BOL: Related items

GTDB-Tk: A toolkit for assigning objective taxonomic classifications to bacterial and archaeal genomes.

Rahul Nayak — Wed, 22 Aug 2018 03:21:01 -0500

GTDB-Tk is a software toolkit for assigning objective taxonomic classifications to bacterial and archaeal genomes. It is computationally efficient and designed to work with recent advances that allow hundreds or thousands of metagenome-assembled genomes (MAGs) to be obtained directly from environmental samples. It can also be applied to isolate and single-cell genomes. The GTDB-Tk is open source and released under the GNU General Public License (Version 3).

GTDB-Tk is under active development and validation. Please independently confirm the GTDB-Tk predictions by manually inspecting the tree and bringing any discrepencies to our attention. Notifications about GTDB-Tk releases will be available through the ACE Twitter account (https://twitter.com/ace_uq).

Address of the bookmark: https://github.com/Ecogenomics/GTDBTk

TRITEX sequence assembly pipeline for Triticeae genomes

Jit — Tue, 20 Aug 2019 09:47:14 -0500

The pipeline is open-source and hosted in a public Bitbucket repository.

TRITEX has been run on highly inbred genotypes of barley (Hordeum vulgare), tetraploid wheat (Triticum turgidum) and hexaploid wheat (T. aestivum) with reasonable results: super-scaffold N50 values in the range of dozens of Mb and pseudomolecules with better gene space representation than a BAC-by-BAC assembly. It has never been tested and is not expected to work on heterozygous or autopolyploid genomes.

A protocol for generating chromosome-conformation capture sequencing (Hi-C) data suitable for use with the pipeline is described in Himmelbach et al. 2018. Refer to the technical notes of 10X Genomics on how to generate Chromium data.

Address of the bookmark: https://tritexassembly.bitbucket.io/

PhiSpy: PhiSpy identifies prophages in Bacterial (and probably Archaeal) genomes

Jit — Tue, 30 Jun 2020 21:36:19 -0500

PhiSpy identifies prophages in Bacterial (and probably Archaeal) genomes. Given an annotated genome it will use several approaches to identify the most likely prophage regions.

Initial versions of PhiSpy were written by

Sajia Akhter (sajia@stanford.edu) Edwards Bioinformatics Lab

Improvements, bug fixes, and other changes were made by

Katelyn McNair Edwards Bioinformatics Lab and Przemyslaw Decewicz DEMB at the University of Warsaw

Address of the bookmark: https://github.com/linsalrob/PhiSpy

LoReTTA, a user-friendly tool for assembling viral genomes from PacBio sequence data

Neel — Wed, 23 Jun 2021 07:54:53 -0500

LoReTTA (Long Read Template-Targeted Assembler), a tool designed for performing de novo assembly of long reads generated from viral genomes on the PacBio platform. LoReTTA exploits a reference genome to guide the assembly process, an approach that has been successful with short reads.

https://academic.oup.com/ve/article/7/1/veab042/6248116

Address of the bookmark: https://academic.oup.com/ve/article/7/1/veab042/6248116

NGenomeSyn: an easy-to-use and flexible tool for publication-ready visualization of syntenic relationships across multiple genomes

LEGE — Tue, 10 Sep 2024 04:54:55 -0500

NGenomeSyn: an easy-to-use and flexible tool for publication-ready visualization of syntenic relationships across multiple genomes

NGenomeSyn [multiple (N) Genome Synteny], for publication-ready visualization of syntenic relationships of the whole genome or local region and genomic features (e.g. repeats, structural variations, genes) across multiple genomes with a high customization. NGenomeSyn provides an easy way for its users to visualize a large amount of data with a rich layout by simply adjusting options for moving, scaling, and rotation of target genomes. Moreover, NGenomeSyn could be applied on the visualization of relationships on non-genomic data with similar input formats.

https://academic.oup.com/bioinformatics/article/39/3/btad121/7072460

Address of the bookmark: https://github.com/hewm2008/NGenomeSyn

RAMI: a tool for identification and characterization of phylogenetic clusters in microbial communities

Jit — Mon, 07 Aug 2017 18:49:27 -0500

RAMI, which clusters related nodes in a phylogenetic tree based on the patristic distance. RAMI also produces indices of cluster properties and other indices used in population and community studies on-the-fly.

Availability: RAMI is licensed under GNU GPL and can be run or downloaded from http://www.acgt.se/online.html.

Address of the bookmark: https://academic.oup.com/bioinformatics/article-lookup/doi/10.1093/bioinformatics/btp051

Orthoflow: workflow for phylogenetic inference of genome-scale datasets of protein-coding genes

LEGE — Wed, 21 Feb 2024 06:13:08 -0600

Orthoflow is a workflow for phylogenetic inference of genome-scale datasets of protein-coding genes. Our goal was to make it straightforward to work from a combination of input sources including annotated contigs in Genbank format and FASTA files containing CDSs. It uses several state of the art inference methods for orthology inference, either based on HMM profiles or de novo inference of orthogroups. Through the use of OrthoSNAP, many additional ortholog alignments can be generated from multi-copy gene families. For phylogenetic inference, users can choose a supermatrix approach and/or gene tree inference followed by supertree reconstruction. Users can specify a range of alignment filtering settings to retain high-quality alignments for phylogenetic inference. The workflow produces a detailed report that, in addition to the phylogenetic results, includes a range of diagnostics to verify the quality of the results.

Address of the bookmark: https://github.com/rbturnbull/orthoflow

Perl Special Vars Quick Reference

Abhimanyu Singh — Tue, 07 Feb 2017 05:08:47 -0600

`$_`	The default or implicit variable.
`@_`	Subroutine parameters.
`$a` `$b`	sort comparison routine variables.
`@ARGV`	The command-line args.
Regular Expressions
`$`	Regexp parenthetical capture holders.
`$&`	Last successful match (degrades performance).
`${^MATCH}`	Similar to `$&` without performance penalty. Requires /p modifier.
$`	Prematch for last successful match string (degrades performance).
`${^PREMATCH}`	Similar to $` without performance penalty. Requires `/p` modifier.
`$'`	Postmatch for last successful match string (degrades performance).
`${^POSTMATCH}`	Similar to `$'` without performance penalty. Requires `/p` modifier.
`$+`	Last paren match.
`$^N`	Last closed paren match (last submatch).
`@+`	Offsets of ends of successful submatches in scope.
`@-`	Offsets of starts of successful submatches in scope.
`%+`	Like `@+`, but for named submatches.
`%-`	Like `@-`, but for named submatches.
`$^R`	Last regexp (?{code}) result.
`${^RE_DEBUG_FLAGS}`	Current value of regexp debugging flags. See `use re 'debug';`
`${^RE_TRIE_MAXBUF}`	Control memory allocations for RE optimizations for large alternations.
Encoding
`${^ENCODING}`	The object reference to the Encode object, used to convert the source code to Unicode.
`${^OPEN}`	Internal use: \0 separated Input / Output layer information.
`${^UNICODE}`	Read-only Unicode settings.
`${^UTF8CACHE}`	State of the internal UTF-8 offset caching code.
`${^UTF8LOCALE}`	Indicates whether UTF8 locale was detected at startup.
IO and Separators
`$.`	Current line number (or record number) of most recent filehandle.
`$/`	Input record separator.
`$\|`	Output autoflush. 1=autoflush, 0=default. Applies to currently selected handle.
`$,`	Output field separator (lists)
`$\`	Output record separator.
`$"`	Output list separator. (interpolated lists)
`$;`	Subscript separator. (Use a real multidimensional array instead.)
Formats
`$%`	Page number for currently selected output channel.
`$=`	Current page length.
`$-`	Number of lines left on page.
`$~`	Format name.
`$^`	Name of top-of-page format.
`$:`	Format line break characters
`$^L`	Form feed (default "\f").
`$^A`	Format Accumulator
Status Reporting
`$?`	Child error. Status code of most recent system call or pipe.
`$!`	Operating System Error. (What just went 'bang'?)
`%!`	Error number hash
`$^E`	Extended Operating System Error (Extra error explanation).
`$@`	Eval error.
`${^CHILD_ERROR_NATIVE}`	Native status returned by the last pipe close, backtick (`` ) command, successful call to wait() or waitpid(), or from the system() operator.
ID's and Process Information
`$$`	Process ID
`$<`	Real user id of process.
`$>`	Effective user id of process.
`$(`	Real group id of process.
`$)`	Effective group id of process.
`$0`	Program name.
`$^O`	Operating System name.
Perl Status Info
`$]`	Old: Version and patch number of perl interpreter. Deprecated.
`$^C`	Current value of flag associated with -c switch.
`$^D`	Current value of debugging flags
`$^F`	Maximum system file descriptor.
`$^I`	Value of the -i (inplace edit) switch.
`$^M`	Emergency Memory pool.
`$^P`	Internal variable for debugging support.
`$^R`	Last regexp (?{code}) result.
`$^S`	Exceptions being caught. (eval)
`$^T`	Base time of program start.
`$^V`	Perl version.
`$^W`	Status of -w switch
`${^WARNING_BITS}`	Current set of warning checks enabled by `use warnings;`
`$^X`	Perl executable name.
`${^GLOBAL_PHASE}`	Current phase of the Perl interpreter.
`$^H`	Internal use only: Hook into Lexical Scoping.
`%^H`	Internaluse only: Useful to implement scoped pragmas.
`${^TAINT}`	Taint mode read-only flag.
`${^WIN32_SLOPPY_STAT}`	If true on Windows `stat()` won't try to open the file.
Command Line Args
`ARGV`	Filehandle iterates over files from command line (see also `<>`).
`$ARGV`	Name of current file when reading <>
`@ARGV`	List of command line args.
`ARGVOUT`	Output filehandle for -i switch
Miscellaneous
`@F`	Autosplit (-a mode) recipient.
`@INC`	List of library paths.
`%INC`	Keys are filenames, values are paths to modules included via `use, require,` or `do`.
`%ENV`	Hash containing current environment variables
`%SIG`	Signal handlers.
`$[`	Array and substr first element (Deprecated!).

See perlvar for detailed descriptions of each of these (and a few more) special variables.

pbalign: maps PacBio reads to reference sequences and saves alignments to a BAM file

Jit — Thu, 24 May 2018 10:06:52 -0500

pbalign aligns PacBio reads to reference sequences, filters aligned reads according to user-specific filtering criteria, and converts the output to either the SAM format or PacBio Compare HDF5 (e.g., .cmp.h5) format. The output Compare HDF5 file will be compatible with Quiver if --forQuiver option is specified.

Address of the bookmark: https://github.com/PacificBiosciences/pbalign

Postdoctoral Associate - Bioinformatics at Duke University Medical Center

Sat, 10 Aug 2013 18:38:38 -0500

The Department of Biostatistics and Bioinformatics at Duke University Medical Center is seeking a Postdoctoral Associate for a one year appointment to work on several high-dimensional research projects. The specific goals of the project are to identify genes or molecular markers that are predictive of clinical outcomes in renal and prostate cancer.

Candidates must have: a PhD degree in statistics, biostatistics or bioinformatics, extensive experience in analyzing high-dimensional data (microarray, SNP, CNVs) and of validation approaches. In addition, experience in penalized regression methods, data base manipulation; and strong programming skills in order to conduct Monte Carlo studies and applications (R). Candidate must have excellent communication skills (verbal, written and presentation), a strong proficiency in Linux system.

This position is available immediately and will be filled as soon as possible. Appointment could be extended beyond the first year based on additional funding.

For more information about the Department of Biostatistics and Bioinformatics, please visit our website: http://www.biostat.duke.edu.

For more info: http://biostat.duke.edu/sites/biostat.duke.edu/files/Halabi%20-%20Postdoc%20Job%20Posting%202013%20updated.pdf

Duke University is an Equal Opportunity/Affirmative Action Employer.