BOL: Related items

Wtdbg2: a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore

Neel — Fri, 19 Oct 2018 08:48:43 -0500

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output. Wtdbg2 is able to assemble the human and even the 32Gb Axolotl genome at a speed tens of times faster than CANU and FALCONwhile producing contigs of comparable base accuracy.

Address of the bookmark: https://github.com/ruanjue/wtdbg2

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

Salzberg lab

Mon, 15 May 2017 05:14:01 -0500

We are a computational biology lab that develops novel methods for analysis of DNA and RNA sequences. Our research includes software for aligning and assembling RNA-seq data, whole-genome assembly, and microbiome analysis. We work closely with biomedical scientists to apply these methods to current problems arising in a broad spectrum of biological and medical research areas. We’re also part of the Center for Computational Biology, a group of 20+ faculty members and their labs at Johns Hopkins working on computational, statistical, and mathematical methods that can turn massive genomic data sets into biologically and clinically useful information.

https://salzberg-lab.org/

SIMBA: a web tool for managing bacterial genome assembly generated by Ion PGM sequencing technology

Abhimanyu Singh — Tue, 23 May 2017 05:28:56 -0500

SIMBA, SImple Manager for Bacterial Assemblies, is a Web interface for managing assembly projects of bacterial genomes. SIMBA was created to assist bioinformaticians to assemble bacterial genomes sequenced with NextGeneration Sequencing (NGS) platforms quickly, easily and effectively. SIMBA also is open source tool, i.e., can be freely downloaded, shared and modified.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1344-7

Address of the bookmark: http://ufmg-simba.sourceforge.net/

Apollo: A Sequencing-Technology-Independent, Scalable, and Accurate Assembly Polishing Algorithm

BioStar — Mon, 16 Mar 2020 10:09:26 -0500

Apollo is an assembly polishing algorithm that attempts to correct the errors in an assembly. It can take multiple set of reads in a single run and polish the assemblies of genomes of any size. Described by Firtina et al. (preliminary version at https://arxiv.org/pdf/1902.04341.pdf

More at https://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btaa179/5804978?rss=1

Address of the bookmark: https://github.com/CMU-SAFARI/Apollo

Is reference genome necessary for gene expression study in transcriptome sequencing or for variant discovery in genome sequencing?

Rahul Agarwal — Wed, 17 Jul 2013 15:25:09 -0500

Like in case of plant genomes where nature of genome is too complex and huge in size to accomplish complete de novo assembly by current sequencing technology. What would be alternate solution? Can we live in reference free world?