BOL: Related items

Libraries or management tools for high throughput sequencing data

LEGE — Fri, 04 Oct 2024 02:45:06 -0500

GATB Library. The Genome Analysis Toolbox with de-Bruijn graph. A large part of tools developed by the GenScale team are based on this library.
These methods enable the analysis of data sets of any size on multi-core desktop computers, including very huge amount of reads data coming from any kind of organisms such as bacteria, plants, animals and even complex samples (e.g. metagenomes). Among them are (the full is available here: https://gatb.inria.fr/software/):
LRez: C++ Library and toolkit for the barcode-based management and indexation of linked-read datasets.

Variant calling and/or genotyping

DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
MindTheGap: Detection and assembly of large insertion variants
TakeABreak: reference-free inversion discovery tool
SVJedi: Structural Variant genotyper with long read data
SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

MinYS: reference-guided genome assembly in metagenomics data
MTG-link: local assembly tool for linked-read data
Minia: De novo short read assembler
de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
- fimpera extends findere adding the abundance information.
kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
Backpack Quotient Filter: k-mer indexing data structure with abundance
short read connector: Detect similar reads from potentially large read set
DSK: Count K-mer in sequences

Pangenome graph manipulation

Pancat: Pangenome Comparison and Analysis Toolkit
GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

Simka and SimkaMin: Comparative metagenomics for large-scale datasets
Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

GASSST: long read mapper
Leon: short read compressor (now included in GATB-core)
Bloocoo: short read corrector
BCALM: Construct compacted de Bruijn graphs (unitigs)

Protein Structure

A_Purva: Contact Map Overlap solver
MD-Jeep: Distance Geometry solver
CSA: Comparative Structural Alignment

Workflow

SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

CASSIS: detection of rearrangement breakpoints
PLAST: intensive bank-to-bank sequence comparison
DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

MafTools

Jit — Thu, 16 Feb 2017 11:16:01 -0600

maftools - An R package to summarize, analyze and visualize MAF files. Introduction.

With advances in Cancer Genomics, Mutation Annotation Format (MAF) is being widley accepted and used to store variants detected. The Cancer Genome Atlas Project has seqenced over 30 different cancers with sample size of each cancer type being over 200. The resulting data consisting of genetic variants is stored in the form of Mutation Annotation Format. This package attempts to summarize, analyze, annotate and visualize MAF files in an efficient manner either from TCGA sources or any in-house studies as long as the data is in MAF format. Maftools can also handle ICGC Simple Somatic Mutation format.

maftools is on bioRxiv

Please cite the below if you find this tool useful for you.

Mayakonda, A. and H.P. Koeffler, Maftools: Efficient analysis, visualization and summarization of MAF files from large-scale cohort based cancer studies. bioRxiv, 2016. doi: http://dx.doi.org/10.1101/052662

Address of the bookmark: https://github.com/PoisonAlien/maftools

ECTOOLS: Long Read Correction and other Correction tools

Jit — Fri, 05 Jan 2018 04:02:22 -0600

Long Read Correction and other Correction tools

This package is a loose collection of scripts. To run the correction
routine see the section below. Descriptions of the other scripts
are at the bottom of this file.

Contact: gurtowsk@cshl.edu

In short, the correction algorithm takes as input the unitigs from a short read assembly and uses them to correct long read data. More background information for the algorithm can be found:
http://schatzlab.cshl.edu/presentations/2013-06-18.PBUserMeeting.pdf

Address of the bookmark: https://github.com/jgurtowski/ectools

PEAR: a fast and accurate Illumina Paired-End reAd mergeR

Jit — Wed, 06 Apr 2016 13:27:23 -0500

PEAR is an ultrafast, memory-efficient and highly accurate pair-end read merger. It is fully parallelized and can run with as low as just a few kilobytes of memory.

PEAR evaluates all possible paired-end read overlaps and without requiring the target fragment size as input. In addition, it implements a statistical test for minimizing false-positive results. Together with a highly optimized implementation, it can merge millions of paired end reads within a couple of minutes on a standard desktop computer.

More at http://www.exelixis-lab.org/web/software/pear

Paper: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3933873/

Address of the bookmark: http://www.exelixis-lab.org/web/software/pear

LAMSA: fast split read alignment with long approximate matches

Jit — Tue, 15 May 2018 04:44:42 -0500

LAMSA (Long Approximate Matches-based Split Aligner) is a novel split alignment approach with faster speed and good ability of handling SV events. It is well-suited to align long reads (over thousands of base-pairs). LAMSA takes takes the advantage of the rareness of SVs to implement a specifically designed two-step strategy. That is, LAMSA initially splits the read into relatively long fragments and co-linearly align them to solve the small variations or sequencing errors, and mitigate the effect of repeats. The alignments of the fragments are then used for implementing a sparse dynamic programming (SDP)-based split alignment approach to handle the large or non-co-linear variants. We benchmarked LAMSA with simulated and real datasets having various read lengths and sequencing error rates, the results demonstrate that it is substantially faster than the state-of-the-art long read aligners; mean-while, it also has good ability to handle various categories of SVs. LAMSA is open source and free for non-commercial use. LAMSA is mainly designed by Bo Liu & Yan Gao and developed by Yan Gao in Center for Bioinformatics, Harbin Institute of Technology, China.

Address of the bookmark: https://github.com/hitbc/LAMSA

nanofilt: Filtering and trimming of long read sequencing data

Jit — Mon, 30 Jul 2018 12:01:52 -0500

Filtering on quality and/or read length, and optional trimming after passing filters.
Reads from stdin, writes to stdout.

Intended to be used:

directly after fastq extraction
prior to mapping
in a stream between extraction and mapping

https://github.com/wdecoster/nanofilt

Address of the bookmark: https://github.com/wdecoster/nanofilt

URMAP, an ultra-fast read mapper

Jit — Thu, 29 Oct 2020 23:03:54 -0500

URMAP, a new read mapping algorithm. URMAP is an order of magnitude faster than BWA with comparable accuracy on several validation tests. On a Genome in a Bottle (GIAB) variant calling test with 30× coverage 2×150 reads, URMAP achieves high accuracy (precision 0.998, sensitivity 0.982 and F-measure 0.990) with the strelka2 caller. However, GIAB reference variants are shown to be biased against repetitive regions which are difficult to map and may therefore pose an unrealistically easy challenge to read mappers and variant callers.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7320720/

Address of the bookmark: https://github.com/rcedgar/urmap

Scalpel

Shruti Paniwala — Wed, 20 Aug 2014 02:07:58 -0500

A team from Cold Spring Harbor Laboratory has released an algorithm, called Scalpel, for finding insertions and deletions in next generation sequencing data sets. Scalpel, which is open source and available for download on SourceForge, outperformed the popular tools GATK HaplotypeCaller and SOAPindel in test runs on both simulated and real whole human exomes.

Like other indel callers, Scalpel works by performing de novo assembly of regions of interest, so that misalignment to the reference genome cannot obscure the presence of an insertion or deletion. Scalpel's innovation is to repeatedly check its assembly before comparing to the reference genome, to account for simple sequence repeats that are a regular source of error in indel calling. When Scalpel assembles an exon, it collects reads that map to that exon (including partial matches), splits them into k-mers, and creates a de Bruijn graph to span the exon; however, if it detects repeats in the map, it iteratively increases the size of the k-mers by one base until the repeats are eliminated. This ensures that the final assembly of the exon is highly accurate while minimizing compute time.

The Cold Spring Harbor team's validation of Scalpel, published over the weekend in Nature Methods, compares Scalpel's performance on a live whole exome against HaplotypeCaller and SOAPindel. The donor is an individual with serious neurological disorders, which may be linked to a high incidence of indels. One thousand indels from this individual's exome, called by one or more of the informatics pipelines, were selected for focused resequencing. This resequencing revealed a 77% true positive rate for Scalpel calls, dramatically better than the rates for either of the competing tools; Scalpel performed especially well with indels longer than five base pairs, a traditional weak point for indel callers.

Finally, the authors demonstrate Scalpel's use on a large set of genetic data from nearly 600 families who donated samples to the Simons Simplex Collection, a project of the Simons Foundation Autism Research Initiative. Scalpel found a very high enrichment for indels in children affected by autism, compared with their unaffected siblings, a pattern that persisted even after excluding common variants.

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

Andi

Jit — Fri, 13 May 2016 05:16:35 -0500

This is the andi program for estimating the evolutionary distance between closely related genomes. These distances can be used to rapidly infer phylogenies for big sets of genomes. Because andi does not compute full alignments, it is so efficient that it scales even up to thousands of bacterial genomes.

This readme covers all necessary instructions for the impatient to get andi up and running. For extensive instructions please consult the manual.

More at https://github.com/evolbioinf/andi/

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2015/01/13/bioinformatics.btu815.full