https://github.com/bcgsc/NanoSim

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart

More at https://genohub.com/ngs-instrument-guide/

Address of the bookmark: https://genohub.com/ngs-instrument-guide/

Computational methods used by the Shasta assembler include:

• Using a run-length representation of the read sequence. This makes the assembly process more resilient to errors in homopolymer repeat counts, which are the most common type of errors in Oxford Nanopore reads.
• Using in some phases of the computation a representation of the read sequence based on markers, a fixed subset of short k-mers (k ≈ 10).

More at https://chanzuckerberg.github.io/shasta/index.html

Address of the bookmark: https://github.com/chanzuckerberg/shasta

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

• Reasons to use Deepbinner:
  • To minimise the number of unclassified reads (use Deepbinner by itself).
  • To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
  • You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
• Reasons to not use Deepbinner:
  • You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
  • You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
  • You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Address of the bookmark: http://www.eurekalert.org/multimedia/pub/71198.php

Address of the bookmark: https://github.com/holtjma/fmlrc

The Department of Informatics is a vacant position as a researcher in computer science, related to Computational Biology Unit (CBU), for 3 years.

The position is part of CBU Service Group and will focus on bioinformatic analysis project and especially the analysis of high-throughput data, including NGS (sequencing), and proteomics data.

The successful candidate will be part of the Norwegian bioinformatics platform's national helpdesk within the project ELIXIR.NO

Applicants must hold a PhD in a relevant subject such as computer science, mathematics, molecular biology and also possess expertise and experience in bioinformatics statistics and analysis of data from high-throughput molecular experiment.

Basic programming or scripting skills are required. Experience in Python, R, Perl, Linux-based operating systems and moreover knowledge of databases and web programming will be a strength for applicants.

We expect enthusiasm and independence and moreover the ability to work in an interdisciplinary team environment.

Good knowledge of English is required.

Salaries start at level 57 (code 1109/LR 24.1) by appointment. Further promotion occurs after
service seniority in the position (at grade 57-65). Of particularly highly qualified applicants may be considered a higher salary.

Further information about the position is available from the chair of the CBU,
Professor Inge Jonassen, e-mail: Inge.Jonassen @ ii.uib.no

The successful applicant must comply with the guidelines that apply at any given time the position.

State employment shall as far as possible reflect the diversity of the population. It is therefore an objective to achieve a balanced age and sex composition and the recruitment of persons with immigrant backgrounds. Persons with immigrant background are requested to apply for the position.

Women are particularly encouraged to apply. If the experts find that several applicants have approximately equivalent qualifications, the rules on equal in the Personnel Regulations for Academic Positions will be applied.

University of Bergen applies the principles of public openness when recruiting staff to scientific positions.

Information about the applicant may be made public even though the applicant has requested not to be named in the list of applicants. If the request does not host admitted to the result, the applicant shall be notified of this.

Send application, CV, certificates, diplomas, undergraduate work and a list of publications (list of publications) online by clicking on https://www.jobbnorge.no/jobbsoknet/login.aspx?returnurl=/jobbsoknet/jobapplication.aspx?jobid=95196

You need to upload certified translations into English or a Scandinavian language of appendices, such as diplomas and transcripts.

Applications sent by email to individuals at the institute will not be considered.

Deadline: 9 August 2013

Dated : 22 Nov 2013 -23 Nov 2013

http://www.ngsasia-congress.com/