BOL: Related items

nanofilt: Filtering and trimming of long read sequencing data

Jit — Mon, 30 Jul 2018 12:01:52 -0500

Filtering on quality and/or read length, and optional trimming after passing filters.
Reads from stdin, writes to stdout.

Intended to be used:

directly after fastq extraction
prior to mapping
in a stream between extraction and mapping

https://github.com/wdecoster/nanofilt

Address of the bookmark: https://github.com/wdecoster/nanofilt

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

Scaffolding of a bacterial genome using MinION nanopore sequencing

Rahul Agarwal — Tue, 07 Jul 2015 16:59:25 -0500

Second generation sequencing has revolutionized genomic studies. However, most genomes contain repeated DNA elements that are longer than the read lengths achievable with typical sequencers, so the genomic order of several generated contigs cannot be easily resolved. A new generation of sequencers offering substantially longer reads is emerging, notably the Pacific Biosciences (PacBio) RS II system and the MinION system, released in early 2014 by Oxford Nanopore Technologies through an early access program.

Address of the bookmark: http://www.nature.com/srep/2015/150707/srep11996/full/srep11996.html

FiNGS: Filters for Next Generation Sequencing

Neel — Sat, 27 Feb 2021 01:18:35 -0600

Key features

Filters SNVs from any variant caller to remove false positives
Calculates metrics based on BAM files and provides filtering not possible with other tools
Fully user-configurable filtering (including which filters to use and their thresholds)
Option to use filters identical to ICGC recommendations

FiNGS provides researchers with a tool to reproducibly filter somatic variants that is simple to both deploy and use, with filters and thresholds that are fully configurable by the user. It ingests and emits standard variant call format (VCF) files and will slot into existing sequencing pipelines. It allows users to develop and implement their own filtering strategies and simple sharing of these with others.

FiNGS reliably improves upon the precision of default variant caller outputs and performs better than other tools designed for the same task.

Address of the bookmark: https://github.com/cpwardell/FiNGS

Libraries or management tools for high throughput sequencing data

LEGE — Fri, 04 Oct 2024 02:45:06 -0500

GATB Library. The Genome Analysis Toolbox with de-Bruijn graph. A large part of tools developed by the GenScale team are based on this library.
These methods enable the analysis of data sets of any size on multi-core desktop computers, including very huge amount of reads data coming from any kind of organisms such as bacteria, plants, animals and even complex samples (e.g. metagenomes). Among them are (the full is available here: https://gatb.inria.fr/software/):
LRez: C++ Library and toolkit for the barcode-based management and indexation of linked-read datasets.

Variant calling and/or genotyping

DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
MindTheGap: Detection and assembly of large insertion variants
TakeABreak: reference-free inversion discovery tool
SVJedi: Structural Variant genotyper with long read data
SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

MinYS: reference-guided genome assembly in metagenomics data
MTG-link: local assembly tool for linked-read data
Minia: De novo short read assembler
de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
- fimpera extends findere adding the abundance information.
kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
Backpack Quotient Filter: k-mer indexing data structure with abundance
short read connector: Detect similar reads from potentially large read set
DSK: Count K-mer in sequences

Pangenome graph manipulation

Pancat: Pangenome Comparison and Analysis Toolkit
GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

Simka and SimkaMin: Comparative metagenomics for large-scale datasets
Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

GASSST: long read mapper
Leon: short read compressor (now included in GATB-core)
Bloocoo: short read corrector
BCALM: Construct compacted de Bruijn graphs (unitigs)

Protein Structure

A_Purva: Contact Map Overlap solver
MD-Jeep: Distance Geometry solver
CSA: Comparative Structural Alignment

Workflow

SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

CASSIS: detection of rearrangement breakpoints
PLAST: intensive bank-to-bank sequence comparison
DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

Shasta long read assembler

Jit — Tue, 14 Jan 2020 06:47:07 -0600

The goal of the Shasta long read assembler is to rapidly produce accurate assembled sequence using as input DNA reads generated by Oxford Nanopore flow cells.

Computational methods used by the Shasta assembler include:

Using a run-length representation of the read sequence. This makes the assembly process more resilient to errors in homopolymer repeat counts, which are the most common type of errors in Oxford Nanopore reads.
Using in some phases of the computation a representation of the read sequence based on markers, a fixed subset of short k-mers (k ≈ 10).

More at https://chanzuckerberg.github.io/shasta/index.html

Address of the bookmark: https://github.com/chanzuckerberg/shasta

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Rahul Agarwal — Mon, 06 Jul 2015 08:46:53 -0500

GraphMap is a novel mapper targeted at aligning long, error-prone third-generation sequencing data.
It is designed to handle Oxford Nanopore MinION 1d and 2d reads with very high sensitivity and accuracy, and also presents a significant improvement over the state-of-the-art for PacBio read mappers.

GraphMap was also designed for ease-of-use: the default parameters can handle a wide range of read lengths and error profiles, including: Illumina, PacBio and Oxford Nanopore.
This is an especially important feature for technologies where the error rates and error profiles can vary widely across, or even within, sequencing runs.

http://biorxiv.org/content/early/2015/06/10/020719

Address of the bookmark: https://github.com/isovic/graphmap

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye

LRCstats: Long Read Correction Statistics

Jit — Fri, 05 Jan 2018 04:04:20 -0600

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Of course, some long read correction algorithms are better than others, and developers of long read correction algorithms will wish to compare their algorithm with others currently available. LRCstats benchmarks long read correction algorithms using long reads produced by simulators (such as SimLoRD or PBSim) where the two-way alignments between the uncorrected long reads (uLR) and the corresponding sequences in the reference genome (Ref) are given in some sort of alignment file and then aligning the corrected long reads (cLR) to the Ref-uLR two-way alignments to create three-way alignments using a dynamic programming algorithm. Statistics on these three-way alignments are then collected, such as the overall error rates of the corrected long reads.

https://www.healthcare.uiowa.edu/labs/au/LSC/

Address of the bookmark: https://github.com/cchauve/lrcstats

How to sequence the human genome - Mark J. Kiel

Fri, 30 May 2014 13:24:11 -0500

View full lesson: http://ed.ted.com/lessons/how-to-sequence-the-human-genome-mark-j-kiel Your genome, every human's genome, consists of a unique DNA sequence of A's, T's, C's and G's that tell your cells how to operate. Thanks to technological advances, scientists are now able to know the sequence of letters that makes up an individual genome relatively quickly and inexpensively. Mark J. Kiel takes an in-depth look at the science behind the sequence. Lesson by Mark J. Kiel, animation by Marc Christoforidis.