./Ragout]

Address of the bookmark: https://github.com/fenderglass/maf2synteny

PhyloGrapher - Graph Visualization Tool

Jit — Wed, 07 Mar 2018 18:11:25 -0600

PhyloGrapher is a program designed to visualize and study evolutionary relationships within families of homologous genes or proteins (elements). PhyloGrapher is a drawing tool that generates custom graphs for a given set of elements. In general, it is possible to use PhyloGrapher to visualize any type of relations between elements.

https://www.youtube.com/watch?v=WgufqYMHCvM

Address of the bookmark: http://www.atgc.org/PhyloGrapher/PhyloGrapher_Welcome.html