BOL: Related items

Mugsy: multiple whole genome alignment tool

Jit — Fri, 08 Dec 2017 17:41:14 -0600

Mugsy is a multiple whole genome aligner. Mugsy uses Nucmer for pairwise alignment, a custom graph based segmentation procedure for identifying collinear regions, and the segment-based progressive multiple alignment strategy from Seqan::TCoffee. Mugsy accepts draft genomes in the form of multi-FASTA files and does not require a reference genome.

To cite Mugsy, use:

Angiuoli SV and Salzberg SL. Mugsy: Fast multiple alignment of closely related whole genomes.Bioinformatics 2011 27(3):334-4

Address of the bookmark: http://mugsy.sourceforge.net/

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

swgis v2.0 : a seqword genomic island sniffer

Abhimanyu Singh — Thu, 01 Nov 2018 12:35:52 -0500

swgis v2.0 is the modified version of the seqword genomic island sniffer. this version is specifically optimized for predicting genomic islands in eukaryotic genomes. swgis v2.0 was tested on several eukaryotic species of different lineages. all identified genomic islands were deposited in the eugi database.

download swgis v2.0

Address of the bookmark: http://eugi.bi.up.ac.za/eugi_download_swgis.php

AirLift, a methodology and tool for comprehensively moving mappings and annotations from one genome to another similar genome

Jit — Mon, 23 Dec 2019 10:20:13 -0600

We propose AirLift, a methodology and tool for comprehensively moving mappings and annotations from one genome to another similar genome while maintaining the accuracy of a full mapper.

Address of the bookmark: https://github.com/CMU-SAFARI/AirLift

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Maq: Mapping and Assembly with Quality

Jit — Tue, 22 Nov 2016 04:51:39 -0600

Maq stands for Mapping and Assembly with Quality It builds assembly by mapping short reads to reference sequences. Maq is a project hosted by SourceForge.net. The project page is available athttp://sourceforge.net/projects/maq/. Maq is previously known as mapass2.

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

Prepare a reference sequence (ref.fasta). Better a bacterial genome.
Download maq, maq-data and maqview at the download page.
Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:
```
maq.pl demo ref.fasta calib-30.dat
```
where calib-30.dat is contained in maq-data.

View the alignment:

cd maqdemo/easyrun;
maqindex -i -c consensus.cns all.map;
maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

LACHESIS: Genome Assembly with Hi-C-based Contact Probability Maps (LACHESIS)

Jit — Mon, 14 May 2018 04:26:30 -0500

LACHESIS is method that exploits contact probability map data (e.g. from Hi-C) for chromosome-scale de novo genome assembly.

Further information about LACHESIS, including source code, documentation and a user's guide are available at: http://shendurelab.github.io/LACHESIS.

Manuscript describing LACHESIS was published as: Burton JN#, Adey A, Patwardhan RP, Qiu R, Kitzman JO, Shendure J#. Chromosome-scale scaffolding of de novo genome assemblies based on chromatin interactions. Nature Biotechnology 2013 Dec;31(12):1119-25. doi: 10.1038/nbt.272. PubMed PMID: 24185095.

http://shendurelab.github.io/LACHESIS/

Address of the bookmark: http://shendurelab.github.io/LACHESIS/

BAUM – Improving Genome Assembly by Adaptive Unique Mapping and Local Overlap-Layout-Consensus

Jit — Wed, 24 Oct 2018 23:35:09 -0500

BAUM, breaks the whole genome into regions by adaptive unique mapping; then the local OLC is used to assemble each region in parallel. BAUM can: (1) perform reference-assisted assembly based on the genome of a close species; (2) or improve the results of existing assemblies that are obtained based on short or long sequencing reads.

Address of the bookmark: http://www.zhanyuwang.xin/wordpress/index.php/2017/07/21/baum-improving-genome-assembly-by-adaptive-unique-mapping-and-local-overlap-layout-consensus/

Genobuntu: Package for Next Generation Sequencing and Genome Assembly

BioStar — Mon, 18 May 2020 16:47:56 -0500

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

Therefore, Genobuntu offers a well-tailored environment for both novices and experts working in the field of genome assembly.

Features

Velvet
MiB
SSAKE
EULER
VCAKE
ABySS
ALLPATHS
Celera
SHARCGS
Allpaths
IDBA
TAIPAN
Edena
SOAPdenovo
Maq
IDBA-UD
No. of Reads present in the Ref. Seq.
ART NGS Reads Simulator
HiTEC, FASTQC
Minimum Description Length
SOAPaligner
Sequencing Read Archive Toolkit

Address of the bookmark: https://sourceforge.net/projects/genobuntu/