BOL: Related items

coursera genome assembly tutorial

Jit — Sat, 25 Nov 2017 08:57:25 -0600

Solutions to Coursera Genome Sequencing (Bioinformatics II)

Address of the bookmark: https://github.com/iansealy/coursera-assembly

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Mash: fast genome and metagenome distance estimation using MinHash

Jit — Tue, 12 Dec 2017 17:30:12 -0600

Mash is normally distributed as a dependency-free binary for Linux or OSX (see https://github.com/marbl/Mash/releases). This source distribution is intended for other operating systems or for development. Mash requires c++11 to build, which is available in and GCC >= 4.8 and OSX >= 10.7.

See http://mash.readthedocs.org for more information.

Address of the bookmark: https://github.com/marbl/Mash/releases

Circlator: automated circularization of genome assemblies using long sequencing reads

Poonam Mahapatra — Tue, 15 May 2018 09:42:32 -0500

A tool to circularize genome assemblies. The algorithm and benchmarks are described in the Genome Biology manuscript. Citation: "Circlator: automated circularization of genome assemblies using long sequencing reads", Hunt et al, Genome Biology 2015 Dec 29;16(1):294. doi: 10.1186/s13059-015-0849-0. PMID: 26714481.

Address of the bookmark: http://sanger-pathogens.github.io/circlator/

PRICE (Paired-Read Iterative Contig Extension), a de novo genome assembler implemented in C++.

Surabhi Chaudhary — Mon, 11 Jun 2018 03:08:26 -0500

We are pleased to release PRICE (Paired-Read Iterative Contig Extension), a de novo genome assembler implemented in C++. Its name describes the strategy that it implements for genome assembly: PRICE uses paired-read information to iteratively increase the size of existing contigs. Initially, those contigs can be individual reads from a subset of the paired-read dataset, non-paired reads from sequencing technologies that provide non-paired data, or contigs that were output from a prior run of PRICE or any other assembler. http://derisilab.ucsf.edu/software/price/

Address of the bookmark: http://derisilab.ucsf.edu/software/price/

LINKS scaffolder bloomfilter setting !

Jit — Fri, 15 Jun 2018 10:39:54 -0500

➜ bin git:(master) ✗ ls -l
total 68
drwxrwxr-x 3 urbe urbe 4096 Jun 15 12:15 lib
-rwxrwxrwx 1 urbe urbe 65141 Jun 15 17:13 LINKS
➜ bin git:(master) ✗ pwd
/home/urbe/Tools/LINKS_1.8.6/bin

➜ bloomfilter git:(master) ✗ swig -Wall -c++ -perl5 BloomFilter.i
➜ bloomfilter git:(master) ✗ g++ -c BloomFilter_wrap.cxx -I/home/urbe/anaconda3/lib/perl5/5.22.0/x86_64-linux-thread-multi/CORE/ -fPIC -Dbool=char -O3
BloomFilter_wrap.cxx:1892:30: fatal error: ../BloomFilter.hpp: No such file or directory
compilation terminated.
➜ bloomfilter git:(master) ✗ cd swig
➜ swig git:(master) ✗ g++ -c BloomFilter_wrap.cxx -I/home/urbe/anaconda3/lib/perl5/5.22.0/x86_64-linux-thread-multi/CORE/ -fPIC -Dbool=char -O3
In file included from BloomFilter_wrap.cxx:1877:0:
../BloomFilter.hpp: In member function ‘void BloomFilter::loadHeader(FILE*)’:
../BloomFilter.hpp:141:59: warning: ignoring return value of ‘size_t fread(void*, size_t, size_t, FILE*)’, declared with attribute warn_unused_result [-Wunused-result]
fread(&header, sizeof(struct FileHeader), 1, file);
^
➜ swig git:(master) ✗ g++ -Wall -shared BloomFilter_wrap.o -o BloomFilter.so -O3
➜ swig git:(master) ✗ cd ..
➜ bloomfilter git:(master) ✗ cd ..
➜ lib git:(master) ✗ cd ..
➜ bin git:(master) ✗ ./LINKS
Usage: ./LINKS [v1.8.6]
-f sequences to scaffold (Multi-FASTA format, required)
-s file-of-filenames, full path to long sequence reads or MPET pairs [see below] (Multi-FASTA/fastq format, required)
-m MPET reads (default -m 1 = yes, default = no, optional)
! DO NOT SET IF NOT USING MPET. WHEN SET, LINKS WILL EXPECT A SPECIAL FORMAT UNDER -s
! Paired MPET reads in their original outward orientation <- -> must be separated by ":"
>template_name
ACGACACTATGCATAAGCAGACGAGCAGCGACGCAGCACG:ATATATAGCGCACGACGCAGCACAGCAGCAGACGAC
-d distance between k-mer pairs (ie. target distances to re-scaffold on. default -d 4000, optional)
Multiple distances are separated by comma. eg. -d 500,1000,2000,3000
-k k-mer value (default -k 15, optional)
-t step of sliding window when extracting k-mer pairs from long reads (default -t 2, optional)
Multiple steps are separated by comma. eg. -t 10,5
-o offset position for extracting k-mer pairs (default -o 0, optional)
-e error (%) allowed on -d distance e.g. -e 0.1 == distance +/- 10% (default -e 0.1, optional)
-l minimum number of links (k-mer pairs) to compute scaffold (default -l 5, optional)
-a maximum link ratio between two best contig pairs (default -a 0.3, optional)
*higher values lead to least accurate scaffolding*
-z minimum contig length to consider for scaffolding (default -z 500, optional)
-b base name for your output files (optional)
-r Bloom filter input file for sequences supplied in -s (optional, if none provided will output to .bloom)
NOTE: BLOOM FILTER MUST BE DERIVED FROM THE SAME FILE SUPPLIED IN -f WITH SAME -k VALUE
IF YOU DO NOT SUPPLY A BLOOM FILTER, ONE WILL BE CREATED (.bloom)
-p Bloom filter false positive rate (default -p 0.001, optional; increase to prevent memory allocation errors)
-x Turn off Bloom filter functionality (-x 1 = yes, default = no, optional)
-v Runs in verbose mode (-v 1 = yes, default = no, optional)

Error: Missing mandatory options -f and -s.

ERROR fixed

perl: symbol lookup error: /home/urbe/Tools/LINKS_new/bin/./lib/bloomfilter/swig/BloomFilter.so: undefined symbol: Perl_Gthr_key_ptr

Converting a VCF into a FASTA given some reference !

Jit — Fri, 20 Jul 2018 10:03:53 -0500

Samtools/BCFtools (Heng Li) provides a Perl script vcfutils.pl which does this, the function vcf2fq (lines 469-528)

This script has been modified by others to convert InDels as well, e.g. this by David Eccles

./vcf2fq.pl -f <input.fasta> <all-site.vcf> > <output.fastq>

https://github.com/gringer/bioinfscripts/blob/master/vcf2fq.pl

https://github.com/lh3/samtools/blob/master/bcftools/vcfutils.pl

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

Long read assembly workshop !

Rahul Nayak — Thu, 04 Oct 2018 17:23:18 -0500

This is a tutorial for a workshop on long-read (PacBio) genome assembly.

It demonstrates how to use long PacBio sequencing reads to assemble a bacterial genome, and includes additional steps for circularising, trimming, finding plasmids, and correcting the assembly with short-read Illumina data.

Please comment if you know any other long read addembly tutorial.

Address of the bookmark: http://sepsis-omics.github.io/tutorials/modules/cmdline_assembly_v2/

Synima: a Synteny imaging tool for annotated genome assemblies

Abhimanyu Singh — Tue, 30 Oct 2018 10:49:13 -0500

Synima written in Perl, which uses the graphical features of R. Synima takes orthologues computed from reciprocal best BLAST hits or OrthoMCL, and DAGchainer, and outputs an overview of genome-wide synteny in PDF. Each of these programs are included with the Synima package, and a pipeline for their use. Synima has a range of graphical parameters including size, colours, order, and labels, which are specified in a config file generated by the first run of Synima – and can be subsequently edited. Synima runs quickly on a command line to generate informative and publication quality figures. Synima is open source and freely available from https://github.com/rhysf/Synima under the MIT License.

Address of the bookmark: https://github.com/rhysf/Synima