BOL: Related items

Mercator

Jit — Mon, 06 Feb 2017 04:20:36 -0600

Our basic strategy in building homology maps is to use exons that are orthologous in multiple genomes as map "anchors." Given K genomes, the steps in the map construction are as follows:

For each genome, obtain a set of exon annotations. These annotations can be a combination of both exon predictions (e.g. Genscan) and annotations that have been experimentally verified (e.g. RefSeq). Ideally, we would like to have these annotations be as sensitive as possible. Specificity is not a concern, as incorrect annotations are not likely not have significant alignments with other gene annotations.
Compare all exons against all exons in other genomes and record significant alignments between exons. Currently, we use BLAT to do this all-vs-all comparison with alignments being performed in protein space.
Construct a graph with each vertex corresponding to a exon and edges between vertices whose corresponding exons have significant alignments.
Identify cliques in this graph. These cliques are potential anchors to be used in the map.
Starting with the largest cliques (those that have exons in all or most of the genomes), join neighboring (adjacent in genomic coordinates, in each genome) cliques to form runs. Smaller cliques that are inconsistent with runs formed by larger cliques are filtered out. After the smallest cliques have been considered, cliques that are not part of a run are discarded.
The extents of each run in each genome are outputted as orthologous segments. The cliques from each run are used to output the exact genomic coordinates of anchors within each orthologous segment. These anchors can be used by genomic alignment programs (such as MAVID) to do a detailed alignment of each orthologous segment.

https://www.biostat.wisc.edu/~cdewey/mercator/

Address of the bookmark: https://www.biostat.wisc.edu/~cdewey/mercator/

ConPADE: Genome Assembly Ploidy Estimation from Next-Generation Sequencing Data

Jit — Fri, 24 Feb 2017 04:55:41 -0600

ConPADE (Contig Ploidy and Allele Dosage Estimation), a probabilistic method that estimates the ploidy of any given contig/scaffold based on its allele proportions. In the process, they report findings regarding errors in sequencing. The method can be used for whole genome shotgun (WGS) sequencing data. They also show applicability of the method for variant calling and allele dosage estimation. Results for simulated and real datasets are discussed and provide evidence that ConPADE performs well as long as enough sequencing coverage is available, or the true contig ploidy is low.

https://github.com/microsoftgenomics

Address of the bookmark: https://github.com/microsoftgenomics

splitbam: splits a BAM by chromosomes

Jit — Tue, 28 Feb 2017 09:01:28 -0600

splitbam splits a BAM by chromosomes.

Using the reference sequence dictionary (*.dict), it also creates some empty BAM files if no sam record was found for a chromosome. A pair of 'mock' SAM-Records can also be added to those empty BAMs to avoid some tools (like samtools) to crash.

Usage

java -jar splitbam.jar -p OUT/__CHROM__/__CHROM__.bam -R ref.fasta (bam|sam|stdin)

Options

-h help; This screen.
-R (indexed reference file) REQUIRED.
-u (unmapped chromosome name): default:Unmapped
-e | --empty : generate EMPTY bams for chromosome having no read mapped
-m | --mock : if option '-e', add a mock pair of sam records to the empty bam
-p (output file/bam pattern) REQUIRED. MUST contain __CHROM__ and end with .bam
-s assume input is sorted.
-x | --index create index.
-t | --tmp (dir) tmp file directory
-G (file) chrom-group file (see below)

Address of the bookmark: https://code.google.com/archive/p/jvarkit/wikis/SplitBam.wiki

Prokka: tool for the rapid annotation of prokaryotic genomes

Jit — Mon, 06 Mar 2017 03:49:57 -0600

Prokka is a software tool for the rapid annotation of prokaryotic genomes. A typical 4 Mbp genome can be fully annotated in less than 10 minutes on a quad-core computer, and scales well to 32 core SMP systems. It produces GFF3, GBK and SQN files that are ready for editing in Sequin and ultimately submitted to Genbank/DDJB/ENA.

Address of the bookmark: http://www.vicbioinformatics.com/software.prokka.shtml

COCACOLA (binning metagenomic contigs using sequence COmposition, read CoverAge, CO-alignment, and paired-end read LinkAge)

Jit — Tue, 07 Mar 2017 08:50:57 -0600

COCACOLA is a general framework that combines different types of information: sequence COmposition, CoverAge across multiple samples, CO-alignment to reference genomes and paired-end reads LinkAge to automatically bin contigs into OTUs. Furthermore, COCACOLA seamlessly embraces customized prior knowledge to facilitate binning accuracy.

News: Python version of COCACOLA is available now!

Address of the bookmark: https://github.com/younglululu/COCACOLA

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Jit — Wed, 19 Apr 2017 10:09:51 -0500

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Our work is published in Scientific Reports:

Ye, C. et al. DBG2OLC: Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies. Sci. Rep. 6, 31900; doi: 10.1038/srep31900 (2016).

http://www.nature.com/articles/srep31900

The manual can be downloaded from:

https://github.com/yechengxi/DBG2OLC/raw/master/Manual.docx

To use precompiled versions,please go to:

https://github.com/yechengxi/DBG2OLC/tree/master/compiled

Address of the bookmark: https://github.com/yechengxi/DBG2OLC

Download assemblies from NCBI

Bulbul — Mon, 15 May 2017 06:02:32 -0500

A new “Download assemblies” button is now available in the Assembly database. This makes it easy to download data for multiple genomes without having to write scripts.

For example, you can run a search in Assembly and use check boxes (see left side of screenshot below) to refine the set of genome assemblies of interest. Then, just open the “Download assemblies” menu, choose the source database (GenBank or RefSeq), choose the file type, and start the download. An archive file will be saved to your computer that can be expanded into a folder containing your selected genome data files.

More at https://ncbiinsights.ncbi.nlm.nih.gov/2017/05/08/genome-data-download-made-easy/

Genome Annotation Transfer Utility (GATU)

Jit — Mon, 29 May 2017 05:54:53 -0500

Genome Annotation Transfer Utility (GATU) was designed to facilitate quick, efficient annotation of similar genomes using genomes that have already been annotated. For example, whenever a new strain of SARS coronavirus is sequenced, it is possible, using GATU, to automatically annotate the new strain using a previously-annotated strain of SARS CoV. This saves researchers from tedious manual annotation of these sequences.

The program utilizes tBLASTn and BLASTn algorithms to map genes from the reference genome (the annotated strain) to the new sequence (the unannotated strain). The goal is to annotate the majority of the new genome’s genes in a single step. ORFs present in the target genome and absent from the reference genome are also identified; these ORFs can be further analyzed using BLAST, VGO and BBB. Afterwards, they can either be accepted for/rejected from annotation. GATU can handle multiple-exon genes as well as mature peptides. Although it was designed for use with viral genomes, GATU can also be used to help annotate larger genomes (ie. bacterial genomes).

The output is saved in GenBank, XML, or EMBL file format.

Address of the bookmark: https://virology.uvic.ca/help/tool-help/help-books/genome-annotation-transfer-utility-gatu-documentation/

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/